A17 iPhone 17 Pro Magnetic Thermal Case | CoolHyper | with Camera Control | IMD Technology | Compatible with Magsafe | Touch Translucent White

Purchased this Alumu A17 case for my 17PM because I wanted a white translucent case that wasn't crystal clear, but I could still see the orange color of my iphone through it. It looks excellent on the phone! There is a lot going on with the back of the case and it takes a moment to take it in. Fit is snug and it snaps on every corner. Not a lot of grip on the sides or back of the phone, but the texture feels good in the hand and I actually like that its not covered in rough patches that make the phone more bulky. It's not the easiest case to remove, and I think this is a good thing. Its snug on the phone and feels like there is no way it would come off if I were to drop my device. The magnet is also probably one of the strongest magnets on any case I've used. The speaker and charging port cutouts at the bottom are perfect. Buttons all feel clicky, and the integrated camera button works flawlessly. Camera plateau protection is good, and even the aluminum cover feels sturdy. I use aftermarket lens protectors on my cameras and the plateau lip provides adequate room where even the lens covers do not touch the table when i lay the phone down. My only complaint is with the screen side of the case. There is not much of a screen lip at all. I use a screen protector and the case is almost flush with the screen protector. If you use a screen protector I would say the case sticks out past the screen by less than 1mm. Overall this is an easy recommendation for anyone on the fence about this case. It's selling for $39 and I think this is a steal.

This is one of the most thoughtfully engineered iPhone cases I’ve used. The tolerances feel spot-on: the fit is precise, buttons and cutouts are clean, and it provides solid protection without feeling bulky. The camera bump coverage is especially well executed. The standout detail is the rubber gasket that interfaces between the camera bump area and the heat-dispersing metal cover. It’s a genuinely smart solution—adds a protective buffer, helps everything seat tightly, and keeps the whole assembly feeling rigid and durable. Magnet strength and alignment are excellent and it works perfectly with Aulumu’s magnetic attachments (which are also very well made). I liked it enough to buy one in every color. Easily a favorite—maybe my favorite iPhone case ever.

I’ve never spent this much on a case but it was 100% worth it, this is the best case I’ve ever had. The material is amazing, it doesn’t get slimy or greasy like other cases and it’s really easy to clean. The quality is amazing really feels like a premium case and looks really cool, I’ve gotten a lot of compliments on the case just because it looks so unique. I would 100% recommend this case to anyone, just the price is definitely worth it for the quality you’re getting. The fitment of the case is perfect and it doesn’t collect dust under the case like others do. Really easy to put on and feels solid. I will definitely be buying this case for my future phones as well.

The case comes in a simple package and is very easy to put on as the material is relatively flexible. It is not very bulky when is on the phone as well. The dual layer design looks pretty cool when it is on the phone and the overall graphics suits my aesthetics. I also want to mention that the camera button cover works well and the metal buttons are tactile and satisfying to use. However, that’s where the pros end. Upon putting the case on for the first time, I hear this pinging. While I understand the floating metal buttons to have some play while not on the phone, I find it unacceptable that the camera bump protective metal frame has some play when it is touched. Even when it on the phone, the frame still shifts around visibly within the cutout. Their manufacturing tolerances for the button and frame cutouts might need some work. I’m still giving this a 4 star review because I like everything about this case, the looks and the function alike. However, the camera bump moving is the reason why I will probably return this and try another copy. Maybe in black as I don’t like white/clear cases becoming yellow.

I really like the Aulumu Magnetic iPhone 14 Plus Case — especially for how it looks and feels — but after using it a while, I’ve got mixed feelings. The design is very classy. It has a premium look that stands out from typical silicone or bulky cases, and the MagSafe works great every time. Whether I’m attaching a MagSafe charger or wallet, it’s snug and reliable. However, the durability has been disappointing. On the first drop, the edge of the case started showing wear where the material rubbed off. Since it’s not true leather, it didn’t age well — it just looked worn and cheap after the impact instead of developing a nice patina like real leather would. For how sleek and polished it looks at first, I expected it to hold up better after normal use. So overall, I think this case is solid for everyday protection and style, but if you’re looking for long-term durability or real leather quality, it may not be the best fit. 📌 Pros: ✅ Classy, premium look that stands out ✅ MagSafe connection is strong and reliable ✅ Slim and sleek — easy to carry ✅ Comfortable feel in the hand 📌 Cons: ❌ Not true leather — material wears visibly after drops ❌ Edge finish scuffs too easily ❌ Durability isn’t as strong as other cases I’ve used If you want style and great MagSafe performance, this case delivers — just be aware the material may not hold up well to drops or rough handling.

