U.S. Solid Motorized Ball Valve- 1" Brass Ball Valve with Standard Port, 9-24V AC/DC and 2 Wire Auto Return Setup

Pricey but solid. they work solid and do make the zippy noise. These are not INSTANT. They take a couple of seconds to open or close. Great for RV tanks as you can barely hear them work. I haven't had one malfunction yet with gray water or debris. I got them on multiple tanks under the RV for almost a year, no problems (I do spray silicon lubricant into each valve every 6 month to avoid salt water corrosion). These don't overheat when left ON ( I leave them open all night when the temp drops below freezing) to empty the tanks and avoid ice damage.

I used this to control the water for an automatic evaporative cooler setup. It worked perfectly all summer exposed to full sun in 115°+ weather. It did not see much rain so I cannot confirm its water resistance.

Installed this valve in my home automation setup, and it's been working flawlessly. The auto-return feature is great—when the power cuts, it closes automatically, which adds peace of mind. The stainless steel build feels solid, and the full port design doesn't restrict flow. Wiring was straightforward, and it operates quietly. Highly recommend for anyone needing a dependable motorized valve

I've had this valve in service for a couple of months, and I have to say I am very happy. It seems to be working flawlessly. Installation was a breeze, and the only thing I did was reduce the supply voltage from 24V to 12V and add an LED to show when power was applied. The valve still works great since it is rated for 9V to 24V. It's a great choice for the project over a solenoid valve.

Bought 1" brass motorized 2 wire with manual function in 2020 for fuel transfer (gas). Worked great for 4 years (around 30,000 miles). Thanks to our great bridges, the clifts on and off, the gear head broke off. Due to time restraints replaced it with a stainless with same functions. Lasted well, untill the first time I used it. Took the seals out. Thankfully I had placed an emerg. shutoff above it. Ordered another bass valve identical to the orignal without the manual function. Same story. Replaced the gearhead on the orignal brass valve an so far so good. Think tolerance, these valves are blowing the O ring up past the nylon seal and jamming the ball. The only reason I didn't give it a 5 star is I have 2 I can't use. ? fuel use. but was told by the manufacture per phone call I was good to go back in 2020.

Nice for the price. Much less cost than dedicated water main shut-off valves with a Zigbee or Z-Wave automation interface. You will need a power pack to maintain current to this valve and keep it open. Purchase that separately plus any power switch control that you will have the power pack plugged into for your home automation. Plan to use this valve for emergency water main shut-off during a power outage, flood sensor triggered in the house or garage, or during an earthquake. My water pipes are embedded in my floor cement slab, so I am anticipating the possibility of a break if we have a severe earthquake someday here in Southern California. This valve will shut off through my home automation or security system when a vibration from an earthquake is detected, or one of my five water flood sensors are triggered from my security system. During a normal infrequent power outage I will need to have a 12 VDC battery to open the valve. This valve uses very little current once it is open to maintain the 'Open' state, but it will not remain open without power being applied, nor does this valve have a manual override to open it. You much apply power to it. It does operate with between 9VDC and 24VDC so you could probably open it with a 9VDC battery if need be in an emergency. A small 12VDC gel battery which is maintained by a small battery maintainer solar panel could also be used along with a manual switch to apply the DC power if power is lost to the wall outlet for the power pack. Then manual operation of the valve could be possible without the home automation or outlet power working.

Have been very happy with the operation of this product for a year. But then it stopped working a couple of weeks ago after we had some heavy rains. I knew it was getting power so I opened up the motor housing. The blue plastic cover had a bunch of water in it when I opened it. The rubber gasket was still there but it appeared so thin I can't imagine it keeping water out. Needless to say the circuit board being wet probably caused it to stop functioning. How hard can it be to use an appropriate gasket to seal a plastic case? Edit 1 week later: Updated to 4 stars due to great customer service to make it right. Manufacturer reached out to me and offered a new valve, despite it being > 1 year since I bought this. Will put some sort of additional protective wrap around the plastic housing this time. Can't give it 5 stars as it never should have had water ingress in the first place, but they did stand behind the product.

I needed to automate the flush valve our our sediment filter, to open for one minute once a week. Since there was a sprinkler timer nearby I needed a value that was energized to open and automatically closes when deenergized. And because of the large amount of sediment in the flush water I needed a ball valve instead of a solenoid valve. So this particular valve is perfect. I opens quickly when actuated from a standard sprinkler controller, and closes reliably when the sprinkler controller removes power. It has standard 1/2" pipe threads and installs easily. It's worth noting that this valve does not have a way to manually activate it, but I can use the manual mode of the sprinkler controller for that. It's only been installed a few weeks, but so far it's running perfectly.

Muy bue o y practico artículo y muy buena calidad

I bought this valve a week ago. After connect with pipe. It worked well. However, I found the water leak and have changed the fitting 3 times. I also used the fitting which work well with others valve. But the water still leaking. I hope the maker have a look to this problem and give me an advice. Thank you!

Very fast shipping from the US to Canada, received in a few days. Works great, have it hooked up to the main line Inside going to my underground sprinklers, so water pressure is not always on the outside zone valves. It's hooked up to the Master Valve out or pump 24 volt AC on the controller, When any zone is called for watering, it will open the Main motorized Ball Valve.

Very good

I hope it lasts because it works great. I'm using this to shut off the heat to the cab in my truck as the heater controls don't shut off all the way and still throw heat in the summer. Just have to hit the switch and no more hot air when I don't want it.