300g

This Resin worked great for my crafts. Love how easy it is to clean and use. I had no trouble drying it. It was easy to use and great durability. The bottle size was a great size and thickness was great. Love that it was clear in color.

I make small batches of one-of-a-kind jewelry pieces and accessories. This resin is perfect for that. It cures very well under UV light. This is a great resin for beginners! Very easy to use, it is very clear, and has very little air bubbles. Here are some tips and tricks for those of you just getting started with UV resin and to make sure you get the best results: Make sure you are using a transparent mold and cure from both sides. I do not recommend using any opaque molds. (Opaque molds are typically the pink or blue ones you see at here on Amazon, but they can come in other colors too.) There are a ton of transparent molds here on Amazon, just search for “UV Resin Mold” specifically. A majority of the molds I use have come from here. They will be clear to milky white, but clear enough for light to go through one side to the other. If you don’t use transparent molds, you will not be able to cure from both sides, and will have issues with your pieces fully curing. I also spray my molds with 91% rubbing alcohol, which helps to cut down on micro bubbles significantly. I also lightly mist 91% rubbing alcohol over the top once I have cast my molds to further rid my casts of any additional micro-bubbles, and then use a heat gun over the top for any stubborn bubbles, if there are any. (Note: Do not use a lighter over the top for bubbles if you spray them with alcohol!) Also, make sure you don’t spray too much alcohol, or it may take longer to cure under the UV light. My thickest pieces are typically less than a quarter inch thick, so curing time can vary from 2 to 5 minutes, depending on the density of mix-ins along with the thickness of the mold, and how many times I cure both front & back. Once I de-mold my pieces, I cure them on both sides under the UV light one more time to make sure they have cured all the way through. Speaking of mix-ins, make sure you are not using opaque dyes, mica powders, or too much opaque glitter. If light can’t get through the piece, it will not cure. I typically use transparent dyes along with glitter that is transparent polyester (no metal). It’s OK to throw a few little pieces that are not transparent into the mix, the key is making sure the mix isn’t entirely made up of opaque items or opaque dyes, otherwise, your items will not cure in the middle and turn out soft or “bendy”. I prefer UV resin over traditional resin, because I have such a small work area, and work with small items and small batches. UV resin makes it a lot easier for me to get through everything in one shot, rather than having to find a place for everything to sit while I wait 24 to 48 hours for everything to cure before I can de-mold. (Instant gratification!!) No resin is ever fume free, but the fumes from this resin is very light compared to others I have used. It smells very similar to a nail salon that does gel nails & acrylics. I highly recommend using in a well-ventilated area, using a respirator, and wearing gloves. Due to some of my pieces being extra small and needing precision, admittedly, I sometimes go without gloves, but I work right next to a sink and I am constantly washing my hands as soon as anything gets on them. I would not recommend UV resin for doing thicker pieces such as pyramids or larger clear orbs, pieces such as trays or boxes, or items with deeper molds. 2-part resin would work best for these. (And would be more cost-effective.) For jewelry pieces, key rings, hair clips, and other small items in smaller quantities, it is an excellent resin! I have tried many other resin brands, and this resin gets top marks for curing, clarity, and price! I hope this review helps some you just getting started with UV resin. Happy creating!

this uv resin is a frequent buy for me. I make badge reels for customers. after a full month of having my own badge reel, there are still no scratches on the surface. It has a great glossy look to it, can be used with HTVRont sticker paper and inkjet print work. It does not go as far as Lets Resin Brand, but I feel it is better quality and a still a cheaper price. With Let's resin, I can get about 30 coats out of 1 bottle, with this I get around 20, 15 if I don't warm it up before use. the badge reels are usually 2x2 in at most and it does need to be warmed, otherwise, due to temperatures in my basements, the shine shows ripples, flat ripples. So, anyone who uses uv resin knows that it has to be a proper temperature in order to use it right. Five stars. Cure time is great, within 2 or 3 minutes as it states is true, the hardness is great. For the price, the size is consistent to its competitors.

I have just begun to use this and so far I am liking it. Flows nicely, low bubbles and once cured they seem nice and clear. It did take me a bit longer than I am used to for curing but I can't tell if that is the resin or my Lamp.

