Aqua 3, Micro ATX Case, MATX PC Case with 3 X 120mm 3-Pin ARGB Fan Pre-Installed, Panoramic View Tempered Glass Front & Side Panel, with Type C Port, White

Oh my gosh, this computer case is absolutely ADORABLE!!! I LOVE it! It's actually roomy inside for everything I need. It's also very quiet and super clean looking. NO more big and bulky Cases for me. I have TONS of room on my desk now. Here are the before and after pictures. :) The Black case was before. This little White case is over half the size of my other one and I'm just absolutely Loving this. It's 15" Tall x 13" Wide x 8 1/2" deep. (from side to side in the front - 3rd picture) The Top has the metal mesh, and so do 3 sides towards the bottom so that enough air flow goes through, so your pc should not overheat. This is an Amazing PC case and at the very good price as well. :) If you are looking to go smaller on your Computer case, I would HIGHLY recommend this one. :)

Great budget Micro ATX case for those starting their first pc build. The case comes with screws and zip ties and the connector's you plug into the MB. My only issue is the manual it comes with has no layout or label of what screws go where so it’s trial and error. There is sufficient space on the back panel for cable management even with the addition of PSU extension cables which I used. The ARGB hub the case comes with is basic but gets the job done! Works along side with your motherboards RGB controller software. I was able to plug in 4 fans as well as the ARGB on my cooler into the hub. It’s a pretty solid case. The space to work with is tight so I suggest you streamline your build so you don’t have to take a step back and remove parts just to have clearance to move connections or parts. As for thermals this case operates with a negative pressure system which is not bad. I found that you can fit slim 15mm case fans on the bottom of the case to increase air intake. Personally I did not like the fans the case comes with so I did end up switching them out. The fans were built a bit cheaply and ran loud. As for my build here are my specs for those looking for inspiration. CPU: Ryzen 5 5600x GPU: AMD XFX 6750xt RAM: T-Force DDR4 3600mhz SSD: Teamgroup MP44 1TB MB: ASRock B550m pro SE PSU: Corsair RM750 Fans: Lian Li Al120 Cpu Cooler: ID-Cooling Frozen A610

This has been a great case for my first build. I love the smaller size while still having the fish tank aesthetic. Building with it was easy and I have not had any reason not to love it.

The pc case is great for the price! I did a full white MATX build and it worked great! The build quality is very sturdy and the glass is thick so it won’t break. It gets great airflow and is very quiet. It was very easy to install all my parts in it and the motherboard mounting options were MATX and ITX

Super big case wasn't expecting it to be the size it is but it works. Good quality and plenty of room for super long video cards.

Great looking case. Wiring was as easy as it ever is. My only warning, The air flow isn't good with the installed fans. Internal temps quickly rose to the point that the glass panel was a lot warmer than it should ever be. FIX Thermalright Frozen Prism 240 $45 liquid cooler, and replace the fans with quality/brand name fans.

Great case with included 3 fans, it's exactly as you see. Okinos has some of the most competitive cases in the budget segment, it's hard to beat this value.

Buying this case my biggest fear was whether or not my huge EVGA SuperNova 1600 watt 220mm long PSU would fit in this case. And the answer is yes! I have to remove the drive cage. And I was worried about the front IO panel connectors, but their was just enough room for the big PSU to sit next to it. What a relief. Also happy to report the Arctic Freezer 36 tower cooler fits perfectly also. By default all 3 fans are configured to blow out. I tried that briefly, but I decided to flip to top two fans to blow into the case and the rear fan to exhaust to create positive air pressure in the case. With the fan filter on top, that seems to make more sense to me. Love all the cable management holes, nice amount of room on the back side to hide stuff. This case was plan B. My first choice was sold out and now I'm so glad it was, because this ended up much better than I expected.

El gabinete es más pequeño de lo que uno se podría a imaginar ya que venía de un H6, midiendo este Oquinos 33.5 cm de largo x 39 de alto x 21 de ancho, la figura de una de las fotos mide 41 cm de alto y queda mas alta que el gabinete. Puede uno meter una gráfica que ocupe 2 slots de espacio de los 4 disponibles, si lo haces así podrás poner ventiladores en la parte de abajo que realmente te ayudarán a enfriar mejor el ensamble, ya que las partes malladas de abajo ayuda a qué los ventiladores de abajo de la gráfica respiren y den buen aire frio, así mismo el máximo de largo que pude medir con regla es de 32.5 cm de largo sin que golpe el vidrio lateral, podrias meter incluso una 4070ti súper de no se, AERO gigabyte que mide unos 30 cm de largo y tener un ensamble potente. Recomiendo ampliamente que pongan igual uno de los dos ventiladores de la parte de arriba metiendo y ya el segundo de arriba y el de atrás sacando aire. Mi ensamble es con una B650, un Ryzen 7600, una 4070, dos ram de 16gb cada, una fuente de poder de 750w plus gold y 5 ventiladores RGB duo de NZXT. Solo tiene dos detalles a considerar, el primero, que reemplaze los ventiladores de stock por qué realmente son la cosa más sencilla del mundo, no tienen controlador de velocidad así que siempre giran a las mismas revoluciones x minuto, si tienes la oportunidad de cambiarlos, hazlo, si no como quiera si te serviran en lo que le instalas algo mejor, y la segunda, es que en la parte donde se engancha la grafica al gabinete, los agujeros no tenian moldeado para tornillos, venia plano asi que tuve que poner un tornillo un poco mas grueso (de los que se usarían par sujetar alguna fuente de poder) para que pudiera apretar bien. Fuera de eses dos detalles, si lo que quieres es un gabinete pequeño para formato mini itx o micro atx y gráficas hasta 32 cm. Este gabinete es una opción muy bonita y se puede lograr un ensamble limpio y muy lindo.