REXBETI Double Headed Sheet Metal Nibbler, Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting (Gold)

This little critter does a good job as described. Seems simple and pretty well built. I used it on 16 ga. steel electrical panels and it cut very well. The cuts were clean with no burrs. It is a bit messy, sending chips about the workbench. A couple of notes; Use oil on the cutting ends. Just a drop or two, but it will cut better and last longer. Practice your cuts on some scrap metal. It's tricky to freehand your cuts and the line you drew is covered by the cutting head. Good product for the price and the right tool for the job

Cuts great with aluminum on my custom guitar builds. Easy to use and well worth the price.

I tested the device on a few different materials and was impressed at how well it worked. I had to turn my cordless drill in the highest setting for the best cutting conditions. I am an rc airplanes kit and scratch builder. I mainly bought this to help cut out plastic cowls and to weight reduce ply and balsa parts but cutting out crazy geometry on the center of the parts. So far I like it and think it cuts great. I had the best results by clamping the handle of the nibbler in my table vise and clamping the trigger of the drill so I could use both hands to guide the piece I was cutting. Only thing I was disappointed is about an 1/8" is about the thickest material you can cut. However maybe they make different sizes and the one I choose that's just it's max it can cut. Overall I like it and can't wait to use it on my projects!

Great at cutting circles and even cutting straight lines. Over ridges or custom trim work works perfect.

I have been doing architectural sheet metal for plus 25 years this tool is amazing it works great gives you everything you need durabilities awesome the quality is great functionality great for corrugated panels pro panels pretty much anything great for circles easy to hook up to an impact drill and works for different sizes and gauges I love it

a part you need to make up your own mind.. so far it’s working.

Not bad for my first try! We had a carport installed next to our detached garage, which has a side door that opens toward the carport. I could have gone with a foot taller carport, not knowing exactly how far the roof curved down on the side and sure enough, the door was hitting the carport roof. I had to do some cutting to be able to use the door. I ordered the nibbler attachment and it works. It definitely needs the higher RPM's and my drill maxes out at 1500, the minimum. My efforts to keep it straight were freshman at best, but it did the job and from a distance, it looks fantastic. Up close it is not real pretty, but it is something that takes some time to learn and be good I think. As someone else mentioned, it will rain these little half moon shaped niblets all over the place so wear eye protection and if you can, spread something on the ground so the shavings are easier to gather. I used a magnet wand I built to pick up all the residue. I think this was money well spent. I don't have to cut sheet metal very often, and I know what I'm using if I have to again!

First, I was very impressed by the packaging. It came in a nice storage case with all the attachments. I did not have a drill that would run at the suggested RPM, mine were all slower. This may have had an affect on the performance. I bought this for cutting the new panels on a steel roof. When I was cutting the flat or near flat, it cut fine. When I had to go up or down it tended to not cut so fine. I ended up cutting some of the areas with a reciprocal saw (not as good a cut). A friend brought over a metal cutting blade for a circular saw and although it was a lot noisier, it was a lot faster and no toenail clipping to worry about. The clippings are a hazard for people and pets and they can get tracked into the house and damage floors. I also used the circle cutting guide. It worked well on the flats and not so well going up and down the ribs. I now know the limitations and will not hesitate to use it for the right application. Overall, I think it was a good investment

Works as intended, cuts are clean, bits last, good quality for price paid at time of purchase. Down fall is you will need both hands for operating tool and work needs to be secured. Works great though for what it was intended.

Kit muy completo para mis necesidades.

Bought this product because of Chris Fix. Cutting through metal without sparks is a breeze.

Excelente producto, hay dispositivos similares a la mitad de precio que este, pero si requieres trabajos precisos y sin contratiempos, esto es lo ideal.

Lo que no me gusto es que por alguna razón dejo de cortar.