- Worx WA4036 13.5 oz Soap Dispenser Attachment Bottle for Hydroshot Portable Power Cleaners

Worked like a charm. Put some deck and patio bleach (concentrate) in it and power washed everything! Looked almost brand new when I was done.

If you're just doing a quick wash and don't want to break out the power washer for optimal suds, this will do a fair job. Will still need a sponge/washmitt scrub for tougher dirt/road salt.

Bought this to fit on my Worx Hydoshot. A little tricky to get on at first, but once I figured it out it was easy. I use it for washing my car and it suds it up really well. Once it is suds up you have to take it off and put on your other nozzle.

Great addition to a useful product. I don't have a hose during the colder months so this works great for soaping up the car.

good

This is a must have if you have the Worx Powershot. I bought the Powershot specifically to clean my cars. You do NOT need foaming soap. I used regular turtle wax brand car wash soap. This dispenser somehow makes it foamy when it shoots out. And it doesnt seem to use up the soap quickly.

Does not fit WORX power washer.

Does not seem to like the “heavier” kinds of soaps without adding this attachment to the end of the long extension so it has high pressure go thru it. It does a decent sputtering of soap foam out onto the vehicle/thing you are cleaning. With my heavier soap it does not foam as well as a full on soap lance but it also was alot cheaper and quick to use instead of swapping other equipment around.

Awesome product ,fits seamlessly into power washer ,wished I had purchased months ago

It does the job as it says

Received in good condition. Noticed there is a missing rubber seal beween the plastic bottle and the nozzle, liquid is leaking when place in a slanting position.

Voldoet volledig aan de omschrijving en verwachting. Past perfect en niettegenstaande de lagere druk ten opzichte van een echte hogedrukreiniger valt er best nog redelijk wat schuim te krijgen in combinatie met de Worx.

* SOAP DISPENSER, NOT A SOAP/FOAM CANNON * Even though they are similar in form and function, the WA4036 is a soap DISPENSER, not to be confused with a soap/foam cannon. The performance between the WA4036 and a true soap/foam cannon will simply not be the same. * HIGH PRESSURE LANCE RE-DESIGN * Apparently Worx redesigned the Hydroshot high pressure lance and removed the proprietary twist quick connect in favor of a brass quick connect style fitting. The WA4036's nipple has two thick diametrically opposed tabs that makes it incompatible with brass quick connect style fittings and so it must be directly inserted into the Hydroshot. * REVIEW * If you don't need soap/foam cannon performance or an adjustable mix ratio, the WA4036 will enable you to easily add and apply liquid detergents, de-greasers (etc) using the Hydroshot. The WA4036's container, made of thick hard plastic, has four thick embossed lines of graduate measurement marks at every 100ml with only the 200ml and 400ml levels indicated. These markings are not coloured and so can be a little difficult to see. Given the lack of an adjustable mix ratio dial and limited volume markings, the WA4036 is not a precision applicator. But then, it isn't meant to be, so this does not diminish its purpose or performance. Note that the WA4036 does not have a washer to seal the container to the sprayer body so some leakage may occur under certain circumstances. If you wish to add a washer or O-ring of some type, the opening of the neck of the container has an inner diameter is about 17mm, the outer diameter is about 21-22mm. (Minor irregularities due to the plastic moulding process made it a little difficult to get a consistent measurement with digital calipers.) The WA4036's clear vinyl suction tube, while flexible, is not really flexible enough nor weighted to allow the WA4036 to draw liquid at more extreme angles off of horizontal, especially when you begin to run low on liquid. The outside diameter of the suction tube nipple is 8mm, so if your needs include being able to apply a mixture at high/low angles off horizontal, an easy modification would be to replace the existing suction tube with a more flexible, end weighted suction tube to allow the WA4036 to draw liquid at more extreme angles. * CONCLUSION * I've found that the WA4036 does exactly what it's supposed to and does it well enough for light duty and spot cleaning tasks. I recently used it to dispense car wash soap, and while I didn't have (nor expect) foam cannon performance, the WA4036 adequately and quickly covered my entire vehicle in soap. If you don't need soap/foam cannon performance, adjustable mix ratios, or have to dispense over a large area, the WA4036 works just fine for general liquid chemical mixing/dispensing tasks and extends the capabilities of the Hydroshot. (Review will be updated if any other issues arise.)