OneXGPU External GPU with AMD RX 7600M XT 8GB GDDR6 RDNA 3, Portable eGPU for Laptops and PC with Thunderbolt 3/4, USB 4, OCuLink Port

This eGPU is about double the price of the commonly available 7600M XT variants but it provides a significant increase in performance. It feels like double the performance, but in reality it's closer to 50% better than the 7600M XT. I can run most games I play in 4k medium to high settings with over 100 FPS. This is going to vary by game of course, but I previously owned a 7600M XT variant, and I had to turn down lighting effects, etc. to get the games to perform at full frame rates but at the cost of the games not "looking as good". I tried the MOREFINE 4080 eGPU before purchasing this, but I had massive problems with stability and you have to rely on their "custom" drivers and it ended up being returned. With this eGPU you can use the drivers that are provided directly from AMD and does not conflict with your integrated graphics if you have an AMD CPU. The build quality is excellent, metal body, and feels very premium. One thing to note is that this supports both thunderbolt and oculink. I am using oculink for the best performance possible, but when using oculink you loose the ability to use the integrated m.2 slot, network port, and usb hub. I did write ONEXPLAYER about this and they confirmed this is the case, and that I could try connecting both oculink and thunderbolt connections, but I have not been brave enough to try this yet. I will update this review when I do get the courage to try it. But if you're using the thunderbolt connection, everything works as expected, you will just take a little hit in performance due to the reduced bandwidth of thunderbolt compared to oculink. If you're using oculink, this does not include a cable, so you will need to source an oculink cable. Also, always connect the cable when both your PC and eGPU is powered off. Then power eGPU up, then your PC. When shutting down, shut PC down first and then power off the eGPU. Another thing to note is that it sits upright, like a tower. It is not designed to lay flat. It pulls in air from both sides and exhausts it out the top. You can definitely hear it when it ramps up, but if you're wearing a headset or keep your game volume at a decent level, it's not going to be an issue IMO.

I purchased the OneXGPU 2 through Amazon and, unfortunately, the unit was defective (Dead on Arrival). After contacting the seller/manufacturer, I followed all instructions for warranty evaluation. This included paying out of pocket for return shipping via UPS (USD 52.33), sending the product to the authorized address in the United States, and providing all requested documentation (invoice, tracking, and proof of delivery). The product itself was eventually refunded, which I acknowledge. However, despite multiple written requests and providing full proof, the seller/manufacturer completely ignored my request to reimburse the return shipping cost that I had to pay in order to comply with their warranty process. This left me with unrecovered expenses that were clearly incurred because of a defective product and at the seller’s request. After several follow-ups, my messages simply went unanswered. While the product refund was completed, the post-sale and warranty support was disappointing, unresponsive, and left me with unnecessary costs and frustration. Buyers should be aware that even when you follow all warranty instructions, you may still be left paying additional expenses with no response or resolution. I hope this review helps other customers make a more informed decision. Unfortunately, due to how this case was handled, I am very disappointed and would not consider buying from this company again.

I use this egpu with my legion go and my MacBook. Legion go works great after some tinkering. Need to sideload drivers for both integrated and external gpus. 780m for integrated Z1E and standard 7800m for egpu. Worked intermittently at first. I thought it was the USB cable, I was over heating due to a bug. Had to turn off turbo boost on the CPU after editing the windows registry. Works great after that. Im using amds software now because of the driver changes and everything is stable. Thinking about ordering an occulink to m.2 adapter and installing it with a custom back plate and booting via USB. MacBook. This will not work with M series macs. Intel macs will work under Windows via bootcamp. Not macOS. Macs will work with RDNA 2 egpus but support never got made for RDNA 3, I suspect that as Apple moved to their own chips they wouldn't upgrade support for intels chips. So windows only here. Overall. With frame Gen and upscaling, PoE2 med settings. 60-100 game world VS town. Black ops 6 - 165 stable med-settings. I got rid of my desktop and strictly use my Legion Go as a hand held and dock it for desktop use when I get home. I get less performance on the gpu bjt the CPU speed and ram made it worth it. The convenience of having my "desktop" with me is worth it, especially when my getting close to desktop performance when I get home.

