Syntus Precision Screwdriver Set, 63 in 1 with 57 Bits Screwdriver Kit, Magnetic Driver Electronics Repair Tool Kit for iPhone, Tablet, Macbook, Xbox, Cellphone, PC, Game Console, Blue

This set is ten times better than I was expecting. I use it for working on small electronics and radio control trucks and boats. It is holding up very well, it is well organized and easy to find what you need. I honestly don’t think I could have bought a better set without spending over $100. It really is that good for dealing with small and uncommon screw and bolt types. It even has a little button that stands the bits up on an angle to make them easier to choose from and pick up, then collapses so it is still very compact. I have yet to encounter a tiny fastener that this didn’t have the driver for. My recommendation is to buy this and have it in your drawer for those tiny items that we might otherwise throw away. It would make a great gift for anyone who likes to tinker and fix phones, glasses, RC cars, pocket electronics, or the like. I am only writing this review because it’s that good. I didn’t get mine free, nor was I offered any compensation for my review. It really is just such a nice set that I felt I owed the other picky analytical shoppers like myself a time saving statement that they should stop shopping, and just buy this set before it is not available or triples in price. It’s quality and a surprisingly low price. Exactly what I always try to find when shopping! Happy shopping!

Review of: Syntus Precision Screwdriver Set, 63 in 1 with 57 Bits Screwdriver Kit, Magnetic Driver Electronics Repair Tool Kit (S2 Steel bits) This is one of the best sets of tools I’ve bought in a long time. So much versatility in such a small set of tools. I love it! And, the box that houses all the bits...kicks ass! There’s a little button you push, and all the bits pop upward, making it easier to remove and reinsert the bits, then just push down on the aisles of bits and they fold down into a locked position...so cool! The quality of the bits seem good; but time will tell. The design of this kit is fantastic. The bits seem strong and sharp. The other pieces are very helpful, especially the flexible shaft to get at screws in tight spots. There was a lot of thought that went into this kit. They included a product information card, that suggests that I register the purchase with their company for an extension of 6 months to their 12 month warranty, making it 18 months. By then, I should know the real quality of the S2 steel used in the bits. This is a great purchase if you work on electronic devices. I purchased it because I needed a special security torx to fix a microwave....I’m so glad I did!

I needed metric and imperial torx and hex drivers, and was looking for a low cost bit set for electronics and precision mechanics. I have several "Kobalt" sets, but they are not compatible with metric fasteners frequently found now. I came across this one and just ordered it. I am impressed with what I received. There are many bits and socket wrenches of different sizes, the driver is made of metal, the socket has a locking for a bit so it will not fall out, and there is even an adapter for using these small bits with 1/4" hex driver or drill. There are bits for tamper-resistant screws (triangular, torx with central pin, Y, etc...). The most interesting is the box - as pictured, the bits are stored flat. But with a single turn, all bits may be placed vertically for convenient picking, and then can be flipped back for compact storage. Did not check the hardness yet, but first impression on quality is very good.

