Proxicast J-Max Pivot/Lock Antenna Mount Pole, Stainless Steel, 1.5"x18"

This J-mount was very easy to assemble and worked perfectly for my Starlink Standard here in Kingston, Jamaica. The mount feels very secure and solid once installed, and I have full confidence in its stability. It mounted easily to the top of a concrete wall and offers excellent value for the price. The weight strikes a great balance heavy enough to feel strong and durable, but not so heavy that it’s difficult to handle or install on your own. I would definitely recommend this mount.

Bought this to mount my access point on my pole bard to extend my outside Wi Fi coverage. I hard wire a UniFIi AC Pro on just above my peak roof line and the outdoor coverage is is unbelievable! I am amazed and very happy I went through the trouble of doing it. Should have done it 4 years earlier. Solid mount, Stainless steel very good quality.

This is a very high quality item. I am using it to mount my Davis Instruments weather station. It is fully adjustable and very stable. Just what I needed.

I have a new gen3 starlink dish. Its well known that up until May2024 that the starlink pipe adaptor is garbage. So I needed to improvise. Proxicast has been wildly popular with early generation starlink dishes. I have one of the OAM starlink wall mounts, but the extension pipe is MUCH MUCH to short. The advantage of the OAM wall mount is a very firm connection to the dish itself. So comes in the improvise. Use the proxicast J mount to provide the extension. a standard well made u-bolt pipe adaptor clamp, and the OAM stalink pole/mount. As show in one photo is all three together. install on a facia of a steep metal roof comes next week. Pros: - high quality material - all nuts and bolts included - clear install instructions - pipe diameter is perfect fit (with a couple wraps of duct tape to fit snug) with starlink pole mount Cons: - with this kit, none - with proxicast in general, I wish they had a gen3 starlink pipe adaptor

I really like this unit, the stainless construction will last forever. I like how it is taller than most similar units to clear the eaves better and it is fairly priced for what you get. The reason for the 4 star is the square hole on the bracket for the main pivot bolt it a bit to large. It allows the carriage bolt to spin if you don’t hold it, or a thicker bolt for that hole should be provided.

I ordered this antenna mount to install an outdoor PoE mesh network access point for my Starlink service. I was looking for a sturdy mount that would hold to the weather. The Proxicast Pro-Grade J-Max 100% Solid Stainless Steel Antenna Mount more than filled the task. I chose the stainless steel mount over the aluminum since it was only a few dollars more. Also, I wanted to increase the height of the mast by adding additional tubing, so the stainless steel should be able to carry any extra weight easily. The mount was straightforward to install. After installing the base support to the wall, there are only 4 bolts to insert and tighten. However, a couple of the base's mounting holes are directly behind the J arm. If you want to use these, you may have to assemble the unit in place rather than on the ground. The two small bolts holding the arm have to be slid in from the inside to the J arm tube. It was tricky holding the bolt inside the tube to line it up with the provided hole while standing on a ladder. I have vinyl siding, so I wanted to use the facia board on the soffit. The base support is a bit large (over 7 inches) and my facia boards are not that wide. I wound up using a front corner that gave me more surface area. Since I wanted to add to the mast height by a few feet, I used 1-inch PVC schedule 40 pipe. That size was almost perfect and slid fairly snuggly into the Proxicast J arm. I inserted the PVC pipe to the bend in the J-arm and added a few feet of length. I used 2 additional 1/4-inch bolts to secure the pipe. All in all, a very solid installation.

good product, easy to install.

I bought this mount in order to mount my starlink dishy near the peak of my house and get it above the roofline so it can rotate or stow without hitting the house. It fit the starlink base perfectly, and to be clear I got the stainless arm model. The listing says the stainless and aluminum arm models have the same ID/OD, but I don't totally trust that. The locking bolt is a great feature that ensures wind or snow loads can't force the arm angle to change. Its helpful to leave the locking bolt out at first until the dishy is secured, so you can have the arm horizontal as you work on it, letting you reach the end from below the roofline, then swing it up on its hinge bolt to above the roofline before installing the locking bolt. I used the winegard starlink adapter to clamp the dishy to the arm without any modifications. The actual mounting bracket for this could be made from a heavier gauge of stainless in my opinion but is probably fine for its purpose. I'd guess it's 14 gauge, and I'd prefer to see 11 gauge. Be sure to reinforce behind wherever you mount this if you can, and aren't mounting to something structural. I would not dare use the included bolts to mount this to sheathing, siding or fascia. The arm is too long and the wind will have too much leverage. I ran a 2x10 behind it in my attic, screwed to the truss, and then drilled through the side of the house and the 2x10 and through-bolted the bracket. Make sure to use some caulk to waterproof any holes you have to drill. I drilled a large hole (originally in the wrong spot) to pass the router end of the dishy cable through. I'll be using a grommet and some silicone to make a more formal pass through once the grommet arrives.

I sent this up from my Starlink dish. I added the extension that you can buy works great I haven’t had a problem. Need clean, stainless steel no issues.

El soporte quedó perfecto para la antena Starlink. Lo instalé en pared en un ambiente cercano a la costa, porque el primero que instalé hace un año no era de acero inoxidable y se oxidó muy rápido. Espero que esta me dure varios años.

I was impressed with the quality of the mount and how easily we were able to set it up with our Starlink system. Would highly recommend this mount.

Muy bien excelente muy rápido internet 300 mgas

Worked perfectly for me - a Starlink antenna install. Decent gauge SS.