Hayward SP1091LX Dyna-Skim Above-Ground Pool Skimmer, Surface Skimmer for Pools

This skimmer was very easy to install, even if you’re not super experienced with pool equipment. Everything fit together well, and the instructions were straightforward. Once installed, it does a great job keeping the surface of the pool clean. It consistently pulls in leaves, bugs, and debris, making a noticeable difference in water quality and reducing how often I have to manually skim. Overall, it’s a simple, effective upgrade that works exactly as it should.

The Hayward SP1091LX Dyna-Skim is a total game-changer for keeping my above-ground pool clean! This skimmer is incredibly efficient, and the design is both sturdy and easy to use. It effortlessly removes debris like leaves, bugs, and dirt from the surface of the water, keeping the pool looking crystal clear. What I love most about this skimmer is the automatic operation. Once it's installed, it does all the work—no need to constantly fish out leaves or debris by hand. The Dyna-Skim’s surface skimming is so effective that I can actually see a difference in water clarity after just one use. The build quality is excellent—it's made of durable materials that stand up to the wear and tear of constant use in the pool. The installation process was quick and easy, and it fits perfectly with my existing pool setup. The large debris basket is also a great feature, as it holds plenty of material before needing to be emptied, making maintenance hassle-free. For anyone with an above-ground pool, the Hayward Dyna-Skim is a must-have. It’s a time-saver, and it keeps the pool in pristine condition with minimal effort. I highly recommend it to anyone looking for an easy-to-use, high-quality pool skimmer. It’s worth every penny!

Like most reviewer's, I bought this as aftermarket for a "cheapo" framed pool that didn't come with a skimmer basket from factory. Last summer I used a skimmer that clips on over the side of the pool but it was clumsy and when the pump went off things would float back out into the pool. My biggest struggle before ordering was understanding how it would attach to my pump system. No one had provided pictures or sizes, so that's something I've added. Installation was easy! Just be super careful about which direction the in-the-pool side bracket attaches to the basket part- the top and bottom take 3 screws and the sides take 2. Despite paying attention to that detail, I almost messed it up when marking holes. Eek!! I put my pump on an already filled pool. The rubber gasket they send is intended for you to cut a hole first and the gasket slides over (it's 2 sided and attached to itself around the inside of the ring) so I just cut it apart to give myself.2 independent gasket rings. I held the inside bracket to the liner, marker the spots for screws by poking hard enough with a pencil to make a pokey divet in the liner. The screws it comes with are flat tipped, so I got a pointed tip screw from the junk drawer and used it to make a pilot hole before backing it out and using the supplied screw. I was quick on that part each time because I was worried about the water pressure on the hole. I did the whole thing myself, standing outside the pool and using my body to push the basket against the pool while I screwed the pieces together with a handheld screw driver. Once fully attached, I connected my pump hose onto the bottom and then cut the liner out where the hole should be. No hiccups! Now, I thought I had a larger tube that connects from the pool to the pump, so I was sure I could screw it to the "big" hole on the bottom of the basket. My pool is a 16ft round, 4+ft deep. My tube was NOT that big, lol. As shown in picture, that nipple is 2.75" wide. There's an adapter that screws on internally and reduces the tube opening to 1.5". I panicked a second at first because my tube seemed *just* too small to fit over, but I removed the adapter from the basket and used the ground to help me push the tube over and it went! Snug fit, no leaks, no need for a clamp. Then just screwed the adapter back into the bottom. Turned the pump on and it worked beautifully! Tried out the vacuum attachment. The nipple on that is 1.25" and the set up was wonderful. So glad I decided to go this route! (P.S. I just used the caps provide with the pool when I bought it to plug up the original intake holes as they're of no use to me now. Haven't had any leaks or issues.)

This is an excellent product and highly recommended to replace the over-the-railing basket skimmer that comes with above ground pools. The only issue is the minimal instructions. Must read between the lines and use common sense. The gasket is made like a butterfly gasket that must be intact if you have a double hull pool, or like a vinyl liner with metal or plastic outside support. My Intex pool is just the vinyl liner, so I split the gasket carefully and installed it without draining any water. The water line was half way up the skimmer, but not a drop was spilled installing this. Just wait until all screws are tight to cut the vinyl liner - common sense, make sure the hose is connected first!! Be sure to install the flapper gate BEFORE putting any screws on or starting install. Just a little tricky to hold it in place. 2 people works best, but I installed everything myself with no issues. Must REALLY hold the outside unit TIGHT against the gasket when putting in each of the screws as they cut their own threads. Screw them down tight - the tough plastic will take it. I put in the 4 corner screws in first, starting with top 2 above the water line, and left all just slightly loose until all screws were started. It says to make holes for screws with blunt object - but that won't work as vinyl liner is tough. I used a small drill bit, much smaller than screw, but used pliers instead of getting my drill wet. Just held bit in the pliers and pushed and twisted. The first couple is when 2 people really helps, but even alone I did it easily. Then tightened them all down. The adapter to attach a vacuum hose comes with and works great. I didn't think it would seal well as it is just plastic to plastic, not rubber gasket, but works fine - the suction holds it firmly in place. A little tricky - put adapter on first without the hose, moving it around the flapper, then connect the hose. Make sure vacuum is in the water so it doesn't suck air. The parts of this unit are very heavy plastic. Nothing flimsy. Flow-through rate increased, as I can tell by the higher pressure and flow coming out the exit valve. A new one comes with this, but I didn't install, just used the old one. I will get a ball valve shut-off at Lowe's or Home Depot to install where hose connects. Good for doing any hose work or working on pump or filter. This is really a bargain.

I’ve seen numerous videos online for this product and was very excited to get it. It does not disappoint! Works brilliantly in conjunction with my Intex sand filter. Great flow and great surface pull to clear debris floating on top of the water. Easily installed. Just take your time, especially with cutting the pool lining. There are two ways of cutting the lining, either before or after installing the skimmer. I chose before as it gives a much neater looking ‘hole’ but both ways will work. Watch an installation video online first to get confident. Cut the lining very slowly and carefully ( it’s quite nerve wracking 😳 ) and you will be fine. I can’t say anything negative about this skimmer as there are no negatives. It’s a great addition to any decent sized above ground pool and works beautifully. Highly recommended 👍😁

👍

Sizlerde prefabrik havuz kullanıyor ve üzerine biriken böcek,yaprak temizlemekten sıkıldıysanız alın kurtulun :))

Brilliant.. was worried about cutting the pool liner.. so took the risk. Upraded to sand filter at the same time. Its impressive.

Kit came on time. Product was packaged well and works phenomenally. Positive addition to our above ground pool. Ensure the gasket fits the hole perfectly. Marking with the inner cover worked best cut just outside the line. If the seal has folds you will have leaks. Installed our test fit the seal and re trimmed 2 spots and tested once pool was filled back and no leaks.