World's Slimmest Phone Ring Holder, Attom Tech Tomorotec Ultra Thin Cell Phone Ring Stand for Magnetic Car Mount Hook Compatible for iPhone Samsung Smartphone Accessories (Silver-Grey)

I hate having a case on my phone or anything to bulk it up. I also hate those pop stick things, that is like a kickstand on the back of the phone. My primary reason for even trying this out, is that I have a note 10, and it was just barely too tall to reach the whole screen with one hand. Tried it out and loved it. It is super super thin, and I hardly notice it. As far as the stick, when I went to take it off, I seriously had to put effort into it. I ended up grabbing a knife to pry under it and peel it off. I only took it off, and I only gave 4 stars instead of 5, because the pop-out part becamse loose, and wouldnt stay in the locked position when I wasnt using it, and just swung around as I was holding it. I bought another one immediately though, because its cheap enough

Didn't work with my case from the get-go but that part's on me. I layered the two included adhesive tape circles so it could clear the ridges on my case. That worked for a while til the adhesive on the back of the swivel base itself came unstuck. The circle stickers held just fine, even layered up. 5 stars on the stickers, lol. I removed the stickers and what was left of the adhesive from the back of the and superglued the ring directly to the case. At least that way it stays on my phone. The folding ring doesn't stay closed after being opened and closed a few times and it flops and spins around freely as stated in other reviews. Subsequently, mine also broke clean off from being bent back while in my pocket, which I guess might have been prevented if I had treated the ring like it were made of porcelain. The magnetic part, which is little more than a metal sticker (less than 1mm thick), just came right off when I pulled my phone from my car vent mount after maybe a month's use. The magnet on that is barely strong enough to hold my iPhone SE (small smartphone) so there wasn't much force involved. All in all, could not have been a worse purchase. Durability and ergonomics were clearly not considered and the general design, while indeed slimmer, is all around lower quality than that of any similar product I've tried. I don't leave negative written reviews often, but in this case recommend that you keep looking.

I like how it's thin, I can put it in my pocket without feeling it. It opens up and can be used as a stand. I have no problem docking it to a phone magnet in my car. The idea is very awesome, but it is definitely not perfect or even close to it. Well, the it's very thin. So if you don't have finger nails it's going to be tough opening the ring. If you have the finger nails, then I hope it's yours are not brittle because it takes a little pull force to take it out of its locking mechanism. Once it's pulled out, the ring is very loose. It does not extend all the way out to 180 degrees. Nope, I'm not gonna get a protractor to measure but I'd say it's a little over 90 degrees, maybe about at 110 degree angle. I have a Samsung S8+ for size purpose, and when the stand is out, the phone looks like it's leaning closer to at 135 degree angle. I placed the ring in the middle of the back of the phone BTW. One trick you can do is rotate the ring and open it all the way out. This way, it will stand up higher. Also, I feel like it's going to break every time I open it all the way out. I've been careful with it, so I'm good at far. But damn, I don't have hope for this ring when it has to deal with me on one of my angry or drunken days. Do I think it's worth the price in comparison to what is out on the market? Yes. However, I wish a company would stand up and make the ring bearing sturdier for thin ring holders of this size. Charge it at 20 or 30 bucks, just as long as it's not as loose. I will pre order it. Buy this is you're gentle. If you're rough, then you'll soon be complaining how you wasted your money.

I haven't had this long. I really enjoyed it while it worked. But the length in which it worked as adverse to the cost doesn't make me feel warm and fuzzy. It is on a low profile case. It is suffering cohesion failure. (Still stuck to case and to metal but the inside gummy now stretches.) Application iphone xr and very lightweight leather minimalist case which I cut the leather through to the plastic for best potential of adhesion. Cleaned and I'd say it worked since it is still sticking to both sides. However, I believe the heat from charging the phone or perhaps the surface size of the 3m glue is insufficient to hold the weight of the application. I as well have not stressed it, however have had a corner break. I didn't mind that so much (my cat might've had a hand in that. He knocks my phone around) it did not create any scratching issues to fingers and still functioned. There is a warning about that and I am not taking any stars off for it. However, for approx 2 months of usage, this should come with a handful (6?) 3m adhesive replacement patches. It feels nice, rotates well, is thin. Tho I can't say it's added too much enhancement with handling the phone due to the larger ring (parhaps my fingers are too small) and certainly once the adhesive broke down. I will look for 3m dots before I would purchase again.

