Attachments Holder for Dyson,Mount Organizer Tools Accessories Holder for Dyson GEN5 GEN 5 V15 V12 V11 V10 V8 V7 Vacuum Cleaner Docking Station

Finally, I found an wall mount accessories holder for my DYSON V12. The round mounts have a notch to allow powered accessory connector to fit nicely. In theory you can have 5 accessories on each side, so 10 total. But in my case, I was near a wall so I couldn't fit the large laser slim fluffy cleaner head, and the smaller hair screw tool can fit only on one side, i.e., you can turn it around because of the way it is shaped it hits the wall. Of course, the crevice. combination tool and my new dusting brush will fit in any mount. You can spin the mount to have the red button in front or behind. I didn't use the included screws/anchor. I prefer to use the self-drilling drywall anchors made of zinc #8, can support 75lbs. easier to install, no drilling, sturdier. Overall, I'm happy with my purchase, I would recommend this support for any DYSON. but if you look for a V12 compatible support, this is the one.

I installed these in about an hour after I received them. My power plug had enough space on both sides for the attachment holder. I just had to assemble them, click them into the attachment holders on the power plug, mark the wall for the location to drill the holes, drill the holes, put in the plastic anchors (small hammer helps), click them back into the plug attachment holder and screw them in. With them screwed in the mount is really much more sold that without them. Now I have all my attachments where I can find them easily and I have four vacuum heads and they all can fit. I still have a bag with my extra canister and filters that I hang from a hook just below, but this was a great find for me.

Like the design, like the option to mount separately or directly to Dyson charger. I feel the brush holders could’ve been spaced a bit better, the slim stuff barely has enough room side by side. The holders without the button catches are VERY snug, which is annoying, but as long as you don’t push pieces tightly into them they work fine. All my Dyson V15 pieces worked on the mounts, the smaller anti tangle head however needed to be mounted backwards to give it enough space.Overall I’m happy with the purchase.

This is epic. Has been life changing in our tiny storage and laundry room.

I recently purchased the holy grail of Dyson cordless vacuum cleaners, AKA the V15 Detect, along with the Floor Dok so I didn't have to drill holes into my wall. Dyson was so thankful for my $700 that they included 3 free extra tools on top of what seemed like 87 other tools that came with the vacuum cleaner itself. Guess where all these expensive pieces of plastic ended up? In the floor collecting DUST! (Job security for said V15) I took to Amazon to locate an organizer and found that most required drilling holes in the wall, which we have already established I'm not a fan of. Then I found this one, came up with the idea to attach it to the very generous ONE attachment slot on the Dok (really Dyson?), and VOILA! A place for all of my little preciouses, and no holes in my wall! All attachments clicked in place easily, the two pack of organizers stacked on top of each other satisfies my need for symmetry and color consistency, and all for less than $20. BUY IT, buy it now.

This is a great organzational tool for the accessories that came with the V11 extra. It's organized and everything fit perfect. Although it snaps in place I did secure it to the wall as I didn't want all the weight applied to the V11 wall motor mount. One thing is make sure when seating the accessories that you align them with the slots on the inside of the holders before clipping them in place, otherwise they will get stuck and it will be difficult to remove the attachments. I definately would reccomend this for anyone with small storage or likes to be organized.

With our old Dyson stick vacuum, we just had the standard attachment holder & kept our other attachments shoved in a closet somewhere. No surprise, we never used most of our attachments & the ones we did use were all over the place. When we upgraded, I picked up this rack to fix that. It works like a charm. All of our attachments fit. Including the extra soft brush & long dryer pipe attachment. It's made life so much easier!

It does work (v15) - for the most part but it is too flimsy to my liking. Good idea and it fits most parts that don’t have depth and weight. Probably better to screw it into the wall than to just let it hang from the charging base. You need to juggle the accessories to get them into the holder and aim them exactly so that they will click into the holder. Disengaging an accessory also requires some juggling. I didn’t find a better solution yet but will keep searching. I used a different hanger for the long pole as u can see in the picture.

Funkar perfekt, inget att klaga på

Holds all dyson accessories perfectly ✅ Exact colour match ✅ Fits docking station ✅ Highly recommend ✅

Produit vraiment parfaitLe support mural est solide, bien fini et très facile à installer. Il s’adapte parfaitement à mon Dyson V15 (et compatible avec V12, V11, V10, V8, V7 comme indiqué).Très pratique pour ranger tous les accessoires proprement, ça évite qu’ils traînent partout. L’ensemble est stable et tient bien au mur.Gros point positif : le support est livré avec les vis et les chevilles, donc tout est fourni pour l’installationJe recommande à 100 %, excellent rapport qualité/prix !

L'ho acquistato per il Dyson V10 absolute, avendo necessità di mettere in ordine parecchie spazzole perché oltre a quelle incluse nell'apparecchio ho anche ulteriori 3 spazzole incluse in un kit offerto dalla Dyson e volevo evitare di metterle in una scatola (perché così non le avrei mai usate tutte....). Quindi questo supporto è l'ideale perché è composto di 2 pezzi e dopo aver montato il tutto ho avuto la conferma che viste le diverse larghezze delle spazzole 2 pezzi è il minimo necessario per avere tutte le spazzole a disposizione. Le plastiche sono buone e gli attacchi non mi hanno dato problemi. Ho collegato un pezzo al supporto standard Dyson e l'altro direttamente al muro, come potete vedere dalle foto allegate. Vi consiglio, prima di attaccarli al muro, di provare diverse sistemazioni delle varie spazzole per trovare quella migliore per le vostre esigenze, in modo da non avere sorprese dopo aver fatto i buchi al muro e scoprire che per esempio li avete attaccati troppo vicino ad una parete e la spazzola che volete appendere all'attacco più esterno non entra perché troppo larga... Lo ricomprerei e lo consiglio.

Die **CRAVERLAND Zubehör Halterung** für Dyson Staubsauger ist eine durchdachte Lösung für alle, die ihre Reinigungsgeräte ordentlich und griffbereit aufbewahren möchten. Hier sind einige positive Aspekte dieses Produkts:1. **Platzsparendes Design**: Die Halterung ist so konzipiert, dass sie verschiedene Dyson Modelle (GEN5, G5, V15, V12, V11, V10, V8, V7) aufnehmen kann. Sie ermöglicht es, die Staubsauger und ihr Zubehör kompakt an der Wand zu befestigen, was Platz spart und gleichzeitig die Organisation verbessert.2. **Einfache Installation**: Die Halterung kommt mit allem notwendigen Zubehör für eine unkomplizierte Montage. Benutzer berichten von einer schnellen und einfachen Installation, sodass Sie Ihre Werkzeuge in kürzester Zeit griffbereit haben.3. **Robuste Konstruktion**: Hergestellt aus hochwertigen Materialien, bietet die Halterung Stabilität und Langlebigkeit. Sie hält das Gewicht der Staubsauger sicher und sorgt dafür, dass diese nicht herunterfallen oder beschädigt werden.### Fazit:Insgesamt ist die **CRAVERLAND Zubehör Halterung** eine praktische Ergänzung für jeden Dyson-Besitzer. Sie verbessert die Lagerung und Zugänglichkeit von Staubsaugern und Zubehör, während sie gleichzeitig eine ästhetisch ansprechende Lösung bietet, um Ordnung im Haushalt zu schaffen. Ideal für alle, die Wert auf eine effiziente und saubere Umgebung legen.