Question 1

What's the difference between the executioner fly swat wasp bug mosquito swatter zapper & the executioner pro, aside from $10 & those 3 letterr (pro)?

Accepted Answer

The pro uses C style batters, the non-pro uses AA. This does NOT mean one is more powerful than the other. They are both 1.5V per battery which is either used to increase to 3V, or 1.5V.

The actual difference is the PRO is advertised to be slightly larger and thicker. almost 2 inches thick instead of 1 inch, and 23 inches instead of 20. The exact measurements are Item Dimensions: PRO: 22.83 x 9.45 x 1.97 in && NON: 20 x 7 x 1 in

So, 3 extra inches wide, 2.45 extra inches long, 1 inch extra thick. The C batteries are used because they have a higher mAh rating ( Milli-Amp Hour ) than AA batteries which simply means how much energy the batteries can hold. IE, AA may hold 1000 mAh of energy, and C may hold 3000. This doesn't mean it is more powerful, it simply means you go longer between battery changes. The exact mAh rating is likely much different than I listed - I used 1000 and 3000 as an example. Basically, it means if the unit uses 100 mAh of energy ( 100 milli-amps per hour ) then you have approx 10 hours continuous use while the 3000 mAh would last 30 hours. The mAh rating applied to a battery means how much energy it can expend for 1 continuous hour of use. 1000 mAh battery means 1 mAh draw can run for 1000 hours, 10 mAh draw can run for 100 hours, 100 mAh draw can run for 10 hours and 1000 mAh draw can run for 1 hour, 2000 mAh draw will last 30 minutes if the battery can support it ( I'm unclear on the aspect of going over ).

Now, the internals of the PRO may be different - however NOTHING on the item page indicates that this is true. If the internal are different then it is possible to have a larger spark if larger caps are used to store the charge... The internals would NOT need to be changed to support C batteries vs AA batteries vs AAA batteries vs D batteries other than the dimensions and the battery cradle. They all give 1.5V each, and can be combined in series ( + to - ) to add the voltage together. 2 batteries together == 3V. 4 batteries == 6V. 8 batteries == 12V. Batteries can be added in parallel ( + to +, - to - ) to increase mAh ( which allows longer intervals between needing to change the batteries ) so some equipment may use 4x AA batteries to increase to 3V by hooking 2 in series, and then 1x in parallel for each tier to increase mAh rating to 3V and 2000 mAh rating ( if we use the previous 1000 mAh rating ). They may also keep it at 1.5V and just increase to 4000 mAh rating ( if we're still using the 1000 example ). I may be mistaken in this example as well - I can't recall whether hooking a battery in series ( + to - which increases voltage by adding the 2x together so 1.5 + 1.5 = 3v ) will also add the mAh rating or not. If it does then it becomes 2000 mAh... It may...

I just wanted to clarify because some people are claiming C batteries cause a larger spark, which is FALSE. The internals charge capacitors in these units which, when a connection is made between a positive and negative wire ( the metal bars are alternated between + and - ) by a creature shorting the connection, the capacitors release the energy incredibly fast which causes a pop because of a loose connection ( If you flip a wall switch on very slowly, you will likely hear a spark or pop. It's the same concept. The metal isn't making a connection and starts as it gets very close, the electricity bridging the gap makes the spark. ).. The pop is because more voltage is being passed through the creatures than their body can tolerate, increasing pressure and pop.

Question 2

How effective on crawling roaches, also known as palmetto bugs down here in the Deep South.  Is it possible to get the zapping surface at floor level?

Accepted Answer

If the bug can touch the wires, I have little doubt that it will kill them. However, there are a number of issues with zapping bugs on the floor (or any surface other than on the wires of the racket. First is the thickness of the racket head, being about .44" there will be a gap of about 0.2" to the floor so the critter needs to be at least that tall. Second is that you can't really get the racket head flat on the floor, the handle will not allow it. But what concerns me more is that you would buy a racket to kill the bugs on the floor when a shoe would do just as well. The whole point of the racket is to kill bugs that are flying as it is difficult to kill them in flight any other way.My suggestion is to use the shoe and nix the racket for crawling bugs.

Question 3

Hwhat is the power on it

Accepted Answer

I would not know how to calculate the instantaneous power (watts) in engineering terms, but the batteries use electronic circuitry to build up a pretty high voltage which is probably stored on a capacitor until some unlucky insect gets the dubious honor of discharging it. Needless to say, this swatter has "fried" any insect that encountered me when I had it in hand. All kidding aside, I would hate to have it zap me and it is probably strong enough to persuade an aggressive dog to keep its distance.

Question 4

Will this work on assassin (wheel or kissing) bugs, june bugs, or lantern flys?

Accepted Answer

The Executioner does not work well on Spotted Lanternflies.  I live in a highly infested area, where they were first discovered in the USA, and out of every ten that I hit with the Executioner, it might kill two or three. Another four or five drop to the ground stunned, allowing me to step on them.  The other one or two jump/fly away with little effect on them.  I wish this racquet would be twice as powerful as it is, but I don't know if there are any more powerful ones out there.

The Executioner Pro Fly Killer Mosquito Swatter Racket Wasp Bug Zapper Indoor Outdoor Over 55cm Long

Details

Description

Have a Question? See What Others Asked

Common Questions