HDEX80-KVM

I've been using this extender for about a week, and it’s been rock solid so far. I'm running it at 1080P@120Hz over about 100m of CAT6 cable to my gaming setup, and the image quality is crystal clear with zero lag. The 3 USB ports on the receiver side are super handy — I have my mouse, keyboard, and a USB headset plugged in, and they all respond instantly. Setting it up was straightforward — no drivers, just plug and play. I like that the power connectors lock in place, so nothing gets accidentally unplugged. Also tested it with my PS5 and Xbox, and both worked flawlessly. If you need to control your PC or console remotely with smooth, high refresh video and stable USB connections, this is a solid choice.

I've been having a medical issue/pain, which is preventing me from sitting in my office chair for more than a few minutes at a time. I'm a lifelong gamer, so not only was I having to work on my iPad, but I couldn't play any PC games. I got some super long cables and ran them across the house to connect my PC to the living room TV, but I don't like clutter and it started driving me nuts immediately. My husband fabricated an amazing monitor stand to go beside the couch, and I bought these delightful things (AV Access 4K HDMI USB KVM Extender). I hooked them up and they worked immediately! I have zero lag, and have played several games, including World of Warcraft and Aloft on Steam. Even my USB headset works for Zoom calls. There have been maybe two instances where they didn't work when I started the computer, but disconnecting the Ethernet cable and reconnecting it did the trick. It has not dropped while I'm actively using it. The entire ~40' run (from the first KVM to the wall jack, from the inside of the female-female office jack to the inside of the living room jack, from the living room jack to the second KVM) is CAT6 (https://www.amazon.com/dp/B07J6NJDRV).

Purchased the HDEX80-KVM. Was dead on arrival. USB worked correctly, however video through the HDMI did not. Tried both Cat5e and Cat6 cable, with no difference. Both test cables were less than 6' long. I noticed that the build quality seems cheap, and the components are very light and unsubstantial feeling. Incidentally, the module also seemed to run hot. this makes me concerned that even if it did work correctly, it may not last. Looks like i'll be looking elsewhere. ** Update 5/14/18** I spoke with a technician named Ryan, who contacted me hours after I sent an e-mail to tech support following the issues I had with the first module. He was extremely professional and quick to dispatch a second module which arrived a few days later. This one works! The USB seems to have little to no delay and the video at 1080P looks as good as though it were connected locally. I'm using cat6 cable at 50-ish feet with no problem. Also, the issue with the heat on the first module must have been due to the internal issue it had, as the working module does not have that issue. A couple of observations: 1) This will not pass a HDMI CEC signal. This is a niche requirement, and it was not stated to have it... My fault for net checking. 2) i would recommend applying the power to the Receiver module, as it seems to help with higher current draw USB devices. If you are using just a mouse and keyboard, then you should be fine connecting power on either end. Would recommend AV Access to anyone.

PAY ATTENTION: If you buy the doul monitor cover for your two monitors, DO ONT BUY, I WILL NOT WORK OR WILL BREAK SOON, this is very cheap product which for single monitor could do the job for you but once you plug two monitors it will keep going on and off to black screen as it shows how cheap the product is and no way it can handle two monitors,,. but once you plug our one of the monitors then it works,. it just simply is not what they advertized and they charge you for dual monitor where as it just works with one,. so save ur money either buy the single monitor or go with more expensive brand with decent quality

