NEIKO 40339A Cordless COB LED Work Light with Rechargeable 4,400-mAh Li-ion Battery, Up to 11.5 Hours of Run Time, and Max Brightness of 1000 Lumens, Black

I'm just a home mechanic but do more than average repair tasks and love this light! I use it mostly in high and most recently used it to replace the lift pump on an older Dodge diesel. It ran for 6 hrs straight! Magnet is strong enough to hold it in any position and the light output is amazing! Lightweight too... It's my go-to light for all my repair work now. I do turn it off when I know I'm going to be away for a few minutes, and also plug it in to recharge as much as possible... After all, it is battery powered! Overall a really good light! Much better than the old incandescent or flourescent that always needed an extension cord... As far as I'm concerned, those days are long gone! I'd buy another in a heartbeat! Update 4 years later: light is still amazing and I’ve used it pretty regularly and hard! But what I’ve noticed is that it seems like the battery is reaching the end of its practical lifespan. It comes on at full brightness but tends to shut itself off after about 30 minutes use. It turns back on without issue, but continues to shut itself off after a short time. And the battery is not replaceable. That being said, this light served me very well and a 4 year battery lifespan isn’t bad in my book for something I’ve used so much. I will definitely be purchasing another in the not too distant future! :-)

This is the best portable work light that I have found. I own the previous version (model# 40464A) and decided to get another one to keep in my truck for emergencies. While going to order another I noticed this newer version and ordered it instead. This light has the same exact construction as the previous model, however there are some very nice upgrades. First off, it is noticably brighter on its high setting and seems to provide a more spread out “flood” style light. The new power switch looks similar to the old version but has a spring return; each time you click it to the on position it goes to the next mode which are as follows: high, medium, low and off. One of the biggest improvements over the previous model is the different style charging port which is the same as most modern phones use (micro USB) allowing for the light to be charged on the go in your vehicle if you have an existing USB phone charger. The charging indicators have been moved to the light itself on the same board as the main light and are easily visible in daylight. In short, this is just an improved version of the previous model that everyone loves and has the same durable construction. The magnet mount is great for sticking it places where there is no place to hang a normal work light and it wont scratch paint because it has a soft surface over the magnet base.

I first purchased this drop light back in 2018 for my dad for father's day. Suffice it to say, he absolutely loves this drop light! So much so, in fact, that this year for father's day, he asked me to get him another one because he lost his original due to some accidental breakage recently. I actually wound up buying 2 more (one for my dad and one for my father-in-law)! My dad's favorite things about this light: 1. Strong magnet keeps it in place hands-free 2. Very very bright! 3. Highly adjustable/ versatile 4. Holds a charge for at least a full work day and then some If you're looking for a drop light that's not only good quality, but a great price as well, look no further! The Neiko 4033A is just what you need in your life!

I have the version with 3 lighted settings. I have to say that I was hesitant to order this cordless light, as it was priced in line with a corded version of the fluorescent-type I've used for many years. I've never before used anything without a cord for automotive tasks, and it took no time at all to appreciate the overall advantages of this type in many cases. Its slimmer cross section can squeeze in closer to illuminate places my corded light will not quite make it into. The magnets ARE strong enough to hold the light in position much of the time (if a reasonably close, flat surface is available) but the thin plastic tape-like covering over the magnets wears quickly. Noting that, some people may encounter an issue when using the magnetic feature of this light as there is a strong possibility of scratching a delicate paint surface if positioned on such a surface. ESPECIALLY IF ONE WORKS IN AN AREA WITH RUST AND METAL SHAVINGS PREVALENT. I have mostly older cars where the paint finish is not my ONLY concern, yet I still found myself continually cleaning off the tiny bits of metal dust from grinding that aderes to the magnets, in order to prevent scratches in the clear coat. This is how I noticed how quickly the UNFORGIVING magnet covering was wearing. I still appreciate the utility of a corded version in some situations, such as when the magnets and hanging hook are not quite enough to position the light in a stable position, where a corded light can often create its own suspension points. I found the battery life to be quite good when using the light on its lowest setting-easily a standard work day's length. (Noting that I have reasonably good working light light levels from overhead residential garage strip-fluorescent lighting.) The most time consuming steady work I've used this for so far involved very close grinding for hours using a Moto Tool to first remove AND SAVE rusted on brake drums and then welding up the resultant grooves in the axle flanges and the followup grinding, during which I did not require more than the lowest setting. One last point in this light's favor. Although I have leady knocked it off its magnetically attached perch a few times, this light does not seem to be effected by hitting a hard surface-something that cannot alway be depended upon when using a fluorescent light and ESPECIALLY not when using an incandescant light source.