This case is so very nice. It has complete coverage for the buttons, precise cutouts for the charging port and speakers and incredible design and protection for the camera are of the back. The design captured my attention when I first laid eyes upon this case. Its sleek and unique design is what made me want to check the reviews, pictures and read about it in the description. It also has some additional attachment(s) which I think is an interesting add-on for an iPhone case. I don’t purchase the add-ons. But, it’s nice to know if I want them. I paired this with the ESR privacy glass screen protector for both added protection and privacy. I’m using my magnetic Pop Socket with this case too and I just say it’s even more stylish of a case!! The grip is somewhat slippery, I’d say a solid 6-7 of being slippery (with 10 being like touching a wet bar of soap). You need a ring or Pop Socket to mitigate you from dropping your new iPhone. I purchased this as a Black Friday deal, so it’s a little cheaper so the value for money is very solid. The clarity is impeccable!! The ease of installation is great!! There’s a rubber piece that goes over the entire camera section, so you have enhanced drop protection and won’t scratch your camera area when taking the case off and installing the case onto your new iPhone 17/17 Pro line. Incredible functionality this case brings to my iPhone 17 Pro Max!! This case is a must have for you new iPhone 17 line up!! I’m hoping this company will still be around, expand and flourishing for years to come!! I’m truly impressed by the design of this case. Why, it’s because I usually go with these brands for my previous iPhones; UAG, Otterbox, Pelican, ESR, Spigen and other well known cases. Every so often I’ll come across a different brand that I think is cool or I need for utility (example: a case that has a built in camera cover). This case is so futuristic to me and I can really appreciate the thermal aspects.

I can’t praise this case enough. I’m extremely picky when it comes time to using a phone case and go through it every year. The time has come, I found the Bigfoot of cases. Everything from the design, feel in hand, and quality is perfect. One quick thing there is a rubber piece separate from case, that fits under the plate that covers camera to keep dust out. I feel like it should have been attached to case but there must be a reason why it isn’t. Everything from the case to the buttons feels premium. I love the colors as they go well with the orange and the clear shows the perfect amount of the phone color. It’s easy to install and the fit is perfect doesn’t add a lot of weight. It didn’t lift my case friendly screen protector. Everything lines up right. The mag safe is the strongest I have had in a case to this day. Just something to share that’s not a big deal for me, however the black metal on the back is powder coated and will scuff if it makes contact with rough surface. It’s paint so it’s expected. You can see some Knick’s in the photo but it almost makes it look even better IMO. And they also send it in a cool looking box.

Even though it’s initially slippery, it gets better over time. Had this for 2 weeks and now it’s perfect. Not too sticky and not too slippery. Best for iPhone 17 pro orange as the other cases pick up color from clothes and turn ugly. Not this one. Chose this for that exact purpose and it works awesome. Can’t be more happy for the looks of it. Very unique and catchy.

Nice case. I recommend

I was able to finally upgrade my iphone from the 13 to the 17 Pro and for the first time ever I splurged on a higher end case. Usually I stick to the $15 range but I jumped on a sale and got this for $42 and it's worth every single penny. There are quite a few things that this does perfect for my taste. First the design of it is beautiful with that cyber punk type of look. It's a conversation starter and there's been multiple times now where someone has asked me what phone I was using which hasn't happened to me in at least a decade. Next I would say the camera plateau protection is perfect. I was finding i had scratched the side without the cameras just a few days into owning the phone which pissed me off and was the main driving force into finding a case that had this type of protection. Haven't had an issue since throwing this on and I love that it comes with a slim rubber piece to protect the phone plateau from the metal on the case. The last few things i want to hit on are the buttons, magnet and fit. I never really thought how important buttons on a case were until I leveled up in price. These are ridiculously comfortable, clicky and responsive. Now the magnet on this case is another feature i didn't think I needed until I had it. It is very powerful to the point i need 2 hands to get it off the car charger in the car or the whole charger comes off with it LoL. Before I always had issues with it coming off super easy, those days are looong gone now thankfully. And lastly how does it fit the phone? Well it's pretty snug and it's not terrible getting it off when i need to but that's rare that I would do that now. I have the Frosted Black one and honestly it doesn't show any of the phone colour except where the camera plateau is which is exactly what i wanted. Now if I had the silver iphone I would of opted for the Grey Frosted one that looks really awesome together. Oh before i forget in regards to fingerprints I've tested it out. Over the course of a full day out and about in the city when i got home the case did have significant prints on it. Personally that doesn't bother me because i always wipe my phone down when i get home out of habit from Covid but I understand that may bother some people. As I said I do have the Black version so it may not be so bad on the Grey I don't know. Anyways, this is an easy 5 Star rating. In fact I'm looking into other accessories from this brand because I'm so impressed with the quality of the product. Highly Recommend

Rien à dire je ne connaissais pas cette marque mais elle est mieux que rinoshield pour la peine je compte commander une seconde coque de cette marque

Bonsoir madame, monsieur, j’ai bien reçu mon article mais que la boite mais sans le produit merci

Die Hülle besteht primär aus TPU und fühlt sich dementsprechend angenehm an. Die Knöpfe und der Kameraring sind aus Aluminium, was sich hochwertig anfühlt. Der MagSafe Magnet ist meiner Meinung nach auf jeden Fall stark genug, sodass sich sämtliches Zubehör einwandfrei nutzen lässt. Nun zum Design, so eine coole Hülle habe ich noch nicht gesehen, diese Mischung aus den Sci-fi Elementen mit dem dunkel matten Tpu und dem Aluminium führt zu einem wirklich einzigartigem Design. Das Design würde ich keinesfalls als „nerdig“ bezeichnen, sondern eher als anspruchsvoll, futuristisch und elegant. Wie hoffentlich auf meinem Foto zu sehen passt die Hülle farblich perfekt zum iPhone in Titan Natur. Den einzigen Verbesserungsvorschlag den ich habe wäre vielleicht das Muster der Innenseite auch nach außen zu bringen um einen bisschen besseren Halt zu haben. Ansonsten ist diese Hülle meiner Meinung nach perfekt und das Design und die verarbeiten sind mir den Preis wert.