Replacement Parts for Shark AI AV2501S AV2501AE RV2502AE RV2520AOUS AV2510AOUS AV2511AE RV2610WA RV2610WD Accessories Kit with Main Roller Brush Filters Foam/Primary Filter Sweep Side Brushes

This is an all-in-one kit for a group of different models, so not all parts will work with all models. For my AI (don't have the exact mode #, but I bought it from Costco), that meant the black filters are useless, but I believe every other part will work. I bought this kit because our model is around 1.5 years old, and I keep getting "dust bin not installed" or similar errors. From experience, I find these are usually related to a clogged filter, or rather the base tries to suck the debris out of the vacuum unit, and senses a low pressure differential which it then INTERPRETS as something not being installed. This is particularly frustrating when you're trying to solve a problem! I was also getting a fair amount of the vacuum "flap" on the vacuum unit being propped open with small debris that should otherwise be cleared out - that was also a signal that the base just didn't have the ability to empty the vacuum unit. All this said, there are a few filters in the unit which you need to clean regularly depending on what you have in your home. For us with a husky, that means cleaning things a couple times a week. Don't forget the filter in the base unit that's under a cover on the top left side! At any rate, our unit was getting tired - in addition to the filters, the beater bar was also..... beat. The bars in this kit fit just fine, and I anticipate that the unit will clean better, as our old beater bar was so worn I doubt it really brushed the floor like it should. For the cost I think this is a great value.

These parts worked great with my shark! ! All the parts worked perfectly. The brush on mine had fallen off and the robot wasn’t working. The brush in the pack did the trick! My robot is working again!

Love having replacement parts!! They are compatible, and the quality matches the existing ones

The entire kit was great and works well. Easy to change filters. Great value. Minus 1 star for the brush rollers that tend to bind on themselves. I am actually addressing stuck roller issues much more now than before.

With three dogs, these replacement parts come in really handy for my Shark robot vac. They help keep everything running smoothly, and the installation is super easy. I did have one of the replacement brush rollers break already, so the durability—since they are not OEM—is still up for debate. But honestly, I would still buy the set again because the price is great and the rest of the parts have held up well. Maybe I just got a bad roller, because the second one has been perfectly fine. With everything included, this set should keep me stocked for about a year.

Until my robot got completely choked up I had no idea this 'system' had all these filters. That's when I discovered this 'kit' (which arrived quickly). Once armed with it I set out to find these various parts. If memory is correct there are two filters in the robot and four filters in the base. I also found out each filter can be cleaned under water so I've done that, then allowed them to dry - for future re-use. EDIT IN: I've seen some people claiming their roller quit on them, as did mine 2-3 days ago. I found that each end was tightly wrapped with dog hair. Easy to clean one end, I had to pry the plastic 'bearing' aside to dig out the other end. Returned to service without a problem. In a separate order I've ordered a replacement battery - as it's a 30 day wait (coming from China) I suggest you order one Before your robot dies. Note: within its 2 months life my robot has died three times - unable to return to the dock. In fairness that may have been related to its struggling to operate while the filters were slam plugged.

I purchased this product primarily for the roller as the original one quit working after roughly 1 year (that’s another story). First some information about troubleshooting the Shark vacuum. The roller somehow communicates with the vacuum and will signal that there is an obstruction under the unit. The unit shuts down. It can be due to the roller getting tangled up. But if you clear it and it still gives you the message, your next step is to remove the roller and see if the vacuum runs without shutting off. If it does the roller is bad and must be replaced. (Shark’s customer service was outstanding) Back to the product at hand. It was relatively inexpensive compared to the Shark brand replacement. I inserted the replacement roller that came in this kit. It worked. Yay!! But a month later the replacement roller went bad. Fortunately the kit came with 2 rollers. I am using the Second while I wait for an official Shark brand roller. Maybe this kit is a lesson in “you get what you pay for-if that” 30 days to failure is totally unacceptable. I haven’t used the other parts in the kit and they be fine, but those parts will not prevent the vacuum from working. Thus the roller is a critical piece and it’s extremely short life makes this product a poor buy. Thus the rating is beyond poor and worthy of only one star.

These parts fit perfectly and it's nice to have extras to rotate thru while the other parts are getting cleaned

I have been looking for replacement parts for my Shark AI robot vacuum since I got it. This kit is great, replaced all the parts that came with the kit, everything fit perfectly. The round Foam filter is slightly shorter, but it still works just as well. The Main brushroller sounds quiet and the vaccum ran one cycle with no issues. Will be ordering these replacement parts again when needed!

Product is good and worked as expected. It fit my shark ai vaccum perfectly. Will recommend to anyone looking for replacement spares

Everything was a direct fit replacement. Several months on now, I feel that the brush rollers are wearing out/tearing faster than the OEM. But and this price, I can replace them earlier and still be ahead. They clean fine.

Needed some replacement filters for our Shark AI. The filters fit perfectly and the vacuum is running like new again! However the brush roll seems rather tight. Update: I had to remove the brush roller as it created too much friction from improper fit. It was draining the battery and getting stuck a lot. Purchased a separate replacement brush roll from a different manufacturer and it works well.

ok