Single Monitor Arm Mount

Pros: What is there to say? There are pieces of metal machined to fit together. My expectations were extremely low for the price, but I was blown away in amazement. It's rigid enough to hold a monitor beyond its reported weight limit. All the weight is pushing down so moving it side to side is easy. I was concerned at first because the majority of crimping mounts had small clamps overtop. I installed this on a glass desk. Luckily the part in contact with the glass is big enough to spread the weight but not as so attract attention to itself. Included are clips for wire management that I found really useful. Almost Cons: The mount for the monitor itself works amazing. However, I have a curved monitor so part of it doesn't actually make contact with the monitor. Surprisingly, however, it has no effected anything nor does it shake whatsoever. The spacers included does a fairly well job of compensating the curve. If you have a monitor beyond a 24" with a curvature equivalent to the radius of a 1500mm circle, then get the monitor's corresponding mount. If you have a regular monitor, I heavy suggest this mount. Overall, this is a good product for day-to-day use.

The Suptek Single LED LCD Monitor Desk Mount is a high-quality, fully adjustable stand that supports monitors up to 27 inches, offering excellent stability and versatility. Its sturdy construction and easy installation make it a reliable choice, while its full range of motion helps improve ergonomics by reducing neck strain. The mount's space-saving design and built-in cable management system significantly declutter the workspace. However, users should ensure VESA compatibility and may need to spend some time adjusting the tension for optimal stability. Overall, it's a great investment for enhancing desk organization and comfort.

I held off buying this because I didn't want the look of another monitor at my living room desk. I can't imagine why I waited to long. It was easy to install and position. The parts are very sturdy. It came with the part to attach to the PC too.. All the right size allen wrenches came with it and there is even a little holder on the stem to keep each one of them handy, though I haven't needed to use them to retighten anything yet. I did have my husband tighten the bolt that holds the screen vertical as it wanted to sag and I couldn't get it tight enough myself. Easy to reposition the stem on my desk and it came with another type of attachment (that I didn't need) as well. There are clips on the arm and stem to hold the wires which is a thoughtful touch for wire management. There are a million ways to position your screen, higher, lower, closer or further back, tilted or not, angled any way you need.

I purchased this stand to mount a 22” monitor on my recording setup as space is limited and I wanted to be able to adjust the position of the monitor. It came with clear instructions and all hardware sorted in separate, numbered bag compartments so it was very easy to assemble. I am impressed with the robust steel construction, and all components are very strong and durable which I was not expecting for the reasonable price. The mounting clamp is excellent and easy to use with multiple adjustments to allow it to fasten to almost any thickness of desktop. The wire routing clips will accept wires of different types and thicknesses and keep the wires organized for a very clean appearance. I have positioned my monitor with the support arm extended about 12” center to center with the upright post which applies considerable leverage to the clamp, so I placed a small rectangular piece of MDF at that point to ensure that the clamp does not leave any indentation in the top of the work surface. Adjustment is easy, but it does require two Allen wrenches which can be misplaced, and I would prefer to have adjustment knobs which would be more convenient. I have a small computer module on the back of my monitor, but the overall size and weight are still in the range specified for this stand. However, I could not get the tilt adjustment to stay in position no matter how much I tightened it, as the tilt assembly has smooth washers between the yoke and the monitor holder which do not generate enough friction for the tilt adjustment to hold its position. To address this, I widened the yoke slightly in my workshop to make room for a toothed washer on either side as shown in the picture. With these washers in place, the tilt assembly works fine and holds the monitor in any position needed. Overall, I like this stand and I think it is very well-made for the price. If the tilt mechanism held fast with no modifications and adjustments did not require Allen wrenches, I would have given it a five-star rating.

The monitor stand is solid, flexible (several degrees of movement - monitor depth/rotation/elevation etc.). The stand was reasonably easy to assemble and the package came with all the tools except for a Philips screwdriver (which every household has, or should...). Like other reviewers mention, it can probably support a little more weight than is mentioned in the specifications, but to be safe, stay within the limits in the specifications. I have a 20 lb AOC monitor that it is currently supporting without any issues. The product is also minimal in design. It does what it needs to do without getting in the way and is elegant enough without being ostentatious and pricey. I was surprised about the value for money you are getting out of this neat product.

Excellent alloy quality holds my 24 inch monitor perfectly. The tilt and rangle of motion is awesome. Heavy and strong.