I used the setup to move my noisy PC to a different location, over 50 feet away, and enable local keyboard, mouse, and MIDI / USB Keyboard / Monitors - silence is golden - and it worked great. Periodically we have to restart the system, it would take a minute to re-sync as outlined in the documentation, however, it delivered as outlined in the documentation. As it runs over IP, I could now enable over our wireless wifi6/7 - and it worked great as outlined for 4k at 60hz - letting me move equipment and connect to various systems remotely. Moving your music / noisy system to another place than your working area allows for a quiet workplace - that the KVM could be connected to multiple remote systems is just another win. The quality of the unit, and clear directions, as well as AV Access not being a fly by night place, they've been around for a while, and supported this and other products, which didn't require complex setup, drivers, etc. it just worked. Note: start the unit closest to the PC first, then turn on the "receiver" the unit to which you plug in your USB devices, I put a 4 port hub on it (keyboard, mouse, sound system, Webcam, beyond using the 3 usb ports) and all worked through same USB to LAN/IP connection :) = finally yes, standard HMDI port worked great. Has DIP switches so you can put multiple units into play. I'd looked for a number of move the PC elsewhere - wireless KVM, wireless HDMI, with bluetooth - this just works ;) and if you are doing more than 1 system, it's really a no brainer. 我使用该设置将嘈杂的PC移动到50英尺以外的不同位置,并启用本地键盘,鼠标和MIDI / USB键盘/监视器-静音是金色的-效果很好。我们必须定期重新启动系统,如文档中所述,重新同步将需要一分钟,但是,它如文档中所述交付。当它通过IP运行时,我现在可以通过我们的无线wifi6 / 7启用-它的工作原理非常出色,适用于60hz的4k-让我移动设备并远程连接到各种系统。将音乐/嘈杂的系统移动到工作区域以外的其他地方,可以建立一个安静的工作场所-KVM可以连接到多个远程系统只是另一个胜利。单元的质量,清晰的方向以及AV Access并非夜间飞行的地方,它们已经存在了一段时间,并支持了此产品和其他产品,这些产品不需要复杂的设置,驱动程序等。它只是起作用了。注意:首先启动最接近PC的单元,然后打开“接收器”,将插入USB设备的单元打开,我在其上放置了4端口集线器（键盘,鼠标,声音系统,网络摄像头,而不是使用3个USB端口）,并且都通过相同的USB到LAN / IP连接工作:) =最后是的,标准HMDI端口效果很好。具有DIP开关,因此您可以玩多个单元。我曾寻找将PC移到其他地方的许多方法-无线KVM,无线HDMI和蓝牙-这行得通;)并且,如果您使用的是1个以上的系统,那确实很容易。

To start off I think it should be mentioned that this KVM extender does use a substantial amount of bandwidth. For me, I have a gigabit service coming into my house from my ISP so this KVM extender isn't really usable over a gigabit switch (displays are constantly flickering, input not working, etc.) The issue is that these KVM extenders each need almost an entire gigabit worth of bandwidth allocated from the transceiver to the receiver. After connecting all KVM extenders to my 10 gigabit switch everything has been working flawlessly at 1080p 144Hz. If you have having issues with your screens flickering or input not working, try connecting the transceiver and receiver together directly. If the problem goes away then your switch doesn't have enough switching bandwidth to support the KVMs. Most gigabit switches also support 1gbps Tx/Rx on each port at the same time, so if you are running into flickering issues run a dedicated cable from each KVM to your switch. Also if you are connecting switches to switches, the trunk connection will likely have to be 10gbps especially if you are running multiple KVMs. I would also recommend using higher quality ethernet cables with these. I was having issues with a 50 meter flat ethernet cable (supposed to be cat 6) like low frame rate and flickering. I swapped out the cable and its definitely back to 1080p 144Hz. If you want to have your PC in another room or in a server rack in your closet, this is a really really slick setup. If you have been trying to do LAN gaming and you've been disappointed by Parsec and SteamLink, give this a try.

I'm very impressed that it meets all of the functional requirements. First time, everything worked! Source: Mac Book Pro M2 with two USBC ports with cables for the 2 HDMI cables and the USB connection Network: 82' Cat 7 cable Receiver: HDMI 1: HDMI to VGA converter with Audio connecting to a KVM switch which shows on a 1080p monitor. I was able to switch between devices and experience no problems reconnecting to the remote machine (unlike other KVM Extenders I've tried). HDMI 2: HDMI to VGA cable with audio connecting to a 1080p monitor. Video and sounds works great! USB1: Connects to KVM USB switch for remote keyboard/mouse operation. Zero Lag! Huge win! USB2: Connects to an iPhone for software development. My Mac & Xcode connected with no problems. No loss of connection for debugging code, etc. USB3: 2nd mouse. USB4: I tried both a Logitech webcam (audio/video) and a HyperX Solocast microphone and both worked without problems. The microphone's better sound quality persisted. I have yet to test using USB3 to connect to the microphone and the USB4 to the webcam (video only) and verify I can use both devices in a virtual meeting. I've used this setup for about 4 hours now. Everything worked - No lag. No issues reconnecting. No video flashing or loss of quality (that I can tell). I maxed out what this product says it could do and it performed.

Works amazing, I can run two screens and all my USB devices at 100+ feet exactly as advertised. Except I can see very distinct image defects. Easiest to see around static text/icons against a solid color background. Its not unusable quality but its visually jarring when I have a monitor right next to it displaying at perfect quality. When I contacted support to see if this was expected behavior I got something like "must be the display chip, nothing we can do for you, we will let our chip supplier know of the issue." I suspect it just has lossy compression and they hope most people don't notice. In the screenshot the top is the quality via this KVM, bottom is normal cable. It obviously doesn't show up in screenshots and is hard to see in photos so the left has increased contrast to show the artifacts around the icons.