I originally ordered one and it worked initially but after attempting an Oculink connection it failed to boot. I was able to use another EGPU to get the Oculink to work on the um780 XTX I had this connected to, and borrowed another OneXGPU and GPD One and got those to work. I got a lemon. I found the included cable is trash, and after using a Razer brand active thunderbolt cable my initial problems vanished, but the lemon didn't power on with that. Le Sad. So the take away is know the problems of getting the drivers to work and detected properly, but also making sure the cables work correctly. I had to use 4 oculink cables before I found the right one, a little ironic because they all worked on the JMT EGPU stand I own. I'm disappointed mine didn't work after the initial powering on, but using borrowed EGPUs I can say the one I got was a lemon. The only real downside is the problem of the epgu frying itself due to the fans being controlled by the USB4, so that's a definite knock on a star. They need to make sure the fan is controlled independently of the USB4, as users can easily fry it without knowing.

I ordered this because my NUC's integrated graphics had 2 issues: 1 - the heat it generated was ridiculous, which kept the fan @100% and was way too noisy. 2 - Photoshop no longer supported it. I've had this since May '24 and it's performing well. The port options have given me what I need to run a 32" 4K monitor via DP, and a 16" 4K USB C portable display - which I use via HDMI with the NUC. I also installed a SP 4TB NVME which I use for video editing files with no issues. I also travel with the ONEX and the NUC. I don't do any gaming so I cannot attest to those capabilities. My NUC runs way better by offloading the graphics to the ONEX and Photoshop is happy too. And video editing is happier too. I also enjoy the magnetic NVME door to be able to remove the 4TB stick easily and put in my Sabrent M.2 enclosure for portable storage on the go. I know it may be hard to justify the expense to some, but it's given me a lot of flexibility in how I use my system. My only wish is that instead of having 2 USB A ports, it had a USB C PD port replacing one of the A ports. Oh, and that the power plug was straight out instead of right angle. There's no reason to be right angle when all of the other cables go straight out. I have accidentally popped the plug out several times when moving it due to the right angle plug getting caught on the monitor stand.

This is a fairly small eGPU featuring the Radeon XT7600M and is probably best used with a handheld device or non-gaming laptop (example Legion Go, ROG Ally, Steamdeck, etc). It provides a nice boost to FPS in most games I tested. It had a little better performance when using an external monitor as opposed to my Legion Go's built in screen. The biggest downside for this is the size of the power supply, it is massive, almost half the size of the actual eGPU. Since I bought this for portability it was definitely a drawback. I was able to find a third-party power supply that was about half the size of the included one. Given the power requirements, I don't believe you would be able to power it from an external power bank. So while it is small and easily portable, you are still tied to an outlet. I haven't had any issues powering it from an airplane outlet (or the lounge beforehand), so it is still definitely great for travelling, but there are limitations. With the price it really only makes sense for certain use cases. If you are remaining stationary there are more powerful options, but this excels as an easily portable eGPU if you are a frequent traveller. Very easy to setup in most hotel rooms. It provides a nice performance boost to your gaming if it meets your use case.

Very quick delivery (earlier than anticipated) and hardware in perfect conditions. The card works perfectly with my Microsoft Surface Pro 9, providing a great performance even under stressed conditions, and is perfectly compatible with my Samsung EVO 990 pro. I would buy it again.

TLDR: This isn’t anywhere near the wonder device the company tries to promote it as and customer support is non existent. I bought this to use with my ROG ALLY X. I was under the impression I had to do a driver update to get this to work, how wrong I was. You have to manually install a driver, which still isn’t the issue. The problem is the driver you install has to be manually updated every single time and WILL be written over by windows updates and you’ll have to manually install it again! This is no where near the relm of a “plug-and-play” device, at least for a ROG Ally X. As far as customer support? You get a link to a YouTube video and a number in China you have pay to call. Totally unacceptable for a product in this price range.

Tenía mis dudas pero jala chido Vale la pena, solo ten en mente comprar una base porque se calienta bastante he visto que llega a 80 grados Celsius a todo lo que da bueno lo conecte para una legión go y si da batalla