It loosened after a week or 2 of having it on my phone. It was also something I would flip back and forth wihout needing to so that could have been it. It alwqays closed and I never had a problem with feeling like it wqas going to fall off. I used it as a phone stand as well. It just finally fell off, but it seperated from the adhesive part & the actual full metal part, so the ring never broke, and it never became unstuck from my phone case (which is rubbery). For the price I would buy it again, and I probably will. It didn't last that long, and it's not perfect, but I like having something to grip on my phone. This is one that still allows me to put it in my phone holder in the car because it is so flat against my phone. All the others stick out too far (like pop-sockets & love-handles) and my phone doesn't fit into the drop holster with them on.

I’ve been using mine consistently through the day, every day, for well over a month and have no issues with defects. I can understand why it’s possible for this to break - it’s two pieces of thin metal held together by pin hinges. But if you recognize that it’s not meant for rugged use it will be fine. It’s perfect for what it was designed as: a slim, attractive finger support and kickstand for your phone. Also when you first take it out of the package be aware that it might be opened backwards. Mine was. The moment I hit some resistance when trying to open the ring out I CAREFULLY tried to open it the other way and the ring pulled back fully and smoothly. Not a defect - just popped the wrong way in packaging. I absolutely love this ring holder and would buy it again when the time comes. *Edit: 7 months later and it’s still working great! The ring still hold position as set. It hasn’t loosened up or gotten wobbly over time (no drooping against my hand or wiggling in its base). My phone is in my hand constantly and this ring is always in use. It’s saved me from dropping my phone countless times by now. The rotation feature is also still working perfectly making this ideal for switching between left and right hand use at will.

Bought this on June 28, 2026... Broke August 3rd, 2026... 1 week after I would have been able to return it... Built like a disaster, it felt flimsy from the start. The only redeeming quality of this item isn't even part of the item itself, it's the sticky they use to attach to your phone. That sucker sticks great! Other than that though, save your money. -3/10 Do not recommend.

Like this product the build quality is very nice for light use . It is not the most durable but it is durable if u use it for what it was meant to be used for . If you're looking for a light kickstand to use on your thin case this is what you want. Even though it cannot be bent all the way back it works like needed to give your phone an angle or use it as a ring I think your phone in your hand.and the reason I gave it a five-star rating is because it's very thin so therefore you don't even think that there is a a ring stand on the back of your phone and it will hold the phone up. So if you're looking for a really thin ring stand that's not going to get in the way for your real thin case I would buy this over and over and over and over again I love it just have to be a little gentle with it and realize it's not the most durable but at the same time it doesn't break very easily and it's not one of those that you can bend in any direction.

Es más pequeño de lo que esperaba, trae un sistema de agarre mediante cinta de doble cara, no esperes que se ajuste al aro magnética de tu iPhone o funda al efecto. En cuanto al funcionamiento, si tienes un poco de pericia podrás colocar tu smartphone casi en cualquier posición y con cierta estabilidad, eso sí con el aro completamente desplegado, en posiciones intermedias no tiene fuerza suficiente para aguantarse.

Muy delgado, permite ponerlo en una estación de acoplamiento. Cumple plenamente.

Me encantó porque es sumamente delgado que no hace bulto pero a la vez muy resistente

Sadece yüzük olarak kullanabilirsin, stand olarak kullanamazsın... Ve 1 ay kullanamadan bozuldu. Yüzük kısmı gövdeden çıktı. Berbat sakın almayın…iade sürem bittikten 1 gün sonra bozuldu.

Amazingly strong tape on the back and small enough of a diameter to fit into the magnet ring of my many MagSafe stands with hollow middles. The snap ring seemed tight at first to pop open, but it's designed not to open accidentally. It is so slim that it doesn't bind onto pockets on the back of my phone. A little pricey but worth it.