Awesome product! Very easy to use. Lots of work time. Will not harden until you cure it with UV lamp or sunlight. I work with it in a limited sunlight room. I have used it to 1) pour into molds for jewelry. (You have to cure it on 1 side then flip the mold and cure it on the other. Do NOT recommend for making Jewely with a solid back like a metal tray etc. since you cannot cure the back side with UV so it will not cure. However, works great to seal the top of the piece of jewelry, to dome it, or add top embellishments. You CAN use it in trays, etc. IF you pour and cure it in LAYERS!! Then it works GREAT!) 2) Used it to seal both vertical and horizontal planes of dioramas. (Is a bit this so I use a paintbrush in thin layers. Works great!) Super clear with very few bubbles, VERY LOW ODOR(I have asthma, and this causes me no issues), suer fast shipping and great price|! Overall, an awesome product at a great value!

I have been using this epoxy on my earrings for about a year now. A couple of things I've noticed Overall it's a good epoxy. -Thicker so it doesn't run off the edges quickly (although it still will if you do a really thick layer). -It hasn't been yellowing in the sun or over time like other epoxy's I've used, which is HUGE. -Smell is not bad, although when you hit it with a flame it does release an odor. -Easy to work with, a lot of bang for your buck. Issues to be aware of: -I've noticed that over time it gets dirty, so I have to polish my earrings every so often to remove the layer of oil/dirt the epoxy holds. It's strange. -I have noticed that if I put the epoxy directly under a UV light, it will cause bubbles. So I started placing the epoxy around the UV light, so the light hits it but is not directly under and this has seemed to help harden it enough to prevent the bubbles. Then I place the earrings in direct sunlight for an hour and have not noticed any issues with tackiness.

This is the first UV resin I’ve bought. So I can’t compare it to any other brand. I will say, it met my expectations and is very easy to use. It does some pulling away from the edges when doming baked polymer clay. But since I’ve learned a technique that keeps it from doing that. It’ll also pull away when you take a lighter to it to pop the bubbles. This is a pro as it helps me to know whether I have applied a thick enough layer to whatever I’m coating. When doing deep bezels, it’s best to apply in layers as it cures better in thinner layers. Considering it’s UV resin, this mild inconvenience still makes it easier to use than standard resin. It’s clear from pour to cure. If you haven’t cured it properly, fingerprints will cloud the resin. Another properly cured thin coat fixes this issue. When using clear molds, it likes to climb up the walls of the mold (meniscus) creating a dent in the top side. Just dome the resin after removing it from the mold and you’re good to go. I don’t recommend sanding. It’s a pain. Though you can, just apply a thin coat to get rid of the frosted glass look, unless you like it. Add to a black fine tipped bottle for use in small areas or prep a piece of baked clay that’s going to be domed. This bottle lasts months with moderate use. I make jewelry (pics) and eyes for air dry clay sculptures, so it’s taking me awhile to get through this bottle. Larger projects will take more resin and may make the bottle last a shorter time. I bought more so I can make a full rune set. Oh, 1 last thing, it takes mica and resin dye very well, even the opaque black and white. Just be mindful of thin layers. Clean up can be done with alcohol or Clorox wipes. I like the coconut ones. ☺️

This is the best resin I’ve ever used. It’s very easy to use, takes hardly no time to cure, and it lasts for so long. Out of all the UV resin that I’ve tried, this one blows them all out of the water. I’ve mixed in all types of glitter and dies, and it still dries perfect. This is the best quality resin. I’ve used in a long time.

W polowaniu w którym miały być 3 sztuk znajdowały się tylko 2, nie zgodnie z opisem

Very nice resin. Cures hard and crystal clear. I run a small art business on Etsy - JulieMurrayArt - and I use this resin to create my signature northern lights pendants. It cures beautifully and I have never had an issues with this resin. Great product!

Je suis contente de les avoir eu par 3 car s'est pas facile de trouver en grande quantité

Ho deciso di provare questa resina UV per i miei progetti fai-da-te, in particolare per smaltare dei piccoli progetti in ceramica. Una delle caratteristiche migliori di questa resina è l'indurimento veloce sotto luce UV. Dopo solo pochi minuti di esposizione alla lampada UV, la resina si indurisce perfettamente. La resina ha una finitura lucida e cristallina che rende le creazioni brillanti e con un aspetto professionale. La consistenza è perfetta, non troppo densa, e si spalma con un pennello con facilità. Un altro punto a favore è che l'odore della resina durante l'utilizzo è molto contenuto rispetto ad altre resine che ho provato. Non è fastidioso e non rimane nell'ambiente, il che rende l'esperienza di lavoro molto più piacevole. Consigliato.

J’adore cette résine UV par contre j’ai reçu le bidon de 1kg sans les tapis alors que c’est bien noté AVEC tapis… et j’aurais aimé pour 60€ les recevoir !!