I had a repair that had required a mini Torx driver. Couldn’t find my General Tools (GT) set so decided to just get another set. This set is definitely an upgrade from the GT version. All the pieces are heftier and changing bits is easier than the GTs insert a shaft and lock on. The handle on this set seems a bit large and long in my hands (I wear a size large glove snugly). Not as maneuverable as the GT and Craftsman mini screwdrivers. I don’t know where they get 63 pieces unless they are counting the case. All the items pictured are included. A few items to note. The handle is about 5 3/8 inches long. The top is the typical spinning cap. There is an extension feature that will make the tool up to 8 ¼ inches long without the bit. There are 5 settings total for the length. Extended at any length, the shaft is a bit loose. Only the shortest setting feels solid. The bits appear to be the standard polished steel. They are not magnetic. The handle has the magnet imbedded in the bit holder. The flexible extension also has a magnet in the bit holder. The magnets are what actually hold the bits in place, they do not lock in. There are 9 bit holders that hold 6 bits each. Unfortunately, the positioning of them has the bits covering the display of which bit is in the next holder. Only the first (bottom) holder is clearly visible. The form holding the driver handle, flexible extension, ¼ inch adapter and the bit holders is a cheap clear plastic like what you see on clamshell packaging. I figure that will be the first part that fails. If you did the math, 9 bit holders with 6 bits each is 54. There are two bits that just float around in the box. The ¼ inch adapter is held in place inside the box by that clamshell material. The three plastic openers, to open phones and hard drive cases, also float in the case. It looks like they were an afterthought just thrown in. every time I open the case the guitar pick falls out and the other two pieces just get in the way. I could definitely do without those items inside the box. They are now in my computer tool box. Overall I am satisfied with this tool. Other than the feel of the handle and the plastic clamshell material everything else is fine. It is a pretty good value. If I had to do it again, I would go for a slimmer shorter handle. When using this type of driver I usually use my index and middle finger tips and thumb. Because of the thickness of the handle, this isn’t as easily done as with other versions. The GT definitely has a better feel in that respect. The quality of the tool is fine. I had to remove some tight T6 Torx screws and this driver did the job without much effort and without destroying the bit. For that purpose, the larger handle was an advantage and the reason I kept it. But for the majority of the work I would use it for, the smaller thinner handle would be better.

This is the nicest precision screwdriver set I have ever purchased - and I have purchased several in the past. For the past few years I've had a craftsman set that has served me well until last weekend when I tried to open the battery compartment to my Garmin Heart Rate monitor. This set came with the perfect Phillips head to do the job with zero risk. I am very impressed with not only the selection of screw heads, but also the construction of the tool case. The screw heads are set in their holders so well that not a single one of them was loose in the package from shipping. I really love that at a push of the button, the entire try pops up to a 90 degree angle. I bought this set based on the vast selection of attachment heads and didn't pay any attention to all of the other great things that went into into packaging. I am very impressed. For the price, this is an outstanding purchase. I love it.

I picked this little set up just for servicing my folding knives. So far I couldn't be happier with it. It's had all the sizes I've needed, which is about 7 different tips at this point. Each has held up well for what I've put them through. No signs of wear at this point. The handles are nice and hold the tips securely with the help of the magnets. The only unfortunate part is they aren't magnetic at the tip so small screws don't stay secure without a little help. The storage box is nice and provides a nice kick up to the bits will stand straight, this helps taking them in and out when needed. All in all a good little kit that I would get again.

The tool and bit bed while made of cheap plastic does its job well and leaves room below it to store the plastic components. The case locks securely and is easy to open. The BLUE version also came with a flexible extender that allows for working in tight hard to reach places. Total added extension is about 10 inches, This set is a must for a handy person. It's hard to imagine any small electronic device that cannot be repaired with this set. I initially attempted to open my Nintendo 3DS XL with a rite-aid glasses repair screwdriver set I had laying around but they were all too big and didn't allow for enough torque. This set had the right sized bit. It also has a bit that is even smaller. The hexagonal bit also allowed me to relocate my fridge handle as well. Small, versatile and mighty. Good stuff.

Extremely impressed with this. I work as an electronics technician, and wanted a decent tool set for doing work on the side. The case this comes in is EXCELLENTLY designed, and you don't have to worry about bits falling out or getting mixed around. There is a convenient picture of the head of the bit and the size/type of bit below each one, which makes it easy to remember where to put each one if you take a few out. Other than the organization inside the case, the outside of the case and the latch isn't anything special. I'd argue that the quality of the latch is the biggest downfall of this kit. Also beware, the case itself only holds 56 bits. 63 is counting the screwdriver, two plastic pry tools, a bendy screwdriver extension, an electric drill bit piece, an additional philips head thrown in, and the extension for the screwdriver itself. Regardless, the quality of the bits is great, and the magnetic ability is great for small projects. This kit holds all the screwdrivers needed for all iPhone and other phone brand repairs, as well as Nintendo Switch, PS3/PS4 + controllers, Xbox 360/One + controllers, and much more. I should also note, this kit is a little bigger than I expected. It will not fit in your pocket by any means, but is still conveniently sized.