TV Cord Hider, 42in Cord Cover, Large Cable Hider, Wire Covers for 4 Cords, Cable Raceway Wire Hider, Wire Hiders for TV on Wall, Cable Cover Cord Concealer, W1.18in H0.6in, White

I recently decided to hang this TV, then realized that meant ugly cords hanging down. The best part is that the whole front cover slides up and down or pops off entirely, which makes it so easy to get the cords in after you have stuck this to the wall. I mean, I was finagling it behind the TV and dresser and for a second I thought it wasn't going to work, until I remembered that the front comes off. It's the best cord hider design I can even imagine! This comes with three pieces that will interlock if you need them to be longer, but I only used one section for this tv. My wall is already white so the white one blended in perfectly. It doesn't exactly make it disappear, but it's so much better than the black cords! I actually have wallpaper coming for this wall, so I'm going to see how peel-and-stick wallpaper does with it. And now I have two other sections for my other tvs. I am going to paint one of them for another room, because making them printable was genius! You can't beat the price!

This is a really nice solution to the age old problem of routing cables around baseboards. My home is a single story, but in parts of it, there are vaulted ceilings with no attic access. So, routing cables through walls is very difficult and would require cutting drywall to do. So, for years, any time I had to make a significant change to my networking gear, I'd have to bust out the hammer and loads of nail in baseboard clips to re-route all of my cabling. This left the baseboards chewed up and turned a simply cable swap into hours of fuss. Just recently, I switched to Fiber internet and had to redo my router and modem setup. I also opted for gigabit service, so I wanted to upgrade my ethernet cabling. I pulled apart my office and after routing everything and testing, found that I had defective or deficient cables. Rather than go through the motions of redoing the same thing once more, I decided to go with a more serviceable solution. Enter this product. First, I will admit that I didn't use their double-sided tape. Over the years, I have seen similar cable management solutions that used it, and it just never ends well. Inevitably the tape breaks down or you want to change something and you'll find yourself needing to replace the tape. So, I opted to instead screw each track piece in. It mapped out the path and tried to make it as simple as possible. Though drilling pilot holes and screwing in the base pieces was tedious, it wasn't difficult and once they're in place - they are highly serviceable. The covers snap off easily and snap back on just as simply. Within an hour, I had laid everything out and was busy running my cables through it. The actual product looks great when installed along the baseboards. It just kind of blends in, so I have no intension of painting it. The materials seem solid. I even stepped on one piece by accident, and rather than shattering, it just kind of bent and was easy to bend back. I'm pleased with the variety of included parts and the hardware options provided. It accommodates several cords running in parallel, with ease. I'm confident that if I need to change cabling in the future, it will be a breeze. I'm very pleased!

Absolutely love this product! I am not handy by any means and this was such a simple, easy solution to an eyesore of cords/cables on the floor. Would absolutely recommend for hiding any pesky cords. Installment was easy and I think they function great for what they are and I will definitely buy again (although I’ve bought two already 😜 ).

Perfect. Fit 3 HDMI, an optical cable and the TV power cable. No problems, looks great! Huge difference in appearance vs those ugly hanging (even bundled) cables.

Easy to use, install, and paint! Looks great, highly recommend! I painted it to match the accent wall in my office

Great for organizing sloppy wiring jobs. Installs in minutes with out tools but I do use a torpedo level to make sure they are straight.

Extremely easy to install. Hides unsightly cables from view. I painted it the same color of the wall.

Works well

I bought my first box of these and they sat a while. I guess I didn't believe they'd be as easy to use or as effective as they are. Once I finally decided to use them, I was impressed with the quality of the pieces and the variety of connectors that is included. I regret waiting because they really do improve the look of my space and keep things tidier. It's so much easier to vacuum with the cords off the floor and behind these covers. They're an easy and cheap way to improve your space. What most impressed me was that the pieces are sturdy and the covers stay on over the cables inside, but they're thin enough that I could use a staple gun to mount them on the wood baseboards in my old house. A staple an inch from either end and they're very secure. My old house has few outlets so there was cords running all over. I had a couple cords that ran behind heating radiators and I wanted to protect the cords from the heat, so it was easy to get the staple gun under the radiator and secure in place, then snap on the covers. Now I keep noticing spots with ugly, exposed cables and ordered my third box. I'd recommend them to renters 'cause they should be easy to remove, or cheap enough that you can leave them behind after you move and not feel you've wasted your money. I haven't used the included double-sided tape as I was applying them to wood mouldings 95% of the time. When I used some on a wall, I used the small included screws and anchors, pre-drilling a hole in the backside of the cover first. The plastic was easy to drill through and then I used that hole as a template to mark where on the wall the screw hole and anchor needed to be. Pic 1 - the coaxial cable for internet comes through a hole drilled in the baseboard and it looked terrible until I placed two pieces of the cover on either side and used this joining piece. There are cords for the TV surge protector and lamp hidden inside. Pic 2 - I have a Sonos speaker in the corner and this is the only outlet, so I have to run it behind the heating radiator. The cover protects the cord from melting, discoloring or from any water leaks from the radiator (as it has leaked in the past). Pic 3 - the dining room has this one outlet in the middle of the wall on one side of the room, so I have to run cables to either end of the room where I have lamps. Before these were on the floor and occasionally stepped on and hit by the vacuum. It's not perfect, but it's much better than when they were on the floor with dust bunnies between the cord and the wall.

Very good quality, and easy to use.

had a lot of cables to manage of different size and thickness. I was surprised that it worked so well. It makes the setup looks so much cleaner, it was an absolute breeze to install it took a quick minute then done. I PACKED the cable tube so I was sure it was gonna pop and not work cause I clearly overloaded but nope, this thing is so strong it held. It's been almost 3 months and it's still stuck to my wall strong. Very good buy, I would strongly recommend these.

Very easy to cut and mount. Looks good too.

This wire hiding system is nice and big enough to hide three cables easily I put a HDMI, a power cable and a network cable in with no problems. The package does not include and connecting pieces to attach the three strips together, when I went back to look, it was just the three strips advertised. It holds firmly to the wall, and looks fine. I have discovered that the cover to the strip is a bit easy to come off and just moving the wires can pop the cover off.