MD6401

I wanted a monitor stand where I could mount 2 x 27" monitors side by side. Having read some of the limitations of the dual monitor stands I decided to go with two single monitor stands as my desk is set against a wall and the dual stands bring the monitors too far forward. Firstly, the stand is very well built and simple enough to assemble. The only thing you need in addition to what comes in the box is a screwdriver for the VESA mount attachment to the screen. If you have any doubts about using the clamp option to mount it to the desk then don’t, it is heavy duty and large. Please keep in mind that you do need a decent overhang on the desk if you are using the clamp option to allow enough space for the clamp. The adjustment on the monitor once installed are good with good height and swivel adjustments but this is where my one slight gripe comes in. Once you have set your adjustments you have to tighten screws to keep it is place. This is a bit of a pain when the desk is against a wall and you are reaching over the top of large monitors. If like me you want to set two screens side by side then it takes quite a bit of fiddling around to get it right. Having said that once it is setup then its done. All in all very happy with the product and would recommend.

This monitor stand is really well made and feels sturdy. It holds my screen securely, and the swivel feature is a great addition—making it easy to adjust the monitor to the perfect angle. Setup was straightforward, and the overall build quality is impressive. I haven’t tested it with a heavier screen, but for my setup, it works perfectly. Definitely a great choice!

in my opinion this monitor arm is good quality and easy to assemble, however it shown to be a little bit of a problem when mounting. After i made sure everything was screwed in properly i thought it was good to go but when i left the monitor on the arm unattended for a couple of mins it fell, luckily not from great height and the problem was that the plate slid towards the front of the desk and it took a lot of strength to convert back to its intended position. All in all its a good and budget friendly monitor arm defo worth a try. 7 out of 10.

The Suptek Single Monitor Mount is solidly built and easy to install. It holds monitors securely, offers smooth tilt and swivel adjustments, and helps free up desk space. A practical and reliable solution for improving ergonomic setup.

Bought this as the previous one I had owned decided to break when I took my monitor off the clamp to clean my desk. One of the issues my old stand had was that the wrench tool they gave was too soft and ended up folding and not turning the screws. This stand also provides the same tool and is also thin and soft, but I was luckily able to twist the screws to make sure the monitor doesn't tilt. Yours may break, so keep note of that and try to be careful when tightening the screw. The hex keys they give are sturdy enough. My monitor apparently weighs 7kg without the stand, and this has managed to hold the weight and also the tilt angle. Again, the wrench tool they provide may not be strong enough to twist the screw that manages the tilt.

I got this because my desk is not very deep, and a mount that has a arm takes up to much space, but this is just perfect. The instructions this comes with are not good, lots of mislabeling for what screw is what, but the pictures on how to assemble where ok. Once it was assembled, its perfect nice and strong and holds my 24 inch acer monitor well, and there is good high adjustment. Overall I would recommend this if you don't have much desk space and want to save some, and I would definitely but this again.

DO NOT LISTEN TO BAD REVIEWS... this is absolutely incredible... I don't leave reviews normally but I had to on this it is so so sturdy. You just need to use a socket set and not the tools that come with and it will be absolutely solid trust me brilliant

Good for the money - strong and easy to assemble. My main criticism is that it uses 4 different allen key sizes and a bolt to adjust the height, angle, tilt, etc. This means that you need to keep all four allen keys and a spanner with the monitor in case you ever need to make an adjustment. It is also quite difficult to make fine adjustments to get it perfectly level. The matte paint finish also seems to mark quite easily, it has been scuffed just by sliding on the plastic cable clip, so could be better.

Montaje sencillo , altura regulable y ligero giro

J'ai acheté ce support de moniteur il y a quelques semaines, et je suis extrêmement satisfait de mon achat. Il mérite sans aucun doute cinq étoiles. Ce support est non seulement élégant, mais il est également incroyablement solide et bien construit. Il a complètement transformé mon espace de travail en me permettant de libérer de l'espace précieux sur mon bureau. Mon moniteur est désormais parfaitement ajusté à la hauteur et à l'angle qui me conviennent le mieux, ce qui a considérablement amélioré mon confort de travail. L'installation était simple et rapide, et j'apprécie le fait que le support soit livré avec toutes les pièces et les outils nécessaires. De plus, la gestion des câbles intégrée m'a permis de garder mon espace de travail bien organisé. La qualité de fabrication est impressionnante, et je suis convaincu que ce support me durera de nombreuses années. C'est un investissement que je recommande vivement à tous ceux qui cherchent à améliorer leur poste de travail. En résumé, ce support de moniteur est tout simplement exceptionnel. Il est fonctionnel, esthétique et durable. Si vous recherchez un moyen efficace d'optimiser votre espace de travail, ne cherchez pas plus loin. C'est un produit de haute qualité qui mérite pleinement ses cinq étoiles.

Inizio con quello che non mi é piaciuto, la confezione era aperta, fortunatamente non mancava nulla, purtroppo con questa modalità di consegna del lasciare la merce nell' androne e andar via, non si possono neanche contestare subito le eventuali criticità. Come già successomi di recente, con un oggetto arrivato rovinato e che ho dovute rendere indietro, continuo a vedere imballi, originali delle case, scadenti e che Amazon non provvede a rinforzare. L' oggetto l'ho appena assemblato, mi sembra ben curato e molto solido, tanti accessori per le varie modalità di fissaggio, ci sono anche gli attrezzi per il montaggio, il kit é totalmente autonomo, non serve altro per montarlo. L'ho comprato per il lavoro, domani lo metterò alla prova, ma non ho dubbi sulla sua solidità. 08/01/21 modifico il post perché, come dicevo sopra, l' ho montato sul posto di lavoro, é perfetto. L'ho montato alla scrivania con il morsetto, é ben stabile, il monitor si può girare comodamente, tutto ok. Ho visto dei post negativi con le fotografie, credo ci sia stato un problema di montaggio, io ho usato solo ciò che era nella confezione, e non ho trovato alcuna difficoltà, le istruzioni non spiegano gran chè, però è molto intuitivo, confrontando l' elenco dei pezzi sul foglio delle istruzioni, non mancava nulla e tutti i pezzi coincidevano, sarò stato fortunato?🙂

My WFH desk is not very big so I bought this to save some desk space. The arm seems sturdy and well built. It was easy to assemble, clamp to the desk and attach the monitor. The parts were are neatly packaged and well labeled. I appreciated that the instructions had actual words and not pictures.

Al principio dudé de la calidad del producto cuando estaba buscando opciones, al final decidí darle el beneficio de la duda, una vez que lo pedí llegó en menos tiempo de lo indicado, muy rápido el envío. Cuando me entrego la caja el personal de paquetería, lo sentí muy pesado, por lo que me dio confianza. Una vez que abrí el paquete, me di cuenta que los materiales son de muy buena calidad. Comencé a armarlo como se indican en las instrucciones, lo cual desde mi punto de vista hace falta marcar en la bolsa de tornillos como poder identificarlos mejor, no es complicado, pero tienes que fijarte muy bien y hacer el match contra el manual. Ya una vez instalado, se siente bastante sólido. Me elevó el monitor más de lo que imaginaba. Al no tener brazo, se tiene que aflojar un poco uno de los tornillos traseros para poder moverlo (si es que quieres que tenga algo de movilidad, en mi caso no es necesaria).