GlazeGuard Gloss Floor Sealer Wall Sealer for Ceramic, Porcelain, Stone Tile Surfaces (2 Part Kit A+B Combined = 1 Gal)

This sealer is awesome!!! Made my new tile look even more beautiful!! Goes on milky then dries clear looks perfect… I used 4 inch roller. Easier to get into the grout lines. I highly recommend this product!! if you have leftover do not pour it back in the bottle and seal it! it started to expand luckily I noticed….!!!

Let me start by saying, we absolutely love the way this product looks- it seems to be very durable and gives that nice "wet" look- like others, when we have had friends over, they asked if the tile was safe to walk on! We were a little concerned with how slippery the finish would be underfoot, but it is absolutely not a concern. Easy to clean, and made the grout look like the company said it should from the start (It lightened up several shades after it initially dried). Makes cleaning the grout a snap as well- much, much better than a standalone grout sealer when I've used in the past. There is a learning curve for application- you'll need to plan out your time carefully, especially if it's getting applied in an area like a kitchen and main room like we did, as it takes 12 hours+ to cure. That time is absolutely impacted by temperature, so if you have your furnace set to go down lower than that in the winter overnight, you could wake up to the floors still being tacky in the morning like we did. Fortunately it wasn't a bit deal and walking on it didn't leave permanent marks. Make sure you have really good lighting when you apply it- which can be a challenge at night if you're trying to do it before bed- our initial pass had a few spots that we missed- and be meticulous about things like dog hair- we vaccumed and mopped, but still have a few floaters that wound up here and there- we're the only ones that notice, but still. If you do have spots you missed, be sure to sand the whole tile when you are re-applying- turns out far better. We tried the 400 grit at first that the seller recommended when I called him, but it didn't make much of a dent. Did some reading on their website and saw that 150 grit would work as well, and found that to be a much faster and better solution- makes it look hazy obviously, but when you apply the new coat it shines right back up. We'd absolutely do it again- really, really good product. Hopefully it holds up for years to come.

Great product. Made grout and tile look like new. Very easy to use and cleanup was a cinch. Takes more than stated 12 hrs to dry but otherwise great product

I normally dont write reviews but I have used so many sealers/protectants over the years that have simply just failed that I had to write about this product. This product is the real deal. I have used two part epoxies, many different sealers and protectants, varnishes......all claiming that if you apply their product to a white surface that it will not yellow over time at all. In every case that has been false and some yellowing has occurred. We put this product over some tile we painted white in a very high traffic area in 2019 and it is still holding up without any issues. We steam mop it regularly and still no issues. It has no yellow'ed AT ALL - which is amazing cause this is the first product Ive used in this way that actually didn't screw up a white finish. Plus, we only put on ONE coat. I have nothing but nice things to say about this product. Im going to be using this product again for another project coming up I have regarding the use of white paint.

Used this “stuff” on quartzite stone and now I have a big mess. some of the tiles have “stripes” although the tile was cleaned and the stuff was applied correctly. It looks like I will have to sand or replace the tiles. So much for a beautiful tile job.

We had faience tiles on our fireplace. Faience is similar to ceramic tile and is usually brightly glazed. Prior owners had painted over the tiles. We wanted to restore it. After removing the paint, it was clear that the original tile had lost its glaze. Our tile had no shine and looked sad. I googled a ton of solutions and landed on this one CoverTec. Our fireplace looks great now, with a perfect amount of shine. This looks like new tiles. I was worried it would be too shiny, but with one coat, it was just perfect. We had a great experience with the ordering and the application. We did order a sample first to check it out. The availability of the sample size is a great thing. Well done to the people behind this product!

This stuff is amazing, I have waited to write a review because I wanted to see how it holds up. It has been about 2 years since I applied this coating to my tile floor in my main hallway and bathroom and it looks as good as it did the day I applied the coating. I have had a new washer and dryer brought in using a dolly and furniture has been dragged across this floor multiple times. I also have 3 large dogs around 50 pounds each and this is a main hallway between all the bedrooms and it has held up amazing. There isn't a single scratch on this coating from any of the abuse that it has endured. The only thing I have to say about applying this is to make sure the surface is spotless before applying it and do not let anyone near it for several hours after it has been applied. If anything falls on this coating prior to the curing process being complete like a hair or anything, it will be there permanently unless you want to sand it out and re-apply the coating to that area. This is not a fault of the product obviously. There is hardly any smell from this coating while applying it either so fumes do not seem to be an issue and any tools used during the application are easily cleaned up with warm soapy water. This stuff is absolutely amazing and I would recommend this to anyone that wants to apply a protectant water proof barrier to any of the compatible surfaces.

I bought this with little faith that it would hold up to the foot and pet traffic as this was for the kitchen and dining area and we are NOT gentle with our flooring. We have ceramic tile and had tried the Behr wet look coating before. Yeah, that didn’t hold up well at all. One pet accident and it was over. So I didn’t have high expectations for this product. I applied it to the dinning room only to save myself the trouble of having to take it all up if it sucked. Well, let me tell you what. This stuff WORKS. My tile now have that beautiful wet look to it permanently. It was extremely anxiety inducing stepping on it after the recommend drying time cause it looked wet. (Yes I know that the whole purpose but still..) Then I was afraid to Moo it or use the bissel wet vac cause it’s a little streaky on tile flooring but it got to the point where I had to. And yes the Bissell was a little streaky but I suppose our socks polished off those streaks and it’s back to its glorious shine. Only thing my grout was a light brown, sandy colored and after the application it looks a little orange-y. My husband says I’m nuts, that it just looks darker brown but I know for a fact women can pick up more color nuances than men so there is definitely an orange hue there, to my eyes at least. It’s not a deal breaker, still looks geat . Now I’m actually going to do the entire house. I suggest you get knee pads because my knees were not happy the best day.