Abr-1 Style Tune-o-matic Bridge Tailpiece Roller Saddle Bridge for Gibson Les Paul Gear Replacement (Black)

At first I was disappointed because the bridge would not fit on the stock Gibson posts of my LP Studio, once I unscrewed the posts from the anchors, I found the supplied posts threads to match perfectly. I didn't have to change out the posts for my LP Standard, the bridge slipped over them just fine. The bridge is a bit taller than the stock one, so I recommend starting lower than you usually do and adjusting from there. I was a bit skeptical about getting a wrench past the string for intonation (the strings pass over the adjustment screw), but it was easy to just push the string over slightly to access the setscrew. Only critique I have is that all the rollers are the same width, which means the thinner strings can float back & forth a bit on the roller. That can be good or bad, depending on how you look at it, I'd prefer them to be varying sizes. Overall, great bridge. Rollers help a lot with a Bigsby, and something about this bridge is better than the stock one in sound. Much more resonant - the strings jangle when the guitar is unplugged. It's very nice. I tried several other bridges and found them to be import sized, not USA size (whatever that is). This one fit perfectly on my 2019 Gibson Les Paul Studio and my 2012 Les Paul Standard. Best of luck

Flexibility in design allowed for unique implementation. To modify the bridge on my SG to fit a 25.5 scale length, I was able to file down one side of this bridge and attach using some offset screws. Overall moved bridge 0.5in up the body without drilling new holes. Prefer this to other roller bridges. Strings won't slip off the saddles. The rollers themselves seem to do a better job of NOT moving up/down as you strum which would cause a need to mute the strings between it and the stop bar. That said, the high end strings do move within the groove during use, but maybe I need to swap the saddles around. May have gotten them mixed up, not sure. Side note, if you do this, don't mix and match saddles from other similar bridges. The gold saddles in the photo were smaller and resulted in worse placement. Close up is to show where the filing was needed for the custom install. Top saddle is braced on pickup plate which provides stability to the whole thing. Lastly, the metal is high-quality because the saddles didn't chip under pressure like the gold ones did. The hand-filing took like 30 minutes too! haha

Seems to be a good quality bridge and tailpiece. The bridge uses ABR style posts, not the larger Nashville one so make sure you have the right posts before ordering. The holes for the posts are a little tight, but it fits. Very adjustable with various hex-screws. I will update my review once I finish the guitar, but it feels like a good quality product. Certainly better than came on my cheap guitar.

Looks great on the guitar work perfect.

This says it fits a Gibson Les Paul Standard , it does not . The posts for the tail piece do not fit holes and the Bridge is a cheap knock off of the original. I will be returning

The bridge on my Les Paul was incorrectly placed too far away from the pickups. This bridge allowed me to move the bridge closer to the pickups which solved my problem with intonation. But, honestly, I was shocked how this bridge sounds in my Les Paul. Sustain, tone and resonance is unbelievable good. I am a big fan of brass and it’s effect on tone. So maybe the brass saddles are making the main difference tonewise. As far as I know this bridge is made in China? And things that come out of China aren’t particularly known for being high quality. All I can say is I love the effect this bridge has on my tone. Before the change this Les Paul was not a guitar I connected with. After the bridge install this gtr has become one of my favorite guitars! Great Value!

Few Problems.. USA Gibson SG. The threads for tailpiece inserts / tail piece Post bolts are 5/16-24. The Wood Tail Piece Inserts and Tail Piece Bolts that come with the kit are Metric! M8. However, The Saddle Posts are in fact Standard. The other Problem is the Inserts that come with the Kit are too skinny. 1/16” difference in Diameter. Do NOT attempt to use them they will wreck the finish and blow out the wood or worse. (Strings under Tension is approximately 200lbs!!) I simply re-Threaded the Tail Piece Post Bolts to 5/15-24 and reused factory GIBSON inserts.

Everything fits the Epiphone SG except the roller saddle mounts for the original SG are to big for the provided screws. I remedied this problem by removing the screws and applying Gorilla Glue between the old mounts and the ones that came with this. Then put the screws back in the new mounts. Now I'm happily converted from chrome to black hardware on the cheap.

Il prodotto è arrivato nei tempi prestabiliti anzi con qualche giorno di anticipo, senza alcun difetto, buona la cromatura, le regolazioni si devono fare con la chiavetta a brugola.

It worked really Good

El puente no corresponde con las fotogafias. Es de tipo roller y no de selletas. Trataré de colocarlo a ver si no me da problemas. Cuando lo compreis aseguraros bien que es el de la foto.

Cet article convient parfaitement à ma Lespaul custom Harley Benton.

Schnell geliefert, super Qualität. Habe schon mehrere Produkte von musiclily bestellt und bin begeistert.