--- product_id: 394291667 title: "Creality 4.3\" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation" brand: "f1rst layer" price: "389 zΕ‚" currency: PLN in_stock: true reviews_count: 3 url: https://www.desertcart.pl/products/394291667-creality-4-3-touch-screen-with-f1rst-layer-firmware-ender store_origin: PL region: Poland --- # 4.3" Touch Display Faster Operation Open-Source Firmware Creality 4.3" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation **Brand:** f1rst layer **Price:** 389 zΕ‚ **Availability:** βœ… In Stock ## Summary > πŸš€ Elevate Your Printing Game with the Ultimate Touch Screen! ## Quick Answers - **What is this?** Creality 4.3" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation by f1rst layer - **How much does it cost?** 389 zΕ‚ with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.pl](https://www.desertcart.pl/products/394291667-creality-4-3-touch-screen-with-f1rst-layer-firmware-ender) ## Best For - f1rst layer enthusiasts ## Why This Product - Trusted f1rst layer brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Key Features - β€’ **Enhanced User Interface:** Navigate with ease thanks to an improved UI. - β€’ **Upgrade Your Experience:** Transform your Ender 3 with cutting-edge features! - β€’ **Plug-and-Play Convenience:** Seamless installation for instant enhancements. - β€’ **Future-Proof Compatibility:** Ready for future upgrades like BL Touch. - β€’ **Community-Driven Innovation:** Join a vibrant community with open-source support. ## Overview The Creality 4.3" Touch Screen is a revolutionary upgrade for Ender 3 series printers, featuring fully open-source firmware developed in collaboration with Insanity Automation. This touch screen enhances your printing experience with a user-friendly interface, faster operation, and compatibility with advanced features like dual gear extruders and mesh bed leveling. Designed for easy installation, it’s the perfect solution for those looking to modernize their 3D printing setup. ## Description FIRMWARE CAN BE FOUND VIA SCANNING THE QR CODE/TYPING IN THE URL ON THE INSERT CARD THAT COMES WITH THIS PRODUCT. COMPATIBLE WITH ENDER 3 / 3 PRO / V2 / MAX / 5 / To update firmware on your 4.2.7 board, please make sure you use an empty SD card formatted to FAT 32. Place the firmware .bin file on to the empty SD card, insert it into the 4.2.7 board, turn on your printer and the firmware should automatically update. Make sure you follow the instructions on the insert card to find our firmware catalogue whole process of updating firmware should take 5 minutes from start to finish. Please refer to the wiring diagram in the product pictures when installing a BL Touch on a 4.2.7 control board. Turn your Ender 3 from 2018 into a brand-new state of the art machine with silent stepper motor drivers, color display, and auto bed leveling functionality. NOTICE: The firmware for this screen is open-source Marlin and DOES NOT work with the stock Creality firmware designed for this touch screen unless you flash Crealitys firmware back onto the screen. This screen will work with a 4.2.2 board if you flash Creailtys firmware back onto the screen. customer support is NOT suited for providing the Tech Support needed for this 3D Printing product PLEASE CONTACT F1RST LAYER if you are having any issues with this product! Creality have not updated their firmware ONCE since the release of this product in 2020. First Layer will push semi-annual updates to our GitHub, Google Drive and Facebook as new Marlin features are released ## Features - This Ender 3 touch screen is fully open source thanks to a partnership between First Layer with Insanity Automation. This screen comes from the factory flashed with our custom firmware for more features than ever. Now supports dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders. This product is an Ender 3 display screen ONLY, no control board included. - A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 on the market. Along with more added features than any other touch screen available today, this is THE best version of this product available on desertcart right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen - Compatible with Ender Series printers as direct swap for your older stock screen IF you have a 4.2.7 32-bit silent control board. This screen does with 4.2.2 boards however you will have to flash Crealitys firmware onto both the board and the screen. Crealitys firmware is not compatible with Ender 3 Max / Ender 5 and Ender 5 Pro. - Realistically Creality should have updated their Ender Series screens years ago but haven’t. Their firmware catalogue is also outdated and basic, ours is not. We invite you to browse are extensive firmware catalogue on our google drive and view videos on YouTube regarding this screen and our firmware. This upgrade is the equivalent of upgrading your phone from a Nokia 3310 to an iPhone. - First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open source potential! This kit is completely Plug-and-Play and enhance your Ender 3 with previously unavailable features, while also allowing for the BL Touch upgrade in the future if you want to install it. