Cold Steel C-Clip Small (Pack of 2), Black

Great addition to the Mini Fixed Blade Sheaths from Cold Steel and likely others. There are no instructions for installing these included in the packaging, just the contents and quantities. The Four thinner discs are washers, not spacers. They are there to prevent the screw head from popping through the slotted portion of the clip screw holes. The spacers are all the same size and I'll have to cut them down so the clip is closer to the sheath, but even with the gap shown, it's on there solidly. When I do that, I'll apply some Blue Loc-Tite to the screw threads to prevent them from unscrewing during use. I was able to use this pack to mount clips on Two different knives. It clips on to my belt quite securely and is very hard to remove without removing the belt from my waist. These are made of the same plastic Cold Steel uses in their Secure-Ex sheaths, so I'm sure the durability for these will be off the charts. They match the sheath perfectly and the multiple hole positions insures a fit on just about anything. I will definitely be buying more for my other knives, even some non-Cold Steel blades.

Works well, I have it on my coldsteel mini leatherneck clip point

I have owned dozens of knives with a variety of different belt clips. The Spyderco G clip is one of my favorite solutions. I had another sheath that needed a clip, so I purchased these Cold Steel clips knowing little about them because they are a fraction of the cost of the Spyderco (I could currently get 4 of these and have a few dollars spare change for the price of 1 Spyderco). When they arrived, I was quite pleased with the clips themselves. The spacing of the slits allows for versatile mounting and the clips seem to have a decent tension and are sized nicely for smaller sheaths. I'm happy with them. However, the mounting hardware that came with the sheaths was sub-par. Again, I have owned many sheaths with hardware as points of comparison, and the Chicago screws and spacers shipping with these Cold Steel clips is the worst I have seen. The diameter of the screws and screw heads make this way less sturdy. I swapped out the hardware for some other Chicago screws I had on hand and the results were much better. I definitely recommend these clips if you have other hardware laying around. If not, then my recommendation is a bit less enthusiastic. I'll note that I did not buy this for a Cold Sheath, so perhaps the smaller and less sturdy hardware is a compatibility choice for certain small Cold Steel models.

Pretty disappointed with this product and its application on the cold steel double agent. I am using the small version as indicated in the description of the product before purchase. Application of pressure to secure the screws at the top/entry point of the scabbard, if tight enough to hold the screws together, keep the knife blade from separating from the scabbard. I am not quite sure exactly how this is intended otherwise but I followed the cold steel YouTube video for installation. For $5 returning this product is a waste of gas to the post office. I hope I can find some other use for it or figure out a better application to the double agent. Very small screws (Chicago screws I believe they’re called) and a small opening in which to work exacerbate the process. As a neck knife The double agent is a little large, but it’s blade holster has grommet holes which can be used to attach it to gear including plate carriers or bags with MOLLE straps and paracord. Admittedly I am not a mechanical or coordinated person manually but this is as simple as it gets and doesn’t seem to work very well for me. Knowing what I know now I would not buy it again. The knife is nice t admittedly I am not a mechanical or coordinated person manually but this is as simple as it gets and doesn’t seem to work very well for me. Knowing what I know now I would not buy it again. The knife is nice though.

Good affordable clips that can be worn on almost any clothing item. Works well with jeans, with a belt, or even throwing it over the waist of sweat pants. Retains the knife on the belt well with the ability to slide and adjust. I really like the Spyderco G-Clips, but at 20$ a clip, and I can't stop buying knives, had to find more economical solution. This is a decent option. Not nearly as "nice" as the spyderco, but functional at a 1/4 the price.

One of the clips broke while installing and the install was so troublesome I decided to continue to use it despite it being cracked. Another clip was provided but not enough hardware to use the second. Cold steel should design their knife sheaths with a clip, or make something with an easier install process. Overall, great knife okay sheath, unsatisfactory clip.

As titled; these C-Clips; once they go on your belt, they are NOT coming off without some very concerted force & effort, and maybe a curse word or two. :-) This is a very GOOD thing and is exactly what you should want in a product like this. If you want something that you are going to be donning & doffing frequently, you might want to look elsewhere. But if you want to know that whatever you mount this to, is clipped on your belt absolutely as secure as possible, buy these Cold Steel C-clips!! I mean; it's not *that* difficult to remove, but you definitely have to know what you are doing & it takes 2 hands. They came with hardware & all the stuff needed to throw them right onto a cold steel spike. Very nice clips, going to get the large ones next. Buy these.

These belt clips are the most versatile and adjustable of any I could find. (It sure would be nice if the industry could standardize the spacing of holes on the edges of Kydex knife sheaths.) I’m thankful for the adjustability. But keep in mind that you will be juggling a screw, a washer, a spacer, a ‘nut,’ the sheath, and the clip. You’ll need three hands, two small screwdrivers (magnetized is great), good lighting, and your neighbor Larry’s extra hand as well to hold everything in place while you get the threads started. But I now have a sturdy horizontally mounted small knife at my waist. I’m trying that out some days instead of a folding knife for everyday use. One of the main reasons I got this was that I can slip the sheath on and off of my belt between the belt loops without threading the whole thing onto the belt ahead of time. Works great!

Alles ist genau so,wie beschrieben,ich benutze es für mein cold steel mini leatherneck und bin sehr zufrieden damit, meine Empfehlung.

Parfait pour mon mini Coldsteel

The Cold Steel C-Clip is durable and reliable. It stays securely in place and is easy to install. A solid choice for anyone needing a strong, high-quality clip.

Un tamaño justo para cuchillos Con funda Secure-ex pequeña (habitualmente son cuchillos para llevar colgados del cuello). Así se puede ajustar al cinturón firmemente. Viene con 2 tornillos y 2 2 tuercas para cada clip, así como un montón de espaciadores que no son de utilidad.

Gute Qualität