Kalolary Drip Irrigation Kit, 164 Ft Adjustable Garden Watering System with Timer, 133 PCS Blank Distribution Watering Drip Tubing Kits for Patio Lawn Garden Greenhouse Flower Bed

Great price and quality

The threads on the controls are not standard and you will need to use the one adapter they supply to connect the included y pipe. The flow through the valve and hoses is so low you can only run about 1/8 of the sprayers included as they are designed. Lots of plastic over molding on the barbs needs to be trimmed or else it breaks off and clogs the nozzles. The inlet to the controls is close to 3/4" hose connection threads but is different enough it leaks. Because there is only an adapter to connect to a bare pipe in the box my only option was to wrap my hose threads in the included tape and use pipe wrenches to tighten it together until it drips constantly. So now to use the system I have to turn on the hose to it and then turn it off when it's done or else it leaks. Makes the control pretty pointless.Also the included tool does not help in this kit, I can only assume it's for another set they sell. All around a bad product, but I guess I get what I pay for. I plan to go out an buy a good set of everything from my local hardware store like I should have initiatally and return this soggy mess in a wet cardboard box for a full refund. Just wish I could get back the day I spent trying to get it to work.

Everything you need to start perfect kit thank you

I purchased this system to replace another system that I installed some time back. The first issue I had was the inability to tighten the system down on my standard outside facet. The system spins on for about three turns then binds, unable to seat the facet on the washer. Took a pair of pliers and still could not get it seated water continued to poor out the connection. I had to remove my Y valve from the facet and install there cheap y valve to be able to get a good seal on the facet, even with that I had to crank down on it to the point I thought it would snap. Now instead of having my heavy duty brass Y I have this flimsy plastic Y installed. After getting everything installed and stopped the water leaks I programmed the unit. The digital valve would not shut. Figured out that you have to program it to turn on then shut off, then reprogram it to the times you wanted. I have noticed that during the set up of the system, flow tends to be an issue. I get all nozzles set with good flow, secure it and restart it, and have to re-adjust the nozzles over again. My old system had drip nozzles, this has adjustable nozzles. The seller was quick to get back to me about the issues and would like some pictures, that’s impossible they need to do a better job in QA on the thread pitch. The digital panel seams to work well but time will tell.

I had to return this. I followed the instructions, cut things correctly, and set up everything the way they told me to. Then I turned on the water, and nothing happened. Which, I would like to say, is baffling as I'm not sure how water can't make it through a single tube like this setup. However, the water just would not flow through the tube system and stopped at the first joint completely. I tried to redo it several times, but there was still absolutely nothing. I would not recommend you waste your time or money on this, as that's all it'll end up being: a waste of time and money, with added frustrations.

Wish the hoses were thicker and longer. My garden seemed super wet in some places and others the sprinklers seems to not have enough spray to them. The hoses would pop off all the time.

While this kit technically does work, it is absolute garbage.The timer is cheap cheap, slightly leaks on occasion and the lcd is almost unreadable in any lighting conditions due to the fact you can see every number and background icons faintly in the background making it look like a jumbled mess.The fittings are cheap, the sprayers are cheap, the on/off valves split in two when you try to use them in line causing them to spray all over the place.The fitting on the timer is proprietary and wont accept standard hose thread, I think its npt threading.Pretty sure the hose isnt uv resistant.Something I didnt know is running 1/4” line all the way from the timer means you cant install any more than 6 spray nozzles, and even fewer if you add in the vortex emitters.I missed the return window.I just ordered two of the 1/2” carpathen kits and I love them. The sprayers work, they have pressure and I bought an eden timer that also functions about 1 million times better.Save your money and just do it right the first time.

The TIMER WILL NOT FIT on US threaded faucets. It also LEAKS a lot. I bought two kits - one from Karolary and a used one form Amazon. I did not open one of the kits (after the return window expired) only ot discover that the timer will not fit on the faucet and it also leaks. Since the timer does not work, it would be nice if Amazon would take back the unopened box.