Side Load Flow Bicycle Bottle Cage, Left or Right Side Configurations, Secure, Easy Bottle Access, Durable Bike Bottle Holder

Perfect solution for frames with a tight front triangle. Hold the bottle securely until you need it.

Works great with a camelback podium chill 24 ounce bottle on my Trek Marlin large frame. I previously had a standard top load instead of side load, this one fits much better with larger bottle.

It does not come with the machine screws to attach to your bike. Other than that, it’s great for the price

The LEZYNE Side Load Flow Bicycle Bottle Cage, left or right sided, perform as promised - light weight, sturdy, easy to install, and providing quick access to your water bottle. By contrast, a top entry cage of any brand requires enough top clearance to pull the bottle out (without looking), but a cage on the seat tube might be too close to a tire pump strapped to the top tube to allow easy top access - enter the side load cage to solve the problem. One warning, a right-load cage is oriented for right side access when in front of you on the down tube. Move the same cage to the seat tube (under you) and it becomes a left side access cage (draw a picture or just trust me). So, if you are right-handed and want a side access cage on the right for your seat tube, buy the left access cage. Second warning is only for cyclists in the habit of picking up a latte or any other drink in a cup with collapsible sidewalls. I bounced a full 20-ounce latte out of the side access cage under my seat tube going over a low curb. Problem now prevented by either asking for a double cup to make it stiffer or by using a mini-bungie cord wrapped around the caged latte and the seat tube.

Light, durable and strong. Install was super easy and getting a water bottle in and out is even easier with the prefect positioned side open. No worries about the hold at all as it will hold a full bottle on the bike trails and ontop of your car at 90mph. Overall 10/10

A few sentences added to this products description would help it out a lot. This cage is not metal, it's a hard nylon like plastic. Both a RIGHT and a LEFT version are available, but that direction is dependent of where the cage is mounted. If you mount it to the downtube (the slanting tube right behind the wheel) a RH cage releases right, and LH version releases left as you are seated on the bike. If you mount it on the seat tube then they are reversed, RH releases left and LH on the right. They are opposite because the bosses face different directions. So if you get two of these to mount in a bikes triangle on an average street or road bike and want them to release on the same side, get one of each. Most all water bottles will fit this, however smaller bottles may not fit tightly and overly large bottles may fit extremely tight or not at all. It will fit most 'regular' bottles. Unlike metal cages there is no bending to tighten or loosen them. Some have sanded the outer lip a little to make then easier to release. I have an ebike with a battery on the downtube that makes the one and only bottle boss location on the seat tube, the boss is also a bit high to clear the battery so the old fashioned metal cages make it real difficult to pull or place the bottle, especially while moving. These work well. And look great. Good price too.

bought for my wife's miniature (ok, she's a little short) specialized dolce. bought two, one right and one left, so that they both open on the same side (down tube and bottom mount). overall, they are decently made. we use camelback podium bottles, both insulated and non-insulated, and both fit. you can slide directly sideways by pulling the top of the bottle. bottles fit snugly. on the first ride today, the bottles stayed in quite well. they are on the heavier side for a water bottle holder (about 50g), but it does the job. the one complaint, which is kinda major, is that if you have a clamp-on front derailleur, this bottle cage has no clearance for that. I have multiple bikes and multiple bottle cages, all my bikes have clamp-on front derailleurs, and every bottle cage (4 types so far) I've purchased has space to allow for this when installing on the down tube. except this one. the good news is, with a little elbow grease and a coarse file, you can make it work. see the user pics that I've posted. it is an easy 5 min mod, but it really should not be necessary. I guess you get what you pay for. ultimately, given the nice sideload with both right and left options, I would probably buy again if I had to replace. we'll see how they hold up over time.

Durable. Color options good. I need the side loading because of frame so these are perfect.

does not grip bottle, slides out easily with a bump, the bottle does not sit flush with the cage either... side loading is a great idea, but badly executed for long term hold. the plastic is too flexible.

Da anni utilizzo questo portaborraccia minimal, lo trovo semplicemente perfetto: piccolo, robusto e bello!!

perfecto para una botella pequeña, encaja super fuerte, no se mueve.

Lo hemos recibido abierto a derecha y en la foto viene a izquierda.

女性用のフレームのため通常のボトルゲージでは上方向からボトルの抜き差しをすることがかなり困難だったたため、こちらの商品を購入しました。 実際に使ってみて、横方向から女性の力でも問題のなく抜き差しすることができました。 ボトルの固定力もキツすぎず緩すぎずほどほどで走行中に落下するということはなさそうです。 フレームが小さく悩んでいるようでしたら、まずはこれを使ってみるというのは有なお手頃な商品だと思います。