EEMB Lithium Polymer Battery 3.7V 1800mAh 103450 Lipo Rechargeable Battery Pack with 2 Wires JST 2.0mm Connector for Speaker and Wireless Device- Confirm Device & Connector Polarity Before Purchase

The battery works fine and the polarity is correct, as it seems some others have noted a polarity problem. The plug on this size battery does not appear to be standardized so my light would not accept it. So I had to cut the leads on the old plug and solder them to the new battery. It then works and fits fine. To be fair, it has a big warning on the description to check the shape and size of the plug you want. But I could not find another battery with a proper connector. So, if you don't do much soldering, be sure the plug will fit your project.

Used to replace the swollen battery in my headlamp. It was the right voltage and current but the positive and negative were reversed in the plug. They were easily changed to the correct positions and then it plugged right in and works great.

The EEMB battery came in perfect condition, looked very fresh and well made, it took a charge perfectly, I used a lab bench linear powersupply, set it to, 4.2 volts, limited it to 1 Amp of current and progressively over the course of charging the onboard protection module slowly tapered off the current as it should, it came with a 3.6 voltage charge and I topped it off to 4.2 volts, it worked perfectly. I'm using it to power a Retekess Pr-15 pocket radio, I do wish I ordered the 1000 mah version since it would've been smaller, but it's fine, ill be cutting out the battery compartment and fit the lipo battery inside, the chip inside there can handle 4.5 volts, so it should be fine. After I spray out the volume control, headphone jack and volume/power switch with deoxit d5 contact cleaner and lube, I'll also be recapping the radio "there are only two Electrolytic's inside, but they're junk, so they'll be replaced with Panasonic KS-A series ECE-A1AKS221 and ECE-A1AKS101 they'll be ordered from mouser electronics as you really can't trust ebay or amazon for good quality official parts like that, perhaps I'll also put a Visaton K 50 FL - 16 ohm 2" mylar 1w rms speaker also available at mouser inside there too. Looking at the frequency response which was very nice and generally having good experience with visatons woofers and subwoofers, tweeters and other full rage speakers in the past, I could only imagine how clear it would be. Would just have to expand the speaker hole. To charge this lilo from 5v USB power, I picked these up 10Gtek# 1A 5V 18650 Lithium Battery Type-c USB TP4056, Charging Board with Protection Charger Module, Pack of 3 https://www.amazon.com/dp/B09KRK4MJR?ref=ppx_yo2ov_dt_b_product_details&th=1 just clip off the crappy jst connector and solder the batteries wires where they have to go and you're good.

I bought this to replace a battery in an Ecoxgear speaker. They don't sell the battery anymore for this speaker so I pulled the battery out and found this one. I had to switch the black and red wires at the connector but it seems to work great. It takes a charge and seems to last for a decent period of time.

Worked perfectly.

This battery is the same size but wrong plug for the Minn kota Ultrex.... This will not work in the remote...

I've had no issues with the battery, works as intended. Check the battery polarity on your board though. If you are getting this for the RAK meshtastic, you will need to reverse the wires.

Exactly as pictured, great price

監視カメラの電源として利用しています。 充放電コントロールモジュールを使って、日中は太陽光パネルで充電し、その電力で監視カメラを動かしています。小型でかつ十分な容量があるため、この電池自体を充電することもなく、連続して運用できています。４箇所のハンダ付けとケースに格納するだけの簡単な作業で作成できたため、非常に満足しています。 欲を言えば、取り付けられているターミナルコネクタと対になるコネクタが付属していればと思います。

The product was packaged very well, but the battery only charges to about 80% (4.0V instead of 4.2V). I discharged it fully (about 3.5V as the BMS/safety mechanism kicks in) and then recharged it, but I still can't get above 4.0V. I can't return it because I had to solder a different connector before I could use it. I left 2 stars instead of 1 because the battery safety mechanism seems to work and because packaging was decent.

Gutes Produkt

Et hop, l'aspirateur fonctionne à nouveau

If I need more, I'll order here again