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Stock Creality firmware for the 427 board WILL NOT work with this screen ## Images ![Creality 4.3" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation - Image 1](https://m.media-amazon.com/images/I/51QQbyg28BL.jpg) ![Creality 4.3" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation - Image 2](https://m.media-amazon.com/images/I/512mqzADpgL.jpg) ![Creality 4.3" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation - Image 3](https://m.media-amazon.com/images/I/51viBBIuepL.jpg) ![Creality 4.3" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation - Image 4](https://m.media-amazon.com/images/I/51viBBIuepL.jpg) ![Creality 4.3" Touch Screen with F1RST LAYER FIRMWARE for Ender 3/3 Pro / 3 V2 / 3 Max / 5/5 Pro for 4.2.7 Control Board ONLY with Upgraded Open-Source Firmware - Improved UI and Faster Operation - Image 5](https://m.media-amazon.com/images/I/51dbvvr5S8L.jpg) ## Customer Reviews ### ⭐⭐⭐⭐ Quieter than the 8 bit board. Firmware source is not available from Creality. *by M***R on Reviewed in the United States πŸ‡ΊπŸ‡Έ on January 15, 2023* I had upgraded my old Ender3 Pro to the BTT SKR mini e3 v1.2 a while back. I was trying to review the Creality Sonic Pad and it was challenging to get the SKR to work. I decided to 'downgrade' my board slightly to the Creality V4 'silent' board and then tell the Sonic Pad that my printer was an Ender3 V2 4.2.7. (an option available on the sonic pad that doesn't require much work) In the end this worked. I have it running Klipper firmware now and although it seems that the steppers are a slight bit louder than when I ran them on the SKR mini, they are pretty darn quiet. (much quieter than the 8-bit board for sure) The board is running Klipper so its job is very limited now. It primarily controls the steppers and the heavy lifting is being done by the 64-bit ARM chip in the Sonic Pad. The Sonic Pad is pretty sweet. It is large, the touchscreen is great, the Klipper features and web interface are excellent.This was the easiest way for me to get this up and running. I did however have some issues with the CR touch. I was using a cable that had 5 pins on the CR touch side and a 2 pin JST connector and a 3 pin Dupont connector on the motherboard side. I ended up having to cut these off and make a 5 pin Dupont connector that fit in the BL Touch port on the mainboard. (A JST connector would have even been better, it is designed for a JST connector) It took me a while to figure this out and without access to the source for the firmware, I didn't know if I could use the 2 pin Z axis limit switch pins or not. I finally decided that since they added a 5 pin connector for the BL Touch (CR Touch in my case) that this is what Creality is probably using on the newer Ender3 line that uses the V4.x mainboards. The only thing I have not figured out is where to connect the main board cooling fan but I have not tried very hard yet. (it may only come on when it is needed) I would have preferred to stick with the SKR mini. The documentation is better, the firmware source is readily available and it seems a tiny bit quieter. The SKR mini also supported the TFT 35 touch screen that I bought years ago and the Creality obviously does not. I am not sure if I can change the current of the steppers with the TMC2225 drivers in Klipper and I do not know if they are in standalone mode or UART. (though I will find out at some point) I put a smaller NEMA 17 on the printer for the extruder and I actually increased the current to get it to run a slight bit cooler. (based on my infrared thermometers at least) All of my tuning is now gone and I am in the Klipper firmward world. Time to learn new things. ### ⭐⭐⭐⭐⭐ Get rid of that annoying dial! *by J***Y on Reviewed in the United States πŸ‡ΊπŸ‡Έ on October 12, 2022* I picked this up for an Ender 3 Max, knowing it wasn't made for Ender 3 Max but it was supported. Setup is not too terribly hard. You have to attach some wires to your motherboard, which requires you to open a panel, remove some glue from the current wires attached to the board, pop them off, and then put the new wires on. This shouldn't be too hard for anyone who has