This is perfectly adequate. Sturdy, well made, i have no doubts that it will hold this 27" monitor. My biggest complaint is the size of the handle for the screw. If you have a limited overhang off the back of your desk, and the brace will be all the way under it, the "handle" for the tightening screw is too big and hits the desk making it almost impossible to fully tighten. Make the handle not extend past the edge of the clamp. Super simple fix.

Apres autant d'utilisation je le recommande a 200% car toujours en place et je bouge souvent mon écran.

Die Monitorhalterung von suptek, die ich kürzlich erhalten habe, hat mich wirklich beeindruckt. Schon beim Auspacken strahlte das Produkt eine beeindruckende Qualität aus. Die Konstruktion aus legiertem Stahl vermittelt sofort das Gefühl von Stabilität und Langlebigkeit – es ist offensichtlich, dass hier an nichts gespart wurde. Besonders die robuste Beschichtung fällt auf, die nicht nur äußerst angenehm anzufassen ist, sondern auch einen hochwertigen, fast edlen Eindruck hinterlässt. Sie sieht nicht nur gut aus, sondern scheint auch äußerst widerstandsfähig gegen Kratzer und Abnutzung zu sein. Nach der Installation war ich besonders begeistert von der Stabilität der Halterung. Egal, wie ich meinen Monitor drehe oder neige, die Halterung bleibt fest und wackelt kein bisschen. Die Möglichkeit, den Monitor in alle erdenklichen Positionen zu bringen, ist einfach fantastisch. Dank der 360°-Drehung und der großzügigen Neigungsoptionen konnte ich meinen Bildschirm perfekt an meine Sitzposition anpassen. Das macht das Arbeiten nicht nur ergonomischer, sondern auch viel angenehmer. Die Montage selbst war ein Kinderspiel. Alle benötigten Werkzeuge waren im Lieferumfang enthalten, und die Anleitungen waren klar und leicht verständlich. Die Option, zwischen der C-Klemme und der Tüllenmontage zu wählen, zeigt, dass der Hersteller wirklich an alles gedacht hat. Ich habe mich für die C-Klemme entschieden, die meinen Schreibtisch bombenfest umklammert, ohne dabei die Tischoberfläche zu beschädigen. Ein weiteres Highlight ist, wie viel Platz ich jetzt auf meinem Schreibtisch habe. Die Halterung hebt meinen Monitor von der Oberfläche weg, wodurch ich endlich mehr Raum für andere Dinge habe. Gleichzeitig sorgt die Kabelmanagement-Funktion dafür, dass keine störenden Kabel sichtbar sind, was meinem Arbeitsplatz ein aufgeräumtes, minimalistisches Aussehen verleiht. Zusammenfassend kann ich nur sagen: Diese Monitorhalterung ist ihr Geld absolut wert. Sie kombiniert eine extrem robuste Bauweise mit einer eleganten Ästhetik und durchdachten Funktionen. Ich bin begeistert und würde sie jedem empfehlen, der Wert auf Qualität und Funktionalität legt. Ein echtes Upgrade für jeden Arbeitsplatz!

Steady and great for filming but a bit bulky

EDIT #2 ya compré un 2ndo! Agregue fotos ya de los 2 brazos (editado para agregar más). Es mi primer brazo para monitor. Si me tardé en armarlo ya qu vienen para poder poner de 2 maneras diferentes, me puse a leer los instructivos a detalle y claro como iba sostener un monitor que acabo de comprar. Quería que estuviera bien instalado. Quería este brazo ALTO ya que iba poner un monitor de 22"en forma vertical (para leer documentos) [ver imagen]. Por ende tenía que tener mucha distancia (espacio) entre el escritorio y el monitor (o en mi caso más espacio entre el piso y el monitor). Para poder tener una trayectoria de la vista en un movimiento normal y no torcer hacia abajo (inclinación) para leer el documento. Este brazo mide 80cm de alto, si hubiera comprado uno normal de 40cm, me hubiera quedado muy abajo el monitor por lo mismo que tendría que forzar la vista hacia abajo cada vez que tenia que voltear al monitor.

Super easy to install. I was worried about putting it together - I am not very good at figuring things out. The instructions were in perfect english and perfectly clear and easy to follow. The arm itself is very sturdy. I am impressed actually how well built it is! Nothing on this looks cheap. Only down side I would say is that you need an included hex wrench to adjust the joints. Little bit of a pain, but you only really need to set it up once. you can leave a little tension on the screws and move it around without adjusting it every time. Still would be nice to have a hand tightening nut or something. This look sturdy enough to last for some time. If it does then this is a very good value for money.