Case for Raspberry Pi 4 with Fan Cooling Pi 4B Case with 5V 3A Power Supply, 4 pcs Aluminum Heatsinks Support Pi 4 Model B 8gb/4gb

Layered acrylic cases seem to be a dime a dozen these days - everyone is making one, and not everyone is making them well. They put together loose and sloppy, and are hard to get lined up tight with clean edges. That's not the case here. This case was clearly well thought out from bottom to top - each layer is precisely molded to the components on the Raspberry Pi 4 to ensure a great stack. This definitely means you aren't going to get a Raspberry Pi 3 into this case, but it also means you are almost guaranteed to get super clean looking edges once your stack is complete. The fan is very quiet, even on 5V. I tried switching it to 3.3V, and I honestly couldn't hear a thing unless I put it up to my ear to listen. The two videos attached barely have the fan audible - this was the best I could capture! Keep in mind that the video was shot about six inches from the Raspberry Pi in an attempt to pick up audio. At a more reasonable distance, you cannot hear the fan at either 5V, or 3.3V. The pictures attached show the unboxing, and various stages of the build process from start to finish. The good: - It looks amazing, seriously. This is about the best looking layered case I've put together. - The included heatsinks and power supply make this case go from a good deal to a great deal... you're not going to need to add anything except an SD card, a micro HDMI cable, a keyboard and a mouse to get up and running. The neutral: - Pay attention to the (fantastic) instructions. Don't get ahead thinking you need to install the heatsinks first. These instructions really are clear about when you need to do what. If you've done this many time before, you'll be tempted to just "wing it". You may end up installing heatsinks in a way that will make the layers not line up. - The wires on the included power supply seem a bit thin, but it's only carrying 5V @ 3A, and it IS marked as UL listed... so they must be correctly. For reference, The wire on the official Raspberry Pi power supply is about 3x thicker. The bad: - I had no bad experiences with this kit, I am really happy with my purchase. Verdict: Highly recommend. As soon as I buy another Raspberry Pi 4, I'll be buying another case - guaranteed!

It’s one of the best cases I’ve used. The sleek, clean look makes it perfect for a desktop setup, and it comes with everything you need to protect and cool your Raspberry Pi right out of the box. Pros: ✅ Sleek & Minimalist Design – Looks great on any desk and fits well with other tech gear. ✅ Great Cooling – The built-in fan and aluminum heatsinks keep temperatures low, even under heavy workloads. ✅ Easy Assembly – Everything aligns perfectly, and installation is quick and hassle-free. ✅ Includes 5V 3A Power Supply – No need to buy an extra adapter; the included power supply is stable and reliable. ✅ Strong & Durable Build – The case feels solid, providing good protection for the Pi board.

This is a great little case. I didn't pay much attention to what I ordered, honestly - it was a Pi4 case and it came with power, so it was an impulse buy so I could start using my Pi safely. Nobody will really see it once deployed. That said, when it came it, I was pleasantly surprised. The case isn't a two-piece case - it's actually a series of stacked plastic parts each precision cut for its place in the case with the 4 corner screws holding it all together. The Pi isn't mounted anywhere - it just fits in it's strategic spot and doesn't move once it's assembled. The fan comes with instructions to hook it up two ways - to 3v or 5v for whichever speed is desired. I built mine with the 3V and it's pretty quiet. From 1ft away, I don't hear it. The heat sinks fit perfectly. There are feet and nuts from the assembly bolts so there's space and wall-mount holes - it'll stand off the wall roughly 1/4" so airflow will be good. The power supply works with what I assume is one of the early Pi4's that probably has the power issue (early Pi4s report incorrectly to some USBC power supplies and won't work). All in all, no issues and I'm happy with my purchase... and bonus, it does look great too!

Overall, both the case and the included accessories are good quality, and they look great too. The electric blue heatsinks really pop and give some nice color and contrast to the rest of the Pi. The instructions are pretty clear, but there are some things to watch out for when assembling the case. Since this is a multi-layered case, it will take longer to assemble than other simpler styles of cases If you're after the aesthetics of a layered case, though, it's worthwhile. The 2nd and 3rd layers from the bottom are thin at certain parts, and could snap if you aren't gentle with them. Also, it's best if the fan is installed with the wires coming out of the corner near the USB-C port, so they don't interfere with the closure of the case when plugged in. I read a review that said someone had issues plugging their micro-HDMI cable into the Pi in the case, but I had no such trouble. There were an extra 1-2mm before the connector rubber would have touched the case. I can't see any micro-HDMI cable being an issue unless it has excessively thick rubber around the connector, or if its connector is sunken into the rubber too far, neither of which should be a worry with a quality cable. The power supply provided power with no problem, despite the Pi 4's notorious compatibility issues. Aside from the fan wires and the fragile 2 case layers, this was a 5 star case.

The fan is quiet, and the overall look is good with holes for the GPIO and the camera ribbon, as well as easy access to the SD card. The overall fit is good as well around the pi 4. The power supply works well and the on-off switch is really nice to have. Of the whole thing, the only part that I didn't like was the assembly. This is several layers of plastic that stack, which works for the job, but they move independently when trying to get it all together, which makes getting the screws in and it together kind of annoying. Once you have it together there is no more issue...unless you need to open it to change/add a ribbon for the camera. Still, for the most part, I like it.

I love this case this is the first one I have gotten for myself and I just love the sleek design and it is easy to assemble.

All inclusive case and accessories for your Raspberry Pi 4. Perfect fit...good quality, sturdy parts. Excellent directions. Much better than expected for hte money. Power supply has an on/off switch which was an upgrade from the Pi I had. It is a quality looking clear case. The heat sink and fan work perfect. Would buy again easily!!

I got this for my pi4, and it’s very useful as it look more like a mini computer rather than an ugly green usb hub that I have to worry about because of the possibility of it shorting on every single piece of metal on my desk. The included power adapter is very useful as it prevents me from looking like an idiot by crawling under my desk every time I want to turn the pic on and off. The fan is also silent and prevents the pi from overheating constantly. TLDR: a very nice case, and the included fan and power adapter are a nice addition.