13323 Class 3 Trailer Hitch, 2-Inch Receiver

Looks good and sturdy! Easy to install, the brackets both ends it needs to hit little bit with sledge hammer to make it straight. because it bends from shipping, that’s why it doesn’t fit when i try to install it for the first time…

This hitch fit my 2013 Tacoma perfectly. It was somewhat awkward installing it by myself but a floor Jack was the answer. I put a good coat of wax on it prior to installing, so it will hold up to the weather and road conditions. All hardware was perfectly sized and instructions were complete and precise. It is tucked up nicely under the bumper. It is made of heavy gauge steel and came with a nice coat of paint. This is a high quality hitch manufactured by a well known manufacturer. Worth every penny.

Great product, easily fits and installed quickly on my 2012 Tacoma. Instructions are easy to follow. Tools required are a 17mm socket (to remove existing bolts that hold the bumper to the frame), a 19mm socket (to attach the hitch to the bottom of the frame), a socket wrench, extension and a pry bar. If you leave in a snow climate where they salt your roads, make sure you have wd40 to spray the existing bolts and holes. I installed it by myself in less than 45 minutes, no need to Jack up the truck or remove the wheels. 2 people would make it easier because the hitch is pretty heavy but manageable. Solidly built and looks good. All parts where securely taped to hitch and in the box.

This is a very nice hitch kit. I am 78 years of age and my son and I installed this hitch with little trouble on a Tacoma 2010 vehicle. I do recommend removing the bumper and soaking the bolts you have to remove well in advance of installation. The installation goes much easier if two people do it, I don't care if you are 18 or 80. I highly recommend this hitch for the quality, fit and finish.

The alignment was spot on, very easy for 1 person to install

Their installation video states the rear bumper doors not need to be removed to install the receiver hitch. That should be true in theory. I installed this hitch by myself by strapping it to a floor jack with ratchet straps. I then wheeled it directly beneath where it was to be installed and began raising the jack, but it would not fit. I wrestled it for about an hour and became frustrated and was ready to return it. After calming my temper, I thought I should remove the bumper first since half of the bolts were already removed and that made things so much easier. The hitch raised onto the frame beautifully, but needed to be pushed in about an inch, which was accomplished with a mon-marring plastic sledge. Apparently, the frame slightly tapers inward towards the bumper, and is a snug fit at its final mounting location - that's why I couldn't get it onto the frame with the bumper still on. I really like the quality of the hitch and the price nice as well. I assume the poor rating is due to the instructions stating the rear bumper can stay on during installation. Maybe it can stay on, but it didn't work for me. They should add a note that it is much easier without the bumper.

Fits perfectly, took about an hour and a half to install by Myself with just basic handtools. Looks great and works great. No complaints from me at all

Bought this for a 2008 Tacoma four-wheel-drive. It was a very tight fit, but was able to get it installed with a little help of a persuader hammer. The bolts that go up into the frame is a little tricky due to the angle of one you have to use a short socket and ratchet and there’s not much room there. Overall seems like a great hitch. We’ll see when I put it to work. It’s nicely powder coated and has hardware included. I had to soak my bumper bolts with PB blaster the day before and the one that is farthest away is a tight fit, but the bolts that remain in to hold the bumper on need to be screwed out as far as possible to make it easier to install. It may be just as easy to take the whole bumper off to begin with.

The hitch seems very strong...and the fit is great. It took me awhile to install it but that was mostly due to the rusted bolts in the frame...not due to the Curt hitch product.

Mi esposo y yo la ensamblamos y fue muy fácil. La ha utilizado mucho con remolques y esta encantado, así no daña su camioneta.

Excelente calidad, la uso cada semana y muy bien

The hitch fit my 2010 Tacoma perfectly. A nice change from the old rusty one. It does not have the bracket for the 2 bolts that tie the OEM one to the bumper, but given how securely it bolts to the frame this should not be a problem.

A very solid and well-built trailer hitch and upgrade to my second gen two-wheel drive Tacoma previously I had the under bumper mount from Curt. After a year of using I've noticed some wear and tear and rust causing the bumper to twist so I upgraded to the frame mount. Diagram and instructions are clear if you are installing and live in salty province or state prepare for some heat and some aggressive removal tools for the 10 bolts to sandwich this hitch between the brackets I got a chuckle out of the diagram saying professional half an hour, DIY 60 minutes. It is a hard place to get an impact in Show some heat and some penetrating oil beforehand will help you out. Good luck 🔩🔧💪🏽