The technical answer is our products are not food-safe. Although we are currently working on getting our epoxies tested and certified for food-safe uses. All our products are as safe as epoxy can be for food contact but are not FDA compliant as they don’t offer this approval anymore to any products containing BPA. To put this into perspective, there’s less BPA’s in our products once cured than what’s in plastic drinking bottles but it does have a small percentage that is worth keeping in mind. It’s safe for incidental food contact but not recommended for anything where an alcoholic beverage or anything that can be a solvent is introduced. My advice would be to use them without worry about anything that dry food is going to be placed on (apples, meats, cheese, etc..) but if there’s something like a beverage or a wet food such as a sliced orange or similar product then I’d avoid that. You can also coat it with a food-safe oil or wax, you can also use a polyurethane finish which won't wear as fast as an oil or wax finish will. but you have to allow it to fully cure before it is considered food-safe, The rule of thumb for full curing is 30 days at room temperature (65- to 75- degrees F). then you can be 100% worry-free with your project.

does it yellow over time?

I haven’t had it long enough but I really don’t think so only thing like that I came across was I made a huge bar top in kinda a dusty basement so my last laying was a little foggy

what is the mixing ratio?

2 parts resin, 1 part hardener. By volume. The 60L kits includes 40L of resin and 20L of hardener.

Is it better to use liquid or powder tint with flowcast when pouring a river type table?

That's a good question. Both have merits. In our shop, we personally prefer metallic powders from EcoPoxy due to the depth of figure that transpires during the cure and the ability to create a wide range of shades by mixing various powdered pigments. Powders allow more freedom to adjust the degree of transparency that you are seeking as well. Metallic powders also reflect light, again giving more interest in the final product. Liquids are relatively easy to work with, but there is less variety in the liquid pigments for color and they tend have a higher opacity (e.g. less see-through) final product. They don't give you the same "swirl" effect that metallic powders due in the final cure. That can be a positive, depending on the end result you're looking for. They blend well into the resin/hardener mix and have less risk of pigment clusters, which sometimes occur with pigment powders (though that tends to be negligible and not usually an aesthetic issue). Both work well, and it's a matter of preference. Powders = generally more variety in color and transparency options and more figure/swirl in the finished product. Liquids = consistency, easier to achieve opacity (no transparency) and less figure and swirl if that is what you desire.

Desertcart Logo

We remain fully operational. Our teams are working around the clock to ensure your deliveries continue safely.

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan

Customer Services

About Us

Customer Support

Our Other Brands:Hewyn|Selfship

Reviews

S**M

Unable to open Part A!!!

I'm excited to use the product! Read great reviews.. I ordered it and opened part B,, and then tried to open Part A but wasn't able to! Help!!!

26.06.2022

A**R

This product is amazing! (I am a DYI enthusiast not a pro) When you see people explain that there is a long curing time - it is correct; it’s not a fast cure by design(self levelling). To be able to rest anything on it without making an indent I safely had to wait minimum five days. That’s said - If you do any research into the different kinds of epoxy; this epoxy is designed for deep pour. It is far more viscous and therefore takes a lot longer to cure; but it will give you amazing results. The packages come with everything you need to be able to mix it together. If you have a large quantity then proper tools such as an Epoxy mixer would be recommended. **** Do not underestimate the amount you will need. I read the calculations and tried to figure out that I probably would be OK with 6 L. Given the project I ended up eating 12. But it was completely worth it for the end result. A word of caution - take a look at the material you’re using/pouring it on to. This is because with how viscous this is; even MDF (less than 1/4 inch untreated) will have some soak through. Overall I made four purchases of this product to get the exact level that I wanted and I don’t regret a single one. Well worth the money!

4.02.2022

T**R

Takes forever to dry but it works very well. Use the faster drying one if you are using powdered dyes

28.01.2025

A**A

Very nice product

24.12.2025

T**S

Ecopoxy is a quality product. Used many times. Thank you.

6.02.2024

D**E

Bon produit Temps de livraison non respecter même avec livraison accéléré

23.12.2025

ASIN	B0829T7Y5D
Item model number	FlowCast 1.59 Gal / 6L - EPFLK10-6L
Manufacturer	EcoPoxy Inc.

EcoPoxy FlowCast Deep Pour Epoxy Resin Kit - 1.59 Gal / 6L: UV/Yellowing Resistant, Bio-Based Resin | Water Clear Epoxy for River/Ocean Tables and Other Deep Casting Bubble Free Epoxy Projects

Details

Description

Specifications

Reviews

Common Questions