- HTEM5 MoCA 2.5 Network Adapter (2-Pack) - Extends Network via Coax | NOT a Modem/Router/WiFi | Requires Cable TV Wiring (NOT Satellite) | Works with Cable & Most Fiber (NOT AT&T) | 2.5 Gbps

My daughter was complaining of the WiFi but she did not have any Ethernet drops in her room but had a single cable connection so ordered this set and she is loving the speeds! The speed test is in the 900s (I have gig Fios) with low ping and latency times. Very easy to setup. In her room, just plug this into the cable outlet and her computer (plus add power). In the basement, connect the other one to the other side of the cable (it’s a direct run) and then into the switch for the router. Works beautifully (with one windows caveat). The hardest part of the install was finding which cable in the next if cables in the basement. I used one of those “tone” devices. Connected the tone generator in her room and then used the wand side to identify the cable. Without that, would have been a lot of trial and error. On the Windows install, I was running a Speedtest and noticed Windows would lose internet access. So I ran a ping -t to the router and kept doing the speed test. That told me windows was having an issue. To resolve it, I turned off the power savings on the Ethernet port and it’s been stable ever since. While a little pricey to do the whole house, for specific places this is great!

Set up was easy. So far they work as advertised. I would recommend this product.

These MoCA 2.5 adapters worked perfectly for my setup. I needed a fast and stable connection in a room where running Ethernet wasn’t practical, and this solved the problem instantly using the existing coax cables in the house. Setup was quick and straightforward—plug in the coax, connect Ethernet, and the link established immediately. The connection has been extremely stable with excellent throughput, making it perfect for streaming, gaming, large downloads, and working from home. As a cable technician, I’ve worked with coax networks for years and was impressed with how well these adapters performed. I tested them in a 100-year-old house using older copper-braided RG59 coax and was still able to achieve over 1 Gbps throughput with zero packet loss, which was really impressive considering the age of the wiring. I’ve used these both to extend Wi-Fi coverage by feeding another access point and to connect a network switch for additional wired devices, and they’ve worked flawlessly in both scenarios. Latency has been low and the connection has remained stable with no drops. The build quality also feels solid and well made. One note: if your coax cable is damaged, corroded, excessively long (150+ ft), or already had signal issues before installing MoCA, you may experience connection problems. In most cases that would be related to the condition of the coax line itself rather than the MoCA adapters. If you already have coax wiring in your home and want near-Ethernet performance without opening walls or pulling Cat6, MoCA is an excellent solution and these adapters deliver exactly what they promise. Highly recommended. ⭐⭐⭐⭐⭐

Really great product that does what it says. I do not use my Coax at all, we got rid of cable internet and TV years ago, I opened the connection box up on the side of the house and tied two of the lines together with a simple adapter. Now the Coax cable already in my home is carrying 2.5Gbps throughput. I was able to confirm these speeds by using iperf3, the device 100% can achieve a full 2.5GbE link out of the box without any special configuration. it comes with everything you need (Except the adapter to connect the lines in your walls, but if you already have the lines connected it may work already!) Price is reasonably and the device requires no drivers or special software, they just work out of the box requiring only electricity on both ends, no complex install.

I moved my office setup to my unfinished basement where I have no ethernet cable feed from the Xfinity router upstairs on the first floor. I can get a pretty good wireless connection, but I have too many devices that I want/need to have a fast stable network connection. My main Xfinity cable connection comes into the basement and then splits to the rest of the house. Thus, I heard about and researched MoCA 2.5. The set of devices arrived packaged neatly and in good shape. If you've done your research on how to setup a MoCA network, then the connection of the devices will be pretty straight forward. I purchased new coaxial splitters rated for use of MoCA to ensure that the network to work properly. Also, you will need a MoCA PoE filter device, sold separately, on to the main cable TV/internet cable that comes in from the outside from your cable company. This needs to be added BEFORE the first split in the house. This prevents your network signals from leaking to the outside via the coax network. Once setup, my MoCA devices and network switch all indicated that my network was running at 2.5Gb/s. I was happy. The only bad thing that I encountered was the lack of instructions on that you may need to make changes on your router. There were no indications on the small "Get Stared" card included in the box. Upon initial setup, connecting the MoCA knocked out the wireless and wired Xfinity network. After about 45 minutes of Googling, I finally read that the Xfinity router has a setting for MoCA in its advanced settings which is not easy to get into. The MoCA setting was already "Enabled" but the things were still not working. More Googling. Eventually I read that with some MoCA devices if the router's MoCA setting is enabled, the network may not work because the MoCA devices could be trying to push Its own signal and would conflict with the router's setting. I changed the Xfinity router's MoCA setting to "Disable" and the entire network ran smoothly. It would have saved me a lot of time and headache if the instructions included some information about this. Otherwise, I am very pleased that I have a wired ethernet network in my basement via the existing coax cable network in the house.

I used these coax network adapters to provide quality, high speed Ethernet to my Apple TV. When I added a home security system to my wireless, it made my Apple TV unreliable. These Hitron adapters worked great and were easy to install.

When I purchased these, I was in the process of transitioning from Xfinity to Ziply Fiber. The house contains coaxial lines in every room and they have worked well when working from home. After putting the POE filter on and updating a few splitters, it connected to the system right away. I had to force IP addresses, on the router, because they were drifting when a wifi extended was being configured. I'm getting ready to buy two more. This system is running in 1gb for now. I installed a Netgear Mesh adapter in a dead sport in the house with the moca adapter. It now broadcasts in Wifi 5 throughout the property without any dead spots

I bought this Hitron MoCA 2.5 adapter to run an ethernet connection through the existing coax cables already wired into my walls, and it works perfectly for my use case. It provides a rock-solid, fast connection without any drop-offs. The only minor downside is that the status lights on the unit are fairly bright and constantly flicker on and off during data transfer, which can be a bit annoying if it's sitting right in your line of sight. However, because this is a wired adapter and doesn't rely on being out in the open like a wireless router, you can easily tuck it away behind a desk or furniture to hide the blinking lights. Overall, it's a fantastic, reliable solution for anyone looking to convert their home's coax outlets into high-speed ethernet lines!

This product is excellent. Was having Wifi issues with “Smart LG TV” which was downstairs and through a few walls and one floor. Since coax jack was nearby I used this MoCA to basically hardwire the Smart TV so it receives internet signal over hardwired ethernet. No more dropped or glitchy signals. Quality product for good price. Easy setup, easy setup instructions. You need two MoCA’s to do this and having a 2 pack was handy. Comes with 6’ ethernet jacks (2 of them), power plugs/adapters, and 6’ coax cables (2 of them). Would buy product again.

Me sirvieron para interconectar 2 switches con puertos a 2.5Gbits la ventaja es que ya había cable coaxial y era complicado poner un cable ethernet, el precio me pareció un poco elevado.

Does whatnot Dayz in the box Easy and simple to install Really helps when you renting and can’t run your own plan cables and there is existing coaxial installed. Great solution Side note: This unit won’t let u send tv and Ethernet at same time it would need to be one or the other so if u need tv and Ethernet some models do that.

This unit arrived on time and worked correctly and was easy to commission....

Technically these work but I'm getting less than 100Mbps so it's slower than the wifi 6 that I've already got. The main problem though is that I ordered them from Amazon.de (Germany) and they came from the USA. They were supplied with American plugs which are no use to me and I had to pay import duty from the USA. That is not why I use Amazon.de! When I've paid for delivery I expect them delivered and I expect European plugs.