Universal Swivel/Table Top TV Stand 27 to 60 inch TVs 80 Degree Swivel, 4 Level Height Adjustable, Heavy Duty Tempered Glass Base, Holds up to 99lbs Screens, HT04B-001

I'm actually quite impressed at how well thought out the instructions and packaging are for this stand. The instructions are primarily in the form of pictures, but the pictures are really all you need, aside from very clear descriptions of precisely which screws to use for each step of assembly. Additionally, the assortment of screws come packaged in a strip pack, with each individual size clearly marked and labeled for ease of assembly, a dual purpose hex key/phillips screw driver, and small open end wrench are included for assembly, so no additional tools are necessary, but a regular phillips screw driver will speed assembly up. I first assembled the stand itself, then carried everything to the family room where the set it's going on (or rather that's going on it) is located, and carefully followed the instructions to install the set on the stand after removing the oem stand from the set. Having enough room to work is essential, as you don't want to be banging the set around, and it makes assembly much easier. When I first hung the set on the stand, it was within a fraction of an inch of the base, so I first adjusted the brackets on the set down a notch, and then the vertical arm on the base up a notch, and all was good. There is an almost infinite number of adjustment combinations that you can make between the two, so height fine tuning should be a non-issue. The screw kit includes an assortment to fit almost any sets VESA mount holes, and the mount brackets are long enough to fit virtually any set as well. I like the way the VESA brackets screw to the back of the set first, so the set & brackets can be easily handled for hanging on the stand and centered before tightening two screws at the bottom of the brackets to keep the set from sliding side to side or lifting off the base while moving. The only small issue that I (almost) had was with the stick on rubber feet for the glass base. When removing them from the backing paper they come on, you must be very careful or the paper thin adhesive will remain on the paper backer instead of on the rubber foot. As I said in the beginning, take your time. You've been warned. So, in conclusion, this is a very nice, sturdy stand, and the pivoting feature (40 degrees each way from center) make hooking up connections and viewing from any angle very easy. Frankly, it would be nice if tv manufacturers would include a stand like this with their sets, instead of the artsy-fartsy stylized messes that they do supply that may or may not fit where you want to place your set (one of my issues). Update: 12/30/2021 I like the first one of these stands so well that I bought a second one for a new tv that I just purchased also. Never even bothered installing the oem stands as the set and stand arrived within a couple hours of each other.

I order this item with hesitation since I couldn’t find the legs for my TV. Also because assembling is not my things and somehow I always end up messing it up. I am 100% happy I researched the measurements before buying and that it actually worked with my TV. Assembly was very easy to follow and it did not even take 10 minutes to do so. I also ordered extra screws just in case but this product comes with everything you need in different sizes to accommodate your TV needs. Even the tools so its was the best purchase I’ve made in a while. Also love that it hides the cable behind so it’s not showing! It is up, it is sturdy and it’s holding my not so good assembly skills. Get it!

I had no idea these things existed until after I ordered a TV for my living room. I spent a lot of time searching for a TV that would fit my stand because I didn’t want to buy a new stand after getting my larger TV. I had to move my smaller one somewhere else, but I didn’t have a place to put it. I did some research and found this item, and now my 43-inch TV fits perfectly on the stand. It was actually very easy to put together. The quality is great, and I love it. I wish I had known about this sooner because I probably would have bought a different TV for my living room. This is definitely worth it. It’s the best thing I’ve ever bought. I seriously would have ended up buying a new TV stand, but they saved me probably a few hundred dollars. I’m grateful for it because I didn’t want to do an installation in the wall for that amount. The design is great, and it’s extremely sturdy. I love it.

I ordered this because the feet were way too wide for my table. This solved that issue. The setup was relatively simple. They give you plenty of screws to work with in case one size doesn’t fit for your TV. The base is glass so it gives it more of a premium feel, but it is a fingerprint magnet. Mounting the TV was simple, and had plenty of adjustability for height. The TV doesn’t move at all once you install the bottom screw mount. It is very stable. The only downside is that the mounting brackets stick out the bottom a little depending on your TV size. My TV is a 45”. It also has 2 cable clips to help tidy the cables. Highly recommend if you need a center mount if your TV legs are too wide or you don’t trust TV legs.

Decent stand. Looks good, much better than the little feet that came with my tv. Easy to install, the instructions are only 6 steps. If you follow them carefully and take your time, it takes about 30mins. If you’ve put one of these together before, it can go much quicker. My TV table is low, slightly lower than the seat of my couch. So I got this to lift my tv up. It is a much more pleasurable viewing experience. Not only is my TV about 10” higher, but it also now can sit closer to the front of that table. It’s almost like my TV got bigger. The stand seems durable, the hardware isn’t cheap (I didn’t strip any screws using an electric screwdriver). Though most of it you’ll use the Allen key to screw in anyway. When it comes to installing the horizontal bracket (what clicks into the 2 mounts on the back of your TV), it’s 4 screws, washers and bolts. REALLY spend the time to tighten those bolts. The screws will turn with them if you don’t hold the Allen key in one side while turning the wrench (or vice versa). I noticed as I was putting the stand on my TV that they were not as tight as they initially felt). But so far, solid and no complaints.

Great product, fits TV perfectly. Great quality. Fast delivery. Very happy with purchase

I honestly am so impressed with this little TV Stand. I truly would give it MORE than 5 Stars if I could! I needed to replace the factory tv stand that originally came with my Samsung TV. I was looking online for something that would work, and this was one of the more affordable options. It is SO good!!! It was quick and easy to install. They included a variety of screws in the package, so most TVs should find something that fits. The setup is pretty much adjustable to any size, so it fits my TV perfectly. It’s strong and durable. It feels well made and solid. It looks fantastic. I’m so glad I ordered this. Fantastic, amazing TV stand! And for a decent price too!!

Der TV Standfuß wurde gut verpackt geliefert. Aufgefallen ist das Gewicht, die untere Platte hat ein positives wertiges Eigengewicht was ja wichtig ist um große TV als Standfuß sicher zu tragen und nicht umzukippen. Diesen Punkt erfüllt er tadellos, nichts auszusetzen. Der zusammenbau ist auch Recht schnell erledigt, Anleitung könnte etwas besser sein, kommt aber klar. Die Montage , Verschraubung am TV ist ebenfalls recht unproblematisch und schnell erledigt. Das Teil erfüllt seinen Zweck und das zu einem fairen Preis. Qualität passt für mich absolut, ebfalls de Preis für den Standfuß. Kann auch nach einiger Nutzung keine negativen Punkte für den Standfuß mitteilen. Bin zufrieden. Kann ich gerne empfehlen. Bin zufrieden mit dem Kauf.

ممتاز

The material was very good, and all the necessary items, such as screws and bolts, were included in the package.