BINLUN Stainless Steel Watch Bands 12mm-24mm Metal Replacement Watch Band SmartWatch Straight & Curved Ends Men Women fit for Samsung Galaxy Watch 6/5/4/3,Fit for Garmin Watch(Black,22mm)

I got this to dress up my women's Timex Expedition. The result was well worth the frustration of installing the curved ends. I really like the look of the curved ends, I think it really elevates the look. HOWEVER, it was a MAJOR PAIN to install the springs into the watch with the curved ends. My watchband is 12mm, so it's really tiny and of course this only made it harder. I had to shut the windows and listen for the "click" when the spring finally locked in. I'm stubborn and persistent, so I probably spent 20 minutes each end, wiggling around the tool, waiting for the spring to latch, and sometimes it would slip and fall out. I was also wary of scratching my watch, and that added to the time. So BEWARE. You might get lucky and not spend ad much time as I did if you go with the curved ends. Overall, I think the product is well-made. The curved ends are made of a thin metal, but it is indistinguishable from the rest of the watchband once installed. I think my effort paid off, and I am very pleased. Adjustment was super easy with the tool provided and the little manual. Overall, I am very pleased to have achieved the aesthetic I wanted.

I got this as a spare for my Carnival Tritium Watch, 40mm case model. It requires a 20mm band. That watch comes with a curved end band. Except for the ends that attach to the watch, it is identical to the original Carnival band. This band fits ok with the straight end if you don't mind the look. It doesn't look too bad, but I like the curved ends better. The supplied curved ends do not fit this watch, the pins do not line up. They do line up with other watches I have but not the Carnival. The good news is that the inner segments are the same width as the original Carnival band. This means that you can take the straight end off and use the Carnival curved end pieces. For my 20mm band, the inner links measure 10.85mm wide. They fit into an 11mm gap. The band is good quality and has good weight to it. The clasp is the same style as the Carnival. The link tools are decent for occasional use. If you are not good with small mechanics, go to a jeweler. You still need some skill to make it happen.

I like everything about this watchband but speaking as a guy with relatively small wrists, there aren't enough removable links to get a tight fit with my GPS smartwatch. Even just one more removable link would have been great. Oh well. It fits, just a tiny bit looser than I like. It's the perfect upgrade for my Amazfit GTR (42mm x 20mm band). The black gloss and matte finish is very good looking. The vendor includes a cheap pin removing tool which works fine if you know how to use it. You'll need something like a popsicle stick to raise the height of the band so you can center the pin remover on the link pin. Do not try to use the tool without doing this. You'll either bend the tool or scratch the band. Note that you push out from the flat side of the link pins; NOT the side that looks like a screw head (it's not). You reinstall in reverse. Put the flat in first and press the pin all the way back in. Best to use a small plastic head watchmaker hammer for this. If you use a different tool (like pliers or something), protect the band with tape so you don't scratch it. The hardest part is the spring pins for the band to watch connection are bit long. They are a real bugger to get snapped in. I found it easier to leave the band in two pieces and work from the backside of the watch. (Or you could find some slightly less aggressive spring pins.)

This is a wonderful looking watch band. I loved it so much I ordered another. Link removal was not as hard as some said for me. I believe there is a technique to it that I will share in my next review of the band I just purchased. Seller is also incredibly helpful. If you have questions/concerns be sure to contact as they are very supportive and understanding. Can't wait for my next band to arrive and write another review. If I am right about the link technique helping I will try and share that too. Very happy with my purchase! **Edit** I have purchased another band and it is just as great as the first. This time I had a few questions and the seller was prompt and polite when answering them and offered great solutions at no extra cost to me. I definitely endorse this product and seller. For any having issues with removing links/pins some tips-- Line up the pin with the pin removal pin then hold the band in place against the pin removal tool. One side of the pin will be slightly more inset than the other side of the pin, use that side of the band to remove pins and use the slight inset to your advantage by letting the pin removal tool rest inside the inset. Hold the band in place and slowly tighten the pin removal tool by spinning the knob. Keep it lined up as you go. Once it hits the plastic make sure the pin can push through the opening on the other side of the band and just tighten the knob a little more and the pin should just start sliding out. You can then remove the last of the pin with your fingers once it is mostly pushed out. The pins come out pretty quick and easy once you get the hang of it. Hope this makes sense and helps. Happy DIY!!

The band is exactly what i needed. Couldn’t find the original band online so I ordered this and It matched the gold tone of the watch really well. Cost was a quarter of the price listed for the original. It’s a great band overall.

Wasn't full black when arrived. It was that weird back and white stone pattern. Not true black as pictured. Also felt very flimsy and cheap. This isn't metal even though it was advertised as metal. Not durable at all. I will be returning.

今使っているシチズンの時計にピッタリでした 見た目も高級感があり（シルバー/ゴールド） 前のベルトよりも少し重たいかな～って思ったけれどつけてみると気になりませんでした

仕事をしていて、あたってすぐに外れ、合わせるのに手間がかかるので。使用していません？

なかなか良かったです

少々留め金の部分のロックが弱いようです 気づいたらロックが外れています 質感は気にいってます

Ho acquistato questo cinturino BINLUN in acciaio inox per un mio orologio e sono davvero soddisfatto. Il materiale è robusto e dà un aspetto elegante all’orologio. Il montaggio è stato semplice e veloce, gli attrezzi sono compresi, cosa che ho apprezzato molto. Il cinturino si adatta bene al polso e sembra molto resistente all’usura quotidiana. ✅ Pro: Materiale in acciaio inox resistente e di qualità Facile da montare senza attrezzi speciali Design elegante e versatile Disponibile in diverse misure per adattarsi a vari orologi ❌ Contro: Può risultare un po’ pesante per chi preferisce cinturini leggeri La regolazione della misura richiede un minimo di attenzione In generale, ottimo prodotto che consiglio a chi vuole un cinturino bello e durevole.