OOWOLF 25W Dimmable LED Ceiling Light, Upgraded Modern 15.7in RGB Close to Ceiling Lamp Fixture with Remote for Bedroom,Living Room,Kitchen,Dining Room

Nice looking and bright light. At first I could not get the remote to work, I contacted the seller, and they emailed the same day saying to search for "CT00 OOWOLF" videos on YouTube. There I found a video showing installation of the battery. What is clearer in the video than in the pictures is that one of the wire loops needs to go over the top of the battery. As soon as I saw the video, it became clear, I tried it, and the remote worked. The installation was not difficult. I liked the modern way the power wires connect without twist caps. I've wondered why fixtures still rely on twist caps rather than some kind of plug. Cost is the obvious answer, but still. This design nails it. The light can do a bluish white or a warmer yellowish white. Great feature. Plus three colors: red, blue, and green. The plastic materials seem cheap to the touch, including the remote, but once it's installed and working it looks and functions great. Compared to similar lights on the market, the value seems reasonable. I highly recommend and would buy again.

The lamp itself is great. The remote control packs many features and light settings. There are several colors to choose from and the day or night light can be dimmed to preference. I had an issue installing the lamp due to the existing box in the ceiling was not compatible with the hardware for this lamp. But that doesn’t seem to be common problem according to the other reviews. Just on my side. Once I got the ceiling box replaced it was a breeze to install.

First off, I am very happy with this light. It does get very bright--much brighter than the fixture with two 60-watt bulbs that it replaced. I put this in what will be my basement gaming room, which is why I wanted the RGB colors. Pros: 1) Very bright. Reviews that say it doesn't get bright; I can only assume they couldn't figure out the remote, which is understandable, as the instructions are in mangled English. 2) The globe has embedded sparkles. I wasn't aware of this from looking at the product photos, but the globe looks very nice. The embedded sparkles really add to the appeal of this light. 3) Multiple color modes. I'll go into this in more detail later. 4) Colors look great. 5) Remembers your last color setting when you turn the light on. 6) Remote come with battery installed, plus a spare. Uses CR2032. 7) Remote did not require any setup or pairing. Just works. Cons: 1) Instructions are very limited. Clearly English was not the first language of whomever wrote them. 2) Installation was difficult to figure out. 3) Once installed, the light does not sit completely flush against the ceiling. See photos. It attaches to a puck which houses the circuitry, and this puck is what mounts to the ceiling, putting the actually fixture about an inch away from the ceiling. Which wouldn't be a huge deal, if not for the fact that... 4) Exposed wiring. See photos. The light connects to the puck with wires that are not concealed. And the wires that connect to the house wiring are also not totally concealed, although I did manage to hide them a little bit by routing them through the mounting plate. See photos. 5) Light is 100% plastic. The globe is not glass. Although you can't really tell once it's mounted. Installation tips: 1) Disconnect the light from the puck before you begin. 2) Using the three provided short screws and nuts, mount the circular metal mounting plate to the puck. Make sure the grounding nibs are facing away from the puck. 3) If you want to hide the house wiring connector wire, remove the connector from the end, and route the wires through one of the outer rings on the metal plate. 4) Once you have the plate/puck assembly ready to go, it should easily mount to your existing junction/fixture box with your existing screws. 5) If you plan to use the provided house wiring connector block, you will need to make sure only a very small length of copper is exposed on your house wiring. About 1/4 inch. So you'll need to snip them, most likely. Or, if you want to use wire nuts, you'll need to strip the wires on the puck a bit more. 6) I haven't done this yet, buy I plan to buy a "ceiling light medallion" from the local hardware store to conceal the exposed wiring. Remote operation: 1) The circular pad controls the brightness (up/down) and adjusts the color temperature from cool to warm, when in white-light mode (left/right). 2) The button in the center of the pad returns the light to its default bright white mode. 3) There are two memory buttons at the bottom. Put the light how you want it and hold one of these buttons for three seconds, and the current mode will be programmed to that button. 4) The "wifi"-looking button is for pairing. If the remote does come unpaired, or if you want to pair it to another light: Within three seconds of providing power to the light, press the pairing button once. If it pairs successfully, the light will blink three times. 5) The "snowflake/sun" button (represents cool and warm color temps) puts the light in white light mode. Color modes and buttons: There are two color mode buttons. One of them starts the light cycling through a wide range of colors at slow speed. You can leave it cycling if you like, or, when it reaches a color you like, you can press the button again and it will stop at that color. You can program this color to a memory button, if you want. The next color mode button cycles through the following modes: Red Green Blue Pulsing red (slowly dims then brightens) Pulsing green Pulsing blue Rapid changing random colors (changes 3x a second) Pulsing changing colors (pulses a color once, quickly, then changes to another, pulses, etc.) Strobing effect (flashes between red green and blue very quickly) In summary, this light did have some drawbacks and installation challenges, but they can all be overcome. Once you get it properly mounted, it looks great, and the performance/versatility of the light is excellent.

