10-In-1 Multi-Tip Folding Magnetic Pocket Screwdriver with Carrying Clip and Bottle Opener, Includes 3/16" and 1/4" Slotted, PH1, PH2, T15, T20, S1 and S2 Bits

I absolutely recommend this is do commercial hvac and use this every day i dont have too go into my tool bag to get my tools for a screwdriver, all the bits are easy access so I can use them for other things like my impact and the megnetic backing is great too stick this tool onto the unit when I have too use a different tool 💯 recommend this

This is a great screwdriver. My only recommendation is to take off the square extension and put a round one on. The square one can be difficult in tight spots. The round one has been perfect on this. I work as maintenance in a machine shop. I use this on some tough screws. Even using the handle as leverage at a 90 degree angle, it holds up great and takes the extra pressure. Great design, wish it held more bits.

It comes in handy more often than I thought. It fits right into your pocket and feels good in my hand. The only gripe I have with it is the extension neck is loose and tends to fall out. I fixed that by putting a rubber band around it when it’s folded. I tend to use it without the extension to avoid it from getting stuck in a tight screw. 4 out of 5 for the extension being loose.

I carry many tools with me for work every day. This has been a good addition to my edc. I want to do 3.5 stars but since that's not possible, I can't quite bring myself to give it a 4. That said, I really like this a lot. Problems it has, the extension that comes with it doesn't stick to the magnet at all, it falls out and will get lost. Additionally, since the extension is square, it doesn't turn well I'm tighter spots. I had to change wires on a contactor block that had auxiliary contacts on top and the square shape made it too tight. All of these issues were resolved by buying a 1/4" impact extension that was the same length. Now this tool is perfect for me. I also like how I can change out the bits since I regularly use different tamper proof bits. These bits also work with my low pro right angle screwdriver so I was able to stop carrying the rail that held all of those bits.

It does what it was bought to do. Compact tool to slip in work bag

Works fine. Seems like a good tool.

This is a great basic concept, let down by some poor design choices and a lack of quality workmanship. The main flaw, and the one that basically ruins the tool, is that it can't hold onto its bits. The magnet in the driver is just extremely weak, and bits/extensions sit pretty loosely inside of it. This means that they just don't stay in, rendering it pretty useless as a screwdriver. I know it's only $25, but if you're not going to get that part right, why even bother? It's also a lot bulkier than it needs to be. The body doesn't need to be so chunky—the thick plastic scales serve no real purpose, the driver doesn't need to be a heavy square lump, and it would be easy to redesign the whole unit to be about 3/4" shorter. For an EDC-oriented tool, that's annoying. I've got full-featured, hunka-chunka multitools that are slimmer in the pocket than this. It's big enough to make me not want to keep it on me. So close to being a great tool. It would have taken so little effort to make a slimmer, higher-quality version of this exact same design, and I doubt it would even need to be more expensive. It's like they had a good idea, but then the people they gave it to to turn it into a product just didn't really care.

bought one of these and the magnets came loose one day, and then all of them eventually. emailed per diections on their website and got a brand new one and the magnets are all good months later.

Magnet weak

純正の？四角いエクステンションバーが、イマイチでした。マグネットが弱く、狭いところで回しにくい。本体は結構重いためか丈夫です。ビット長は25mm、HEXビットは6mmまで内臓可能、1/4ソケットアダプタは太すぎて入りません。 今はビットをつけた時に、本体とツライチになるようエンジニアのDR-322を短く切って使用。これで見違えるほど使いやすくなりました。また、DR-322にビットをつけたままにしているので、ビットを計9種類持ち歩けます。プラスの1から3、マイナスの4と6mm、HEXの3〜6mmがこれ一つで済んでいます。 使用感ですが、とても良いです。 ポケット入れておいて、サッと出せる事が最高です。ツーリングの時にもポケットに入れてます。他の工具はバイクに収納しておけばOK。もちろんアダプタを付ければソケットも回せます。フレームは金属製で、意外と捻れずトルクもかけられます。また、赤い部分はプラスチック製なので、冬でも冷たくないです。ただ、高いですね。海外サイトで検索するとお手頃価格で買えそうなのに、残念。 ですが、私にとって公私共にかなり重宝しているので星5です。 国産で作って欲しい工具です。

The square bit holder may cause issues but just use an extension. Otherwise I love the design and weight to it.

Great idea executed in the cheapest fashion possible the magnet started falling out within a couple months

As you can see from the video the magnet that holds the extension is prone to fall out. Other than that, feels solid, and it's pretty useful. They just need to improve the magnet.