Dorman 926-274 Radiator Mount Bushing Compatible with Select Infiniti / Nissan Models, 2 Pack

These fit perfectly on my 2002 Nissan Sentra GXE.

⁃ These bushings fit my 2004 Nissan Sentra 1.8S perfectly. ⁃ They are easy to install. On a scale of 1-10 where 1 is easiest and 10 is most difficult, I would rate their installation a 2 or 3. ⁃ The old bushings were worn out, had frayed and/or cracked and were not holding the radiator firmly, causing the radiator to shake more than usual. ⁃ The (old) bushings are held by a metal bracket. To get to the bushings, you use a 10mm socket and get the 2 bolts that hold the bracket together. For the bracket on the passenger side, you don't have to completely remove it. You just need to remove the 2 screws and lift the bracket just enough to pry off the old bushing. ⁃ To install the new bushing in the cavity or 'hole' of the bracket, I pinched the bushing slightly to an elongated/oblong shape for easier installation. ⁃ Once the bushing was in and the bushing grooves were slid into the bracket grooves, then I aligned the bushing opening to the radiator top bushing holder. Once aligned and the radiator supported by the bushing, I tightened the two 10 mm bolts. I had cleaned the bolts with spirit/acetone before installation to remove a bit of rust and then applied a dab of anti-seize on the bolts before tightening them. It was a bit of overkill but I felt that it was important to clean the bolts. ⁃ The driver's side is the same for removal and installation as the passenger side. The bracket actually comes out completely. ⁃ The radiator now is more firmly secured by the bushings and the bushings look and feel like they are of good quality.

Perfect if on a 2005 Nissin Sentra. Took 10 min to change out both of them. You tube has a great video on how to do the change out.

As advertised

Fits perfectly into the bracket. easy install. cheap price was not even a factor. note-Had to break the old ones into pieces to get them out because they were extremely hard from heat and age.

Excelente

Fits a 2006 Nissan Sentra 1.8, with no issues, and was the easiest thing to replace, four 10mm bolts took about 2 minutes literally.

The fit tightened up my radiator and was easy and quick to install. I would buy these again.

Nissan quest 2007 funciona al 100

Good fit. Seems like quality part

Ideal para el Sentra 2001

As shown

Great quality exactly what you would expect