I am very impressed with this light. I bought two and am able to control both with either control. So I have one next to the table and the other in the door enterance. I am enjoying having a remote to control the lights. Not only do they look great, they work incredible. The remote has an on and off button, but you have many more options. Don’t like bright white light, want a warmer control you can do that. Want to dim the lights? You can do that. Want a night time mode? It has it!! Want colors? Also here. What else can I say except fantastic‼️

As an old friend from the Dallas Fort Worth Caving Grotto used to say, "Cheap and worth it." The light does illuminate, so there's that (although I've noticed that several Chinese LED products I have dim after only a short period; since this is brand new, I cannot speak to long term performance). And I did have it installed and functioning within an hour of finding it on my front porch. Aside from the obvious typographical errors in the literature and the general sparsity of helpful information, the main difficulty I had was in mounting the light. It comes with a circular mounting bracket that has the same diameter as the four-inch round ceiling box where my existing light was hanging and which is of typical size and construction in the United States. It appears that the designer intended that the circular light module mount flat against the mounting bracket. This may seem workable at first, but the cable which connects to hot and neutral in the house must be run up and behind the mounting bracket. Because the module is against the mounting bracket and the mounting bracket is against the ceiling box, there is no good way to set this up. This could have been easily solved with a small design change, by bringing the connecting cable directly out the top of the module, but it wasn't. As with many poorly designed Chinese goods, you'll have to be creative (something that mere copycats are not usually good at). Of course, I must admit the possibility that I missed a simple installation configuration and the problem lies with me. If that is the case, please reply and let me know where I went wrong.

I love these lights! I purchased 2 for my hall and they are so much fun! Only downfall is That I can’t get both remotes to work together. I have one mounted on the wall but at the other end, I only have the switch. I can only program one remote or the other

I have installed hundreds of lights, ceiling fans, outlets, switches in my life. THIS was not easy to install, I actually didnt install after trying and returned item. 1. The metal ring you are supposed to attach to ceiling did NOT line up with the holes/screws for in junction box(Standard US box in 2 year old house) 2. There was no way to attach the light electrical box to the supplied ring. No screws were supplied, the holes on the two items do NOT line up either, so even with screws it was not possible. 3. Even despite the above, if those all worked, the way to connect to the wires was not clear at all. Wire are L and N, I assume for Load and Neutral, however they are attached to a small box you are supposed to wire into. Typical 14 gauge wire is too big for this little wire box connector. Finally there is NO GROUND WIRE, so that could be a huge issue. 4. This product feels and looks very cheap, absolutely not worth the $55 I highly recommend you do not purchase.

The instructions were sort of nonexistent, but it was still very easy to install. The part I had trouble with was figuring out how to pair the remote with only one light. I found the instructions in the product description above and voila. Piece of cake. The colors are very pretty and it actually looks like it's sparkling.

Bought this light fixture for my cousin's children and they loved it. I bought them the first fixture and unfortunately there was a faulty wire so I had to return and repurchase this item. They gave it another try and it was easy to install and was working fine. It has many colours and cool and warm colour tones that you can adjust for your needs. The kids loved the colour changing as if there's now disco in their bedroom. Is fun and is like interactive. The remote wasn't very sensitive when changing the different modes and it was hard to figure it out at first.. but the kids were smart enough to figure it out themselves. You have to turn the light switch off then you press what mode selection you want on the remote, then you switch back on your light switch on the wall... it would then adjust to the mode that you've selected. The kids really love this light fixture and the colour changing modes.... also is a great light for studying and a great night light for sleeping. They light fixture also has some sparkles on it.

My hubby installed it in 30 mins so it’s really easy! Very light weight , you can hold it in one hand and it makes the installation easier! It has different mode on controlling the light color and brightness! My boy loves it so much! It can be the reading light but also night light so it is really convenient! You can control it by using the remote instead of get out of your bed!!!!!

It took a little too long to arrive and when I asked the supplier for an ETA they didn't reply. The product was quite easy to install. I personally didn't have any trouble. The remote control is a little confusing though and I dislike the fact that it takes approximately 5 sec for the lights to turn on after you press the switch. The white/yellowish are quite bright, but the coloured options need some extra lightning with it because they aren't veeeeery bright..

The light is nice looking, when holding it it feels rather cheap and flimsy, because its all plastic. It connects pretty easy but you have to push a little ballast up into your light box. They provide a piece that has holes in it so it probably attaches to light boxes in different jurisdictions. If you have a dimmer switch connected to this light the light it effects any other LED lights you may have on the circuit. Once I switched out the dimmer switch to a normal switch it worked fine. You can use the remote to control the dimmer as well as the colour.

This light, if you can get the remote to work properly is really nice. However after a few hours of deciphering and trying to make it work just as a normal light, we gave up. 5 different people took a crack at it. Each time we turned it on, it decided to do something different. whether we used the light switch or the remote, it was the same. The OFF button on the remote was hit and miss. Sometimes it worked and sometimes it did nothing. Sometimes it just changed the light but never shut off. At times, the brand new Lutron LED switch, buzzed like a bandsaw depending on what this light was up to. Would avoid this until they modify their instructions to be more legible and fix the firmware. Wasted way to much time. As for installation, the wiring came with the easy connect plug already attached. Why? It is useless in most wiring situations. AS for installation instructions, you can barley make them out as it is faded and in need of larger font. A pill bottle has larger fonts.