Nilight - ZH006 LED Light Bar 20 Inch 126W Spot Flood Combo Led Off Road Lights with 16AWG Wiring Harness Kit-One Lead, 2 Years Warranty

So far love the brightness, quality, and ease of install. I bought 2 lights kits to install on my utility tractor for winter snow removal front and rear visibility. I bought the light kit that included the wiring harness as it was the most cost effective and I was running both separately. Product notes say you can connect 2 lights to one harness, which is true, but those would have to be installed within 3 feet, which was not my case. So 2 lights can run on one harness, but know they need to be installed close to each other. I cut off the extra connectors and sealed to waterproof the wires. I bought a mount kit for the front. I needed to add longer screws to clamp to my front guard . I did not want to drill through the front steel guard at this time. May do that in future. The rear was mounted on the rollover frame and the holes I used were already factory made, so that was easy. The mounts on the light are adjustable and slide the full length of the light body. I ran the wire down the outside and secured with special outdoor zipties. The switches included on the harness are waterproof and light up when on, which is great addition! Once I drilled a hole in the plastic dash the switches snapped into the opening securely. Use a tapered bit as you can test the hole size as you go!! The switch had a quick connector so once that just fit through the hole I know the switch would lock in securely. Install was easy and has inline fuse built into the harness. All parts needed to connect are included, even extra fuses and connectors. I used heat shrink to seal all connections since they would be exposed to water and snow. Also, since I mounted the light upside down, I seals with caulk the area where the wire enters the light body, just to be sure. I recommend these to add a bright light to any application!

This thing is awesome super easy set up. We put it on John deer tractor to do snow removal. Super bright almost too bright! Well worth the price!

Just as described bought it for my nephew to put on his truck and is amazing and bright! Very easy install a 16 year old did it himself! Photo attached is just the light bar on in the field!

Very bright, easy set up and easy mounting.

I bought this light for the front of my 2001 EZGO TXT golf cart for two reasons. 1. To see better on the occasional off road excursion. 2. People in my neighborhood don't like to turn off their brights when approaching anything that can't blind them in return. Lol Positives: The light seems well built. It is extremely bright. It has very broad coverage. The cords were long and heavy. It was relatively easy to install. Negatives: The switch connector could be better in terms of mounting. You have to cut the precise hole size and the add a notch on the side for it to slide in. It is held in place by the plastic being squeezed into the hole. It really should have a backing nut that tightens on. The mounting bolts that came with mine were not stainless steel. Since it will obviously be mounted in the weather, they should be ss. Finally, I had to add shims to get mine aimed level. This has more to do with where I mounted mine; however, I have used other lights in other applications that would have worked without any shims. As I said in the title, I'd buy it again, but it would take only 2 out of 3 "fixes" to elevate it to 5 stars.

I purchased 2 of these 20" light bars for my John Deere 2305 tractor, one with the wiring harness, and one without. I mounted them on the top of the roll bar, so that the loader bucket and rear implements would not block the light. During the winter months, most of my snow removal has to be done after dark, so these will be a great help and improvement over the stock lights. The battery connection wire on the provided harness was too short, so I made a longer one from 16ga, and ran it from the battery up underneath the driver seat, where I connected it to the provided harness with crimp connectors and shrink tape(had to cut off the stock battery ring connectors). From there, the provided harness worked great. I mounted the relay underneath the back fender where there were a lot of other factory wires sitting. The switch wire was plenty long to reach up to the dash, and I happened to have a blank spot in the dash that was perfect to mount the switch. I made a wooden bracket so that I could mount the lights back to back on top of the roll bar, one facing forward, and the other backward. The block is mounted with 5/16" carriage bolts through the factory drilled holes in the top of the roll bar. I covered the harness and wiring through the engine compartment with plastic wire protector tubing, and secured it all with zip ties. I am very happy with the brightness, and the adjustable mounting brackets are great for lining everything up. Build quality seems very good and solid. Hopefully these lights can survive the freezing -40F cold and wet job of blowing snow this winter!

Great light bar, super easy to install and wire up! Super bright as well.

Got it today 08/15/25 and is hooked up and works great, the brackets are a little tricky and the wiring harness could be a little bit longer for the switch but so far it's bright and seems good although one huge con is that it creates a very loud teapot like squeal that's very annoying, will try to adjust positions and see if it goes away

Excelente producto, llego antes de la fecha. Ilumina súper lo instale en una burrera y lo mejor que viene con el kit de instalación.

ممتااز جدا ركبته بنفسي جدا سهل التركيب ثبته على الدعاميه نيسان ارمادا وسافرت فيه 2400 كيلو متر ممتاازه الإضاءة تغنيك عن ليت السيارة 👌🏻

Great product and easy to install. Would be nice if there was prions for mounting. Excellent clear light for night riding.

Buena luminosidad

nice and bright!