even basic experience with building a PC or maintaining a 3D printer.Getting the correct firmware on the device was a little tricky but the reason why is because they have customized it to match your precise hardware configuration. It'll work on either version of the motherboard, with the auto-levelling device or without, and a number of options besides that.I couldn't be happier with the touch screen. The dial used to drive me nuts because you'd spin it, it might go fast enough, might not, might go backwards instead of forwards. No more! Now nearly every interface in the touch screen allows you to type in whatever number you want directly. Those that do not use a simple +/- type interface. It makes dialing in your settings a breeze.And did I mention their auto-levelling screen? After running their auto-leveller, which, automatically heats the surface like you're supposed to, it shows you how level the bed is. I tried to get mine perfect manually with a level and it was wildly off. The auto-levelling screen told me that and that information allowed me to get the bed almost perfect, which makes printing much easier, obviously.There are a ton of efficiencies to be gained with this screen. Some of it just simple stuff like when it preheats for PLA, it can do the nozzle and bed at the same time without you having to manually select a temperature for the nozzle. And setting the Z-Offset is wonderful. It allows a level of granularity far deeper than was available with the original screen.My only gripe with installing this on the Ender 3 Max is that the screws they used to put the screen on were pretty fiddly. It took several tries and a bit of luck for me to get it attached right. The other thing is the original screen is also the endcap for one of the main bars (not sure what they're called). So you lose the endcap. That said, I am sure one could just be 3D printed, I just haven't tracked down an STL yet.Oh, almost forgot to mention but their customer service is astounding. Though they're based out of China, so you do have to wait a day to get a reply from them, their answers were well-written and thorough. They also put up with me asking a ton of them over a device that really wasn't that expensive in the first place. They were willing to replace the device entirely because I couldn't get it to work until we mutually realized that the motherboard is a 4.2.2 in an Ender not a 4..2.4. WOOPS!Seriously, do yourself a favor and get this screen!! ### ⭐⭐⭐⭐⭐ Great customer service! *by H***O on Reviewed in the United States πŸ‡ΊπŸ‡Έ on January 20, 2023* So I also got the Creality Touch screen from F1rst Layer. Amazon cannot tell the difference between the main board I got earlier and the Touch Screen I just got. That's why my review lands here.The important part: You can get the parts all over, but it's really hard to get the firmware. Unless you deal with these guys, because they got the goods, they got the firmware, and they got the best customer service I've had the pleasure of dealing with on Amazon. Period. Buy from these guys, easily get the right firmware, and if you have a problem they answer your email. And not with a scripted or robotic response, they email you back and it's obvious that the support guy has read AND UNDERSTOOD your whole email!! (Thanks, Jeff!)I purchased this board because I needed the correct drivers for my CR touch/Ender 3. F1rst layer has the goods, I installed the proper firmware, but then had a problem specific to my machine. I contacted F1rst Layer, and Jeff responded with an answer that confirmed to me that he had read and understood my rather lengthy text. We figured out my machines problem (the adjustable pulley adapter was reducing total X travel) and it was a great experience getting GOOD tech support in a timely manner. I'll be dealing with these guys for future 3D stuff because the got the goods, and they have Stellar tech support! --- ## Why Shop on Desertcart? - πŸ›’ **Trusted by 1.3+ Million Shoppers** β€” Serving international shoppers since 2016 - 🌍 **Shop Globally** β€” Access 737+ million products across 21 categories - πŸ’° **No Hidden Fees** β€” All customs, duties, and taxes included in the price - πŸ”„ **15-Day Free Returns** β€” Hassle-free returns (30 days for PRO members) - πŸ”’ **Secure Payments** β€” Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** β€” Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.pl/products/394291667-creality-4-3-touch-screen-with-f1rst-layer-firmware-ender](https://www.desertcart.pl/products/394291667-creality-4-3-touch-screen-with-f1rst-layer-firmware-ender) --- *Product available on Desertcart Poland* *Store origin: PL* *Last updated: 2026-11-03*