Very sturdy well built light. The 3 light settings are nice if I know it’s going to be on for an extended period of time so the battery lasts longer. Bought a second one after the first impressed me enough. They get used and abused every day for my job. Holding up well.

I really like rechargeable LED work lights. But they can be expensive, and designs have evolved, some for the better, some not. Some issues I've had -switches that are hard to press, hooks that don't work well, cases that break easily. This light is small, rugged, and bright, it has a simple (albeit small) rocker switch which toggles through the 3 brightness settings. The battery life is good. The hook at the top pivots and folds so you can point the light where you want it, and the magnet on the side works well in a number of places working in and under cars. The USB charger is a great change from older chargers, as it the light can be charged from my other chargers, in the car, etc. I've had it for 9 months at this point, and it's a winner in my book. Update - 4 years in, still working great. Had to glue the sleeve to the light as it was slipping off, but everything else is going strong. Good battery life, bright, hard to beat.

I bought this lamp in preparation for some work I needed to do in the attic. It's always a pain to run an extension cord up with me, and try to set up a light. This item really did meet my needs. It arrived quickly, and I charged it up right away. It comes with a strong magnet for use on certain metal surfaces. But I needed to hang it from a rafter. The hook included allowed me to place it strategically on a rafter, and aim the light right where I needed it. And it produces a lot of light! There is an adjustment that allows you to select the intensity of the light. Because it's LED, it's not producing heat. In the past, I've gone up to the attic with a halogen work light that felt like a focused furnace in an already hot attic. The light is large enough to provide adequate illumination to work, but it's not large overall, so easily stored. My only wish is that there was a way to store all the "attachment components" (hooks and magnet) on board at the same time, so it was always all together. Can't speak to how long the battery stays charged. It lasted for the hour or so that I needed it in the attic, and still has its charge a few weeks later, though I haven't needed to use the lamp again since the initial charge. I'm hoping it stays ready for a long time.

I just received the light so can't comment on batter life or longevity statements. What I can tell you is that it arrived on time, the product is exactly as indicated. I am happy with the quality of the work light. With the aluminum barrel and poly carb over the COB LED I am sure this will live up to the challenge of many years of service. The light is bright as all get out. This being a solid strip and not individual LED bulbs, you can not look at the light, even at a 45 degree angle. It is very bright. Unlike other LED lights on the market that rate themselves as 1000 lumens when it really is more like 450 lumens, I believe the Lumens rating of 700 is probably pretty accurate. I have two other cheapo lights rated at 1000 that are not as bright as this 700. Thanks for being honest on the lumens rating. This will be my go to light in just about every situation. Rarely do I need a light beam unless I'm hunting for something I lost. This things lights up the room, very bright in the immediate work area. Estimating the lights usefulness (these are estimates) I would say having the light stationed at a distance of 6 feet away from your work it adequately lights up an area 16 foot wide and spills out after that with almost 180 degree coverage. At 3 feet away, about a 8 foot wide area.

It did not last 11 hours more like 4 hours

Uses cheap unreliable components. Better shop lights out there for less money.

I bought two of these light they didn’t last a month . Both has swift issues and battery issues , no warranty